Black Box Computer Hardware KVT165A User Manual

July 2010  
KVT163A  
KVT164A  
KVT165A  
KVT160A-R2  
KVT161A  
KVT162A  
ServView IV  
Control your Sun® CPU and servers.  
The ServView IV KVM console is the easiest and most efficient way for you to  
control your Sun® CPUs and servers. This rackmountable workstation comes in a  
1U or 2U clamshell version and includes a high resolution 17" or 19" TFT/LCD  
monitor, a keyboard, and a glidepoint touchpad. Its neat, compact, and takes  
up much less space than a standard keyboard, monitor, and mouse. You can  
mount the ServView IV at any comfortable working height in a standard 19”  
rack. When mounted in a rack, the front panel folds down to conceal the unit.  
When you need to access your SUN servers, slide it out; when you’re done,  
push it in.  
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)  
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax  
724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,  
Customer  
Support  
Information  
PA 15055-1018  
ServView IV  
(Only the specifications, descriptions, and instructions for the ServView product  
code listed for your ServView IV model on the front of this sheet will apply.)  
Ten 10/32” rackmounting screws and cage nuts. (Eight are required for  
assembly, two are extra.)  
NOTE: The components that come with your ServView IV might vary and are  
subject to change without notice.  
To mount the ServView IV in a 19” rack, take these steps:  
1. Mount your CPU(s) and SUN servers in the rack where your ServView IV will  
be installed.  
2. Remove the backing plate thats attached to the rear of the ServView IV by a  
pair of screws.  
3. Unscrew the retention screws that hold the KVM tray shut against the front  
of the ServView IV.  
CAUTION: We recommend that two people work together to perform step 4.  
4. Tilt the ServView IV far enough sideways to get past the Cabinets rails, then  
maneuver it through the Cabinet until its front and rear “mounting ears”  
are even with the Cabinets front and rear rails. Straighten the ServView IV  
back to level so that its front ears are flush against the front of the Cabinets  
front rails and its rear ears are flush against the back of the Cabinets rear  
rails. Align the upper and lower holes in the mounting ears (two in each ear  
—eight all together—not including the middle hole in the front ears thats  
designed for the retention screws) with an appropriate set of holes in the  
Cabinets rails, then secure the ServView IV to the rails using the included  
screws.  
5. Locate the keyboard, mouse, and video cables that come out of the back  
of the ServView IV tray. Attach the connectors of these cables to the  
matching connectors on your Sun server, computer CPU, or (if your ServView  
IV includes an integrated ServSwitch) on the included User Cable that you’ll  
then plug into one of the ServSwitchs user ports.  
6. Models with an integrated ServSwitch only: Plug the User Cable into one of  
the ServSwitchs user ports. Follow the directions in the ServSwitch manual  
for attaching CPUs to the switch. Run the included power cord from the  
ServSwitchs power inlet to a working AC outlet.  
7. Run the included power cord from the ServView IVs power inlet to a working  
AC outlet. Turn on the ServView IV. Refer to the manual for the ServView IVs  
components for information about configuring and operating them. (Note:  
power must be first applied to the ServSwitch, then the CPUs)  
8. Plug in and power up the CPU(s) attached to your ServView IV.  
Page 3  
Trademarks Used in this Manual  
Black Box and the Double Diamond logo are registered trademarks of BB  
Technologies, Inc.  
Sun is a registered trademark of Sun Microsystems.  
Any other trademarks mentioned in this manual are acknowledged to be the  
property of the trademark owners.  
© Copyright 2010. All rights reserved.  
FREE, live, 24/7 Tech Support is just 20 seconds away.  
724-746-5500 | blackbox.com  

HP Hewlett Packard L717g User Manual
HP Hewlett Packard Compaq WF1907 User Manual
GE 00019716 User Manual
Epson DM D210 User Manual
Dell Monitor 860 10161 User Manual
Dell Computer Monitor E2210C User Manual
Asus P4T E User Manual
ASA Electronics JE1029BMK User Manual
Analog Devices ADSP 21020 User Manual
Acer AL 1911 User Manual