5.2 Inserting a microSD memory card (not included)
To operate the scanner, you must insert a microSD Card (not supplied) to record
and store your pictures. Inserting the microSD memory card:
1. Turn OFF the scanner.
3. Explanation of the status icons
PDS-ST410A-VP Manual
1. Key features
Color /Monochrome (Mono) scan selection
2. Insert the microSD card into the microSD card slot (with metal side facing up).
Gently press in until card is clicked in and latched. The SD card indicator
must appear on the LCD screen.
Note: - Do not force the card into the slot; forcing may damage the scanner and the
microSD memory card. Align microSD card position and try again.
600/300 dpi scan selection
Directly save JPG file to microSD card
Item
1
Function
Description
Supports microSD/microSDHC card up to 32GB
Driver free to download for Windows® XP, Windows® Vista™, Windows®
7 and Mac OS® 10.4 or above (direct plug-in, driver installation not
required)
5.3 Formatting the microSD memory card
Note: All content on the microSD card will be erased during formatting. It is
recommended, but not necessary.
1. Insert a microSD card into the scanner with metal side facing up.
2. Turn on the scanner by pressing the [Power/Scan] button for 2 seconds.
3. Press the [FORMAT] button with a thin, blunt object, such as the end of a
paperclip to access the button. An “F” will show on the LCD status display
screen.
SD card indicator
Photos will be stored in microSD card
Battery is full
Empty battery
2
Battery indicator
2. Functional parts
3
4
5
Effect indicator
Color or Mono
Counting indicator
Selected resolution
Show scanned files in microSD card
High:600 dpi / Low:300 dpi
4. Press the [SCAN] button once to begin formatting the microSD card.
5. The microSD card indicator will blink until the formatting process is complete.
4. LED light indications
5.4 Time and Date setting
1. Press [TIME SET] button once to enter time setting mode by using a thin, blunt
object, such as the end of a paperclip to access the button. The LCD status
display screen will show “1##” (step 1) for the year. “##” is a set of number that
would be changed to correspond to the actual time/date setting. The numbers
1-5 in front of the “##” indicates each step in the settings.
2. Press the [C/BW] or [DPI] button to select the current Year.
3. Press [SCAN] button once to confirm setting.
4. Repeat step 2 and 3 to continue the Time and Date setting process
Part
Function
1
2
Battery door
For 2x AA alkaline batteries
Indicator
Setting
Power On/ Off: Press and hold this key for 2 seconds to
turn power on or off. In power on mode, press this
button to start scan, press this button again to stop
1##
2##
3##
4##
5##
Year
5. Using the scanner
Power/Scan
Month
Date
Hour
5.1 Installing the battery
1. Open the battery door by sliding the battery compartment downwards as
indicated by the arrow in the diagram below.
2. Insert 2x AA alkaline batteries into the battery compartment.
3. Turn on the scanner by pressing the [POWER] button for 2 seconds.
3
4
5
Error LED indicator Over speed: Red LED on
Scan LED
Minute
Ready for scan: Green LED on
indicator
LCD screen
Resolution
Scanning status display
5. After setting the Minute, “5##”, press the [TIME SET] button again to complete
the Time and Date setting.
Select High(600dpi)/Low(300dpi) resolution;
High/Low resolution mode icon will be displayed on
status LCD
6
5.5 Setting the resolution
Press the [DPI] button to select High/Low resolution.
High/Low resolution icon will be displayed on status LCD.
Select Color/Mono scan, Color/Mono mode icon will be
displayed on status LCD
7
C/BW
8
9
Time set
Press this button to enter Time and Date setting mode
Download photo to a computer via USB cable provided.
5.6 Setting the scan mode
Press the [C/BW] button to select Color/Mono mode.
Color/Mono icon will be displayed on status LCD.
USB interface
10 microSD card slot microSD card storage location.
Press this button with a thin, blunt object, such as the
end of a paperclip to format the microSD card.
11 Format button
|