FlexWave™ MMX 7000
Compact WiMAX Base Station
The FlexWave™ MMX 7000 is a member of the FlexWave MMX family, a line of mobile WiMAX
broadband wireless access systems based on the 802.16e mobile standard, WiMAX forum Wave2
(MIMO) certification.
The MMX 7000 compact base station is an ideal, cost-effective solution for wireless access services
designed for point-to-multipoint broadband wireless access for mobile and fixed applications in
various conditions and locations. The MMX 7000 is a full outdoor base station, designed for
simple installation and mounting on poles, street lamps or walls.
The FlexWave MMX 7000 is a one-sector station that supports up to 1000 subscriber units. By
adding switch routing units, the system can be extended to as many sectors as required and can
support additional subscribers and bandwidth.
The FlexWave base station provides all the functionality necessary to communicate with fixed and
mobile subscriber units according to the service criteria and customer Service Level Agreements
(SLAs). It also supports the necessary end-to-end Quality of Service (QoS) by connecting to the
service provider’s network backbone.
The FlexWave system uses OFDMA radio technology, which is robust in adverse channel conditions
and enables Non-Line-Of-Sight (NLOS) operation. This allows for improved coverage, while
maintaining a high level of spectral efficiency. Modulation and coding are continuously adapted
to prevailing link conditions, ensuring an optimal balance between robustness and efficiency. The
use of STC/MRC and MIMO radio technologies optimize link performance to ensure maximum
bandwidth and service coverage.
The MMX 7000 is supported by the FlexWave NMS management system.
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
FlexWave™ MMX 7000
Compact WiMAX Base Station
Specifications
Radio and ModeM
Frequency:
MMX 7113-24: 1350 to 1400 MHz
MMX 7114-24: 1400 to 1525 MHz
MMX 7125-24: 2496 to 2690 MHz
MMX 7135-24: 2496 to 2690 MHz
MMX 7137-24: 3600 to 3800 MHz
IEEE802.16-2005 (16e OFDMA)
WiMAX Forum Wave 2 Profile
TDD
3.5Mhz, 5 MHz, 7MHz, 10 MHz
0.25 MHz
Integral Omni External Sector
2
Radio access Method:
Compatibility:
operation Mode:
Channel Bandwidth:
Frequency Resolution:
antennas:
number of antennas default antenna:
default antenna:
antennas Connectors:
diversity Support:
output Power per Sector[P1dB]:
output Power (average):
FFT/Modulation:
Omni
2x N-Type, 50 Ohm, lightning protected STC-MIMO
2 x 10W; 2 x 45W; 2 x 90W
Type 10W: 30 dBm +/-1dB maximum
Type 45W: 36 dBm +/-1dB maximum
512/1024 FFT points; QPSK, 16QAM, 64QAM
Convolution Code and Turbo Code
15dB
FeC:
TPC:
Synchronization:
GPS or IEEE1588 (optional)
neTwoRk inTeRFaCeS
network:
40.5-60VDC 10/100BaseT Half/Full Duplex IEEE 802.3 CSMA/CD
Fiber Optic - optional
aSn Gw Compatibility:
WiMAX Forum R6 Profile C Compatible with CISCO ASN-GW
ConFiGuRaTion and ManaGeMenT
Management:
SNMP
SnMP agent:
SNMP ver 2 client: MIB II (RFC 1213) Private Wi-Max MIBs
Software upgrade:
Remote Configuration:
FTP
FTP
MeChaniCal
dimensions [hxwxd]:
weight:
60cm x 27cm x 10cm/23.6" x 10.6" x 4"
<15Kg / 33 lbs
PoweR inTeRFaCe
input:
48VDC
Power Consumption:
Type 10W: 75Watt maximum Type 45W: 140Watt maximum
enviRonMenTal
operating Temperature:
operating humidity:
-40°C to +55°C
5%-95% non condensing, weather protected
STandaRdS CoMPlianCe
eMC:
Safety:
FCC Part 15, Subpart B, Class A ETSI EN 301489-1/4
TUV-UL 60950-1 IEC 60950-1
ETS 300 019:
environmental:
Part 2-1 T 1.2 & Part 2-2 T 2.3
Part 2-4 T 4.1E
IP66
immunity:
Radio:
EN61000-4-2
EN61000-4-4
EN61000-4-5
FCC Part 27 ETSI EN302 326
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
106979ae 9/08 original
©
2008 adC Telecommunications, inc. all Rights Reserved
|