PROFESSIONAL
CORDLESS WINE OPENER
WO50
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
ꢀ3. Use of attachments not recommended or sold by
Waring may cause fire, electrical shock, injury or
damage to the product.
CAUTION: Corkscrew is sharp. Handle carefully. Keep hands
and utensils out of the container while operating to prevent the
possibility of severe personal injury and/or damage to the
product or property.
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All2Manuals Search And Download.
Before you use this product for the first time, please take a
few moments to read these instructions. Keep them for future
reference.
PARTS
1. Rubberized handset
2. Power Up/Down switch
3. Power indicator light
4. Charge indicator light
5. Charging base
6. Foil cutter
7. Power adapter
2
1
4
7
3
CHARGE
POWER
5
Foil Cutter
6
3
OPERATING INSTRUCTIONS
CONNECTION AND USE
We recommend that you charge your electric wine opener for at
least eight hours before using for the first time. Please follow the
instructions for recharging as stated below:
RECHARGING YOUR ElECTRIC WINE OPENER
Plug one end of the adapter cord into the base of the recharging
base and the other end into an electrical outlet. Place the
electric wine opener into the recharging base, making sure
that it is firmly in position and that it is fully engaged with the
recharging connection. A green charge light will flash indicating
that the unit is charging. It will take approximately 6-8 hours
to recharge your electric wine opener. When your electric wine
opener is fully recharged, the green light will stop flashing and
become a solid green light.
Your wine opener can open approximately 80 bottles of wine
on a full charge.
FOIl CUTTER
For your convenience, this unit has a removable foil cutter,
which is stored in the base of the unit.
Before removing the cork, you must re-
move any foil from the bottle (see fig ꢀ).
Attach foil cutter to the top of the wine
bottle. Keep hand on lower part of bottle
and turn foil cutter in twisting motion
to remove foil. Remove foil to expose top
part of cork surface.
(fig ꢀ)
CAUTION: Blade on foil cutter is sharp. Please keep fingers
away from cutter's sharp edges.
TO OPERATE YOUR WINE OPENER
Press the lower part of the switch (indicated
by a down arrow) to remove a cork from the
bottle. Press the upper part of the switch
(indicated by an up arrow) to release a cork
from the mechanism after you have removed
the cork from the bottle (see fig 2).
(fig 2)
Download from Www.Somanuals.com. All4Manuals Search And Download.
ꢀ. Place the wine opener on top of the wine
bottle making sure that it remains as
straight/upright as possible at all times.
If you hold the electric wine opener at an
angle to the bottle it will not remove the
cork properly (see fig. 3).
(fig 3)
2. Hold the wine opener firmly and depress the lower
part of the switch. The corkscrew spiral will turn in
a counterclockwise direction and enter the cork, then
gradually remove it from the bottle. When the electric
wine mechanism has stopped, the cork has been fully
removed from the bottle.
3. Lift the wine opener up and away from
the bottle. To remove the cork, depress
the upper part of the switch. The spiral
will turn in a clockwise direction and
release the cork (see fig 4).
(fig 4)
4. Always return the wine opener to the charging base
when done. This will protect the unit while not in use.
5
©2008 Waring Products
Division of Conair Corporation
150 Milford Road
East Windsor, NJ 08520
Printed in China
WO50 IB
08WR102
IB-8397
|