AEG Cooktop HK854080XB User Manual

User’s Manual  
HK854080XB 30” Electric Cooktop -  
User’s Manual  
2
Contents  
Thank you for choosing one of our high-quality products.  
To ensure optimal and regular performance of your appliance please read this  
instruction manual carefully. It will enable you to navigate all processes perfectly  
and most efficiently. To refer to this manual any time you need to, we recommend  
you to keep it in a safe place. And please pass it to any future owner of the appliance.  
We wish you much joy with your new appliance.  
Contents  
Safety information  
2
3
6
7
Starting the STOP+GO  
Locking / unlocking the control panel  
The child safety device  
OffSound Control (Switching off and on the  
sounds)  
9
9
10  
Installation instructions  
Product description  
Operating instructions  
10  
Helpful hints and tips  
10  
On and Off  
Automatic Switch Off  
The heat setting  
7
7
8
Care and cleaning  
What to do if…  
12  
12  
/ Switching the outer rings on and off  
8
8
9
Environment concerns  
13  
13  
Automatic Heat Up  
Using the Timer  
Packaging material  
Subject to change without notice  
Safety information  
For your safety and correct operation of the appliance, read this manual carefully before  
installation and use. Always keep these instructions with the appliance even if you move  
or sell it. Users must fully know the operation and safety features of the appliance.  
General safety  
WARNING!  
Persons (including children) with reduced physical sensory, mental capabilities or lack of  
experience and knowledge must not use the appliance. They must have supervision or  
instruction for the operation of the appliance by a person responsible for their safety.  
Child safety  
• Only adults can use this appliance. Children must get supervision to make sure that they  
do not play with the appliance.  
• Keep all packaging away from children. There is a risk of suffocation.  
• Keep children away from the appliance when it is on.  
Installation instructions  
3
WARNING!  
Start thechild safety device to prevent small children and pets from an accidentalactivation  
of the appliance.  
Safety during operation  
• Remove all packaging, stickers and layers from the appliance before the first use.  
• Set the cooking zones to "off" after each use.  
• Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they can  
become hot.  
WARNING!  
Fire danger! Overheated fats and oils can ignite very quickly.  
Correct operation  
• Always monitor the appliance during operation.  
• Only use the appliance for domestic cooking tasks!  
• Do not use the appliance as a work or a storage surface.  
• Do not put or keep very flammable liquids and materials, or fusible objects (made of  
plastic or aluminium) on or near the appliance.  
• Be careful when you connect the appliance to the near sockets. Do not let electricity  
bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.  
How to prevent a damage to the appliance  
• If the objects or cookware fall on the glass ceramic, the surface can be damaged.  
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the  
glass ceramic if you move them on the surface.  
• Do not let cookware boil dry to prevent the damage to cookware and glass ceramics.  
• Do not use the cooking zones with empty cookware or without cookware.  
• Do not cover any part of the appliance with aluminium foil.  
WARNING!  
If there is a crack on the surface, disconnect power supply to prevent the electric  
shock.  
Installation instructions  
Before the installation , note down this data from the rating plate:  
• Model description (Modell)................  
• Product number (Prod. Nr.) ............. ....  
• Serial number (Ser. Nr.) ...............  
You find the rating plate of the appliance on its lower casing.  
HK854080X-B  
58 HBD 68 A0  
949 593 246 00  
220-240 V 50-60-Hz  
7,8 kW  
AEG-ELECTROLUX  
4
Installation instructions  
Safety instructions  
WARNING!  
You must read these!  
Make sure that the appliance is not damaged because of transportation. Do not connect a  
damaged appliance. If it is necessary, speak to the supplier.  
Only an authorised service technician can install, connect or repair this appliance. Use only  
original spare parts.  
Only use built-in appliances after you assemble the appliance into correct built-in units  
and work surfaces that align to the standards.  
Do not change the specifications or modify this product. Risk of injury and damage to the  
appliance.  
Fully obey the laws, ordinances, directives and standards in force in the country where you  
use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!  
Keep the minimum distances to other appliances and units!  
Install anti-shock protection, for example install the drawers only with a protective floor  
directly below the appliance!  
Protect the cut surfaces of the worktop against moisture with a correct sealant!  
Seal the appliance to the work top with no space left with a correct sealant!  
Protect the bottom of the appliance from steam and moisture, e.g. from a dishwasher or  
oven!  
Do not install the appliance adjacent to doors and below windows! If not, hot cookware  
can be hit off the hob when you open doors or windows.  
WARNING!  
Risk of injury from electrical current. Carefully obey the instructions for electrical connec-  
tions.  
• The electrical mains terminal is live.  
• Make electrical mains terminal free of voltage.  
• Install correctly to give anti-shock protection.  
• Loose and incorrect plug and socket connections can make the terminal become too hot.  
• A qualified electrician must install the clamping connections correctly.  
• Use a strain relief clamp on cable.  
• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single-phase  
or two-phase connection.  
• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or  
higher). Speak your local Service Force Centre.  
The appliance must have the electrical installation which lets you disconnect the appliance  
from the mains at all poles with a contact opening width of minimum 3 mm.  
You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses  
removed from the holder), earth leakage trips and contactors.  
Installation instructions  
5
Assembly  
min. 500 mm  
min.  
R 5mm  
490+1mm  
50 mm  
600mm  
min.  
50 mm  
750+1mm  
min.  
25 mm  
min.  
20 mm  
min.  
30 mm  
If you use a protection box (additional accessory),  
the protective floor directly below the appliance  
is not necessary.  
6
Product description  
Product description  
Cooking surface layout  
1
2
145  
1 Single cooking zone 1200 W  
2 Triple cooking zone 1050/1950/2700 W  
3 Multi-purpose zone 1400/2200 W  
4 Control panel  
mm  
145/210/270  
265  
mm  
mm  
170  
mm  
120/180  
mm  
5 Double cooking zone 700/1700 W  
5
4
3
Control panel layout  
1
2
3
4
5
6
7
8
13 12  
11  
10  
9
Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which  
functions operate.  
sensor field  
function  
starts and stops the hob  
1
2
3
4
5
6
7
8
9
starts and stops the key lock or child lock  
shows for which zone you set the time  
shows the time in minutes  
cooking zones' indicators of timer  
the timer display  
selects the cooking zone  
increases or decreases the time  
activates automatic heat-up  
/
starts and stops the oval zone  
starts and stops the outer rings  
Operating instructions  
function  
7
sensor field  
a heat setting display  
a control bar  
10  
11  
12  
13  
shows the heat setting  
to set the heat setting  
starts and stops STOP+GO  
starts and stops the outer ring  
Heat setting displays  
Displays show which functions operate  
Display  
Description  
The cooking zone is off  
The cooking zone operates  
Keep Warm  
-
The automatic heat-up function is on  
There is a malfunction  
+ digit  
OptiHeat Control (3 step Residual heat indicator): still cooking / keep  
warm / residual heat  
/
/
Lock/Child safety function is on  
The automatic switch off is on  
OptiHeat Control (3 step Residual heat indicator)  
WARNING!  
/
/
Risk of burns from residual heat!  
OptiHeat Control indicates the level of the residual heat.  
Operating instructions  
On and Off  
Touch for 1 second to start or stop the appliance.  
Automatic Switch Off  
The function stops the hob automatically if:  
• all cooking zones are off  
.
• you do not set the heat setting after you start the hob.  
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.  
The sound operates some time and the hob stops. Remove the object or clean the control  
panel.  
• you do not stop a cooking zone or change the heat setting. After some time the hob  
stops and comes on. See the table.  
8
Operating instructions  
Automatic Switch Off times  
Heat setting  
Stops after  
-
-
-
-
6 hours  
5 hours  
4 hours  
1.5 hours  
The heat setting  
Touch the control bar at the necessary heat  
setting. Change to the left or the right, if it  
is necessary. Do not release before you have  
a correct heat setting. The display shows the  
heat setting.  
A
/
Switching the outer rings on and off  
You can match the effective heating surface to the size of the cookware.  
To switch on the outer ring touch the sensor field . The indicator comes on. For  
/
more outer rings touch the same sensor field again. The next indicator comes on.  
Do the procedure again to switch off the outer ring. The indicator goes out.  
Automatic Heat Up  
12  
11  
10  
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14  
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat  
Up function. This function sets the highest heat setting for some time (see the graphic),  
and then decreases to the necessary heat setting.  
To start the Automatic Heat Up function for a cooking zone:  
1. Touch  
(
comes on in the display).  
2. Immediately touch the necessary heat setting. After 3 seconds comes on in the  
display.  
To stop the function change the heat setting.  
Operating instructions  
9
Using the Timer  
Count Down Timer  
Use the Count Down Timer to set how long the cooking zone operates for one cooking  
session.  
Set the Count Down Timer after the selection of the cooking zone.  
You can set the heat setting before or after you set the timer.  
Selection of the cooking zone: touch again and again until the indicator of a  
necessary cooking zone comes on.  
Starting the Count Down Timer: touch of the timer to set the time (  
-
00 99  
minutes). When the indicator of the cooking zone flashes slower, the time counts down.  
Checking the remaining time: select the cooking zone with . The indicator of the  
cooking zone flashes faster. Display shows the remaining time.  
Changing the Count Down Timer: select the cooking zone with touch or  
Stopping the timer: select the cooking zone with . Touch . The remaining time  
counts backwards to . The indicator of the cooking zone goes out. To switch off You  
.
00  
can also touch and at the same time.  
When the time elapses, the sound operates and  
off.  
flashes. The cooking zone switches  
00  
Stopping the sound: touch  
CountUp Timer (Count up timer)  
Use the CountUp Timer to monitor how long the cooking zone operates.  
Selection of the cooking zone (if more than 1 cooking zone operate): touch  
again and again until the indicator of a necessary cooking zone comes on.  
Starting the CountUp Timer: touch of the timer comes on. When the indicator  
of the cooking zone flashes slower, the time counts up, display switches between and  
time elapsed (minutes)  
Checking the elapsed time: select the cooking zone with . The indicator of the  
cooking zone flashes faster. Display shows the elapsed time.  
Stopping the CountUp Timer: select the cooking zone with and touch or to  
switch off the timer. The indicator of the cooking zone goes out.  
Minute Minder  
You can use the timer as a Minute Minder while cooking zones do not operate. Touch  
. Touch or of the timer to select the time. When the time elapses, the sound operates  
and  
flashes.  
00  
Starting the STOP+GO  
The  
function sets all cooking zones that operate to a keep warm setting.  
does not stop the timer function.  
locks the control bars.  
Touch  
Touch  
to start this function. The indicator comes on.  
to stop this function. The heat setting that you set before comes on.  
Locking / unlocking the control panel  
You can lock the control panel, but not . You can stop the appliance.  
Touch the symbol . The symbol comes on for 4 seconds.  
10 Helpful hints and tips  
The Timer still operates.  
Touch the symbol to switch off this function. The heat setting that you set before comes  
on.  
When you switch off the appliance, you also switch off this function.  
The child safety device  
This function prevents an accidental operation of the hob.  
Starting the child safety device  
• Start the hob with . Do not set the heat settings .  
• Touch for 4 seconds. The symbol comes on.  
• Stop the hob with  
.
Switching off the child safety device  
• Start the hob with . Do not set the heat settings . Touch for 4 seconds. The  
symbol comes on.  
• Stop the hob with  
.
Overriding the child safety device for one cooking session  
• Start the hob with . The symbol comes on.  
• Touch for 4 seconds. Set the heat setting in less than 10 seconds. You can operate  
the hob.  
• When you stop the hob with , the child safety device operates again.  
OffSound Control (Switching off and on the sounds)  
Switching off the sounds  
Switch off the appliance.  
Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes  
on, the appliance is in standard mode. Touch  
,
comes on, the sound is off.  
When the sound is off, you hear only when you touch , Minute Minder or Count Down  
Timer come down or when you cover the control panel.  
Switching on the sounds  
Switch off the appliance.  
Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes  
on, because the sound is off. Touch  
The sound is on.  
,
comes on, the appliance is in standard mode.  
Helpful hints and tips  
Cookware  
• The bottom of the cookware must be as thick and flat as possible.  
• Cookware made of enamelled steel and with aluminium or copper bottoms can cause  
discoloration on glass ceramic surface.  
Helpful hints and tips 11  
Energy saving  
• If possible, always put the lids on the cookware.  
• Put cookware on a cooking zone before you start it.  
• Stop the cooking zones before the end of the cooking time to use residual heat.  
• The bottom of pans and cooking zones must have the same dimension.  
Öko Timer (Eco Timer)  
To save the energy, the heater of the cooking zone switches itself off earlier than count  
down timer signal. The heating time reduction depends on cooking level and cooking time.  
Examples of cooking applications  
The data in the table is for guidance only.  
Heat  
Use to:  
Time  
Hints  
setting  
Keep cooked foods warm  
as re-  
quired  
Cover  
1
1-3  
1-3  
3-5  
Hollandaise sauce, melt: butter, choco- 5-25  
late, gelatine  
Mix occasionally  
min  
Solidify: fluffy omelettes, baked eggs  
10-40  
min  
Cook with a lid on  
Simmer rice and milkbased dishes, heat- 25-50  
Add at least twice as much liquid as  
rice, stir milk dishes part way  
through  
ing up ready-cooked meals  
Steam vegetables, fish, meat  
Steam potatoes  
min  
5-7  
7-9  
7-9  
9-12  
20-45  
min  
Add a few tablespoons of liquid  
20-60  
min  
Use max. ¼ l water for 750 g of po-  
tatoes  
Cook larger quantities of food, stews  
and soups  
60-150 Up to 3 l liquid plus ingredients  
min  
Gentle fry: escalope, veal cordon bleu, as re-  
Turn halfway through  
cutlets, rissoles, sausages, liver, roux,  
eggs, pancakes, doughnuts  
quired  
12-13 Heavy fry, hash browns, loin steaks,  
steaks  
5-15  
min  
Turn halfway through  
14  
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips  
Information on acrylamides  
According to the newest scientific knowledge, if you brown food (specially the one which  
contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at  
the lowest temperatures and do not brown food too much.  
12 Care and cleaning  
Care and cleaning  
Clean the appliance after each use.  
Always use cookware with clean bottom.  
WARNING!  
Sharp objects and abrasive cleaning agents will damage the appliance.  
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.  
Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.  
Removing the dirt:  
1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. Use  
a special glass ceramic scraper. Put the scraper on the glass ceramic surface at an  
acute angle and slide the blade on the surface.  
Stop the appliance and let it cool down before you clean: limescale rings, water  
rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass ceramic  
or stainless steel.  
2. Clean the appliance with a damp cloth and some detergent.  
3.  
At the end rub the appliance dry with a clean cloth.  
What to do if…  
Problem  
Possible cause and remedy  
You cannot start the appliance • Start the appliance again and set the heat setting in 10 sec-  
or operate it.  
onds.  
The child safety device or  
operates  
. Stop child safety  
device or  
and go".  
. See the section “Child safety device” or "Stop  
• You touched 2 or more sensor fields at the same time. Only  
touch one sensor field.  
• There is water or fat stains on the control panel. Clean the  
control panel  
A sound operates when the ap- You covered one or more sensor fields. Uncover the sensor fields.  
pliance is off. Clean the control panel.  
The residual heat indicator does The cooking zone is not hot because it operated only for a short  
not come on.  
time. If the cooking zone must be hot, speak to the after sales  
service.  
You cannot switch on the outer Switch on the inner ring first.  
ring.  
A sound operates and appliance  
starts and stops again. After 5  
seconds one more sound oper-  
ates.  
You covered  
. Uncover the sensor field.  
Environment concerns 13  
Problem  
comes on  
Possible cause and remedy  
The automatic switch off operates. Stop the appliance and start  
it again.  
There is an error in the appliance.  
and number come on.  
Disconnect the appliance from the electrical supply for some  
time. Disconnect thefusefromtheelectrical system ofthehouse.  
Connect again. If  
service.  
comes on again, speak to the after sales  
There is no signal when you  
touch panel keys  
The signals are off.  
Switch on the signals.  
If you tried the above solutions and cannot repair the problem, speak to your dealer or the  
Customer Care Department. Give the data from the rating plate, three-digit-letter code for  
the glass ceramic (it is in the corner of the cooking surface) and an error message that  
comes on.  
If you operated the appliance incorrectly, the servicing by a customer service technician or  
dealer will not be free of charge, even during the warranty period. The instructions about  
the customer service and conditions of guarantee are in the guarantee booklet.  
Environment concerns  
The symbol  
on the product or on its packaging indicates that this product may not be  
treated as household waste. Instead it should be taken to the appropriate collection point  
for the recycling of electrical and electronic equipment. By ensuring this product is disposed  
of correctly, you will help prevent potential negative consequences for the environment  
and human health, which could otherwise be caused by inappropriate waste handling of  
this product. For more detailed information about recycling of this product, please contact  
your local council, your household waste disposal service or the shop where you purchased  
the product.  
Packaging material  
The packaging materials are friendly to the environment and can be recycled. The plastic  
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as  
household waste at the waste disposal facilities in your municipality.  
Q - Warranty  
AEG products are designed and built to the highest standards.  
We expect your appliances to provide many years of trouble free enjoyment.  
In the event of an appliance requiring attention, each appliance is covered by a 2  
year warranty from the date of purchase.  
Refer to warranty policy for complete terms and conditions.  
Coverage is for costs of parts and labor for appliances in capital cities &  
metropolitan areas. We reserve the right to charge directly for handling  
expenses outside the metropolitan region.  
AEG products are supported by a national service support system.  
Call our customer service department for attention.  
Please retain your invoice AEG to quote should you require service  
assistance. This will identify your product for our priority service back-up.  
Please attach your invoice to this manual for easy future reference.  
AEG Canada  
871 Cranberry Court  
Oakville, Ontario L6L 6J7  
Canada  
Tel 905-829.3980  
Fax 905-829.3985  
For Service & Spares:  
EURO-PARTS  
1.800.678.8352  
Important: Please record details of your purchase below and mail or fax to AEG  
-----------------------------------------------------------------------------------------cut along line ------------------------------------------------------------------------------------  
Na  
m
e
:
TEL  
No  
Add  
r
ess:  
C
i
t
y
:
S
ta  
te  
:
Zi  
p
Code:  
Where purchased:  
Purchase  
pu  
d
a
e
t
d
e
:
:
I
te  
m
s
r
c
h
a
s
Ser  
i
a
l
No. (s):  
33  

Hitachi C1459FN User Manual
Fujitsu Siemens Computers Fujitsu Siemens Business Line 21P4 User Manual
Cypress FLEx36 CYD01S36V User Manual
Curtis LCD1911 User Manual
Compaq Computer Monitor 4300 User Manual
Black Box LH1500A SC R3 User Manual
Audiovox VOD1022 User Manual
Asus Computer Monitor MK221 User Manual
Asus Computer Hardware P4S533 E User Manual
Apple Cinema Display User Manual