AEG Dishwasher 88009 User Manual

DISHWASHER  
USER MANUAL  
FAVORIT 88009  
 
ENGLISH  
3
FOR PERFECT RESULTS  
Thank you for choosing this AEG product. We have created it to give you  
impeccable performance for many years, with innovative technologies that help  
make life simpler – features you might not find on ordinary appliances. Please spend  
a few minutes reading to get the very best from it.  
ACCESSORIES AND CONSUMABLES  
In the AEG webshop, you’ll find everything you need to keep all your AEG  
appliances looking spotless and working perfectly. Along with a wide range of  
accessories designed and built to the high quality standards you would expect, from  
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…  
Visit the webshop at:  
CUSTOMER CARE AND SERVICE  
We recommend the use of original spare parts.  
When contacting Service, ensure that you have the following data available.  
The information can be found on the rating plate.  
Model  
PNC  
Serial Number  
 
4
SAFETY INFORMATION  
Before the installation and use of the  
appliance, carefully read the supplied  
instructions. The manufacturer is not re-  
sponsible if an incorrect installation and  
use causes injuries and damages. Al-  
ways keep the instructions with the ap-  
pliance for future reference.  
Water connection  
• Make sure not to cause damage to  
the water hoses.  
• Before you connect the appliance to  
new pipes or pipes not used for a  
long time, let the water flow until it is  
clean.  
• The first time you use the appliance,  
make sure that there is no leakage.  
CHILDREN AND VULNERABLE  
PEOPLE SAFETY  
WARNING!  
Risk of suffocation, injury or per-  
manent disability.  
• Do not let persons, children inclu-  
ded, with reduced physical sensory,  
reduced mental functions or lack of  
experience and knowledge use the  
appliance. They must have supervi-  
sion or instruction for the operation  
of the appliance by a person who is  
responsible for their safety. Do not  
let children play with the appliance.  
WARNING!  
Dangerous voltage.  
The water inlet hose has a safety  
valve and a sheath with an inner  
mains cable.  
• If the water inlet hose is damaged,  
immediately disconnect the mains  
plug from the mains socket. Contact  
Service to replace the water inlet  
hose.  
• Keep all packaging away from chil-  
dren.  
• Keep all detergents away from chil-  
dren.  
• Keep children and pets away from  
the appliance door when it is open.  
INSTALLATION  
WARNING!  
Electrical connection  
This appliance must be installed  
by a qualified or competent per-  
son.  
WARNING!  
Risk of fire and electrical shock.  
• The appliance must be earthed.  
• Remove all the packaging.  
• Make sure that the electrical informa-  
tion on the rating plate agrees with  
the power supply. If not, contact an  
electrician.  
• Always use a correctly installed  
shockproof socket.  
• Do not use multi-plug adapters and  
extension cables.  
• Make sure not to cause damage to  
the mains plug and to the mains ca-  
• Do not install or use a damaged ap-  
pliance.  
• Do not install or use the appliance  
where the temperature is less than 0  
°C.  
• Obey the installation instruction sup-  
plied with the appliance.  
• Make sure that the appliance is in-  
stalled below and adjacent to safe  
structures.  
 
ENGLISH  
5
ble. Contact Service or an electrician  
to change a damaged mains cable.  
• Do not drink and play with the water  
in the appliance.  
• Connect the mains plug to the mains  
socket only at the end of the installa-  
tion. Make sure that there is access  
to the mains plug after the installa-  
tion.  
• Do not pull the mains cable to dis-  
connect the appliance. Always pull  
the mains plug.  
• Do not remove the dishes from the  
appliance until the programme is  
completed. There can be detergent  
on the dishes.  
WARNING!  
Risk of electrical shock, fire or  
burns.  
• Do not put flammable products or  
items that are wet with flammable  
products in, near or on the appliance.  
• Do not use water spray and steam to  
clean the appliance.  
USE  
WARNING!  
Risk of injury.  
• The appliance can release hot steam  
if you open the door while a pro-  
gramme operates.  
• Use this appliance in a household en-  
vironment.  
• Do not change the specification of  
this appliance.  
• Put knives and cutlery with sharp  
points in the cutlery basket with the  
points down or in a horizontal posi-  
tion.  
DISPOSAL  
WARNING!  
Risk of injury or suffocation.  
• Do not keep the appliance door  
open without supervision to prevent  
to fall on it.  
• Disconnect the appliance from the  
mains supply.  
• Cut off the mains cable and dispose  
of it.  
• Do not sit or stand on the open door.  
• Dishwasher detergents are danger-  
ous. Obey the safety instructions on  
the detergent packaging.  
• Remove the door catch to prevent  
children and pets to get closed in the  
appliance.  
 
6
PRODUCT DESCRIPTION  
1
3
2
12  
11  
9
8
7
6
5
4
10  
Top spray arm  
Water hardness dial  
Rinse aid dispenser  
Detergent dispenser  
Cutlery basket  
1
2
3
4
5
6
7
8
9
Upper spray arm  
Lower spray arm  
Filters  
10  
11  
12  
Rating plate  
Salt container  
Lower basket  
Upper basket  
 
ENGLISH  
7
CONTROL PANEL  
1
2
4
3
A
B
C
5
6
9
8
7
On/off button  
Delay touchpad  
Start touchpad  
Indicators  
1
2
3
4
5
6
7
8
9
Programme guide  
Program touchpad  
Programme indicators  
Display  
Option touchpad  
Indicators  
Description  
Multitab indicator.  
ÖKO PLUS indicator.  
ExtraHygiene indicator.  
Washing phase indicator.  
Rinsing phase indicator.  
Drying phase indicator.  
End indicator.  
Rinse aid indicator. This indicator is off while the  
programme operates.  
Salt indicator. This indicator is off while the pro-  
gramme operates.  
Delay indicator.  
Door indicator. It comes on when the door is not  
closed.  
 
8
PROGRAMMES  
Programme  
Type of soil  
Type of load  
Programme phases  
Options  
1)  
All  
Prewash  
ExtraHygiene  
ÖKO PLUS  
Crockery, cutlery,  
pots and pans  
Wash 45 °C or 70 °C  
Rinses  
Dry  
2)  
Heavy soil  
Crockery, cutlery,  
pots and pans  
Prewash  
Wash 70 °C  
Rinses  
ÖKO PLUS  
Dry  
3)  
Normal soil  
Crockery and cut-  
lery  
Prewash  
Wash 50 °C  
Rinses  
Dry  
4)  
Fresh soil  
Crockery and cut-  
lery  
Wash 60 °C  
Rinse  
ExtraHygiene  
5)  
Normal soil  
Crockery and cut-  
lery  
Prewash  
Wash 50 °C  
Rinses  
ExtraHygiene  
ÖKO PLUS  
Dry  
Light soil  
Crockery and cut-  
lery  
Wash 50 °C  
Rinses  
ExtraHygiene  
ÖKO PLUS  
Mixed soil  
Crockery, cutlery,  
pots and pans  
Prewash  
Wash 70 °C  
Rinses  
6)  
Dry  
Normal or light soil Wash 45 °C  
ÖKO PLUS  
Delicate crockery  
and glassware  
Rinses  
Dry  
1)  
The appliance senses the type of soil and the quantity of items in the baskets. It  
automatically adjusts the temperature and quantity of the water, the energy consumption  
and the programme duration.  
2)  
3)  
This programme includes the ExtraHygiene option.  
This is the most silent washing programme. The pump works at a very low speed to  
decrease the level of noise. Because of the low speed, the programme duration is long.  
4)  
5)  
With this programme you can wash a load with fresh soil. It gives good washing results in a  
short time.  
This is the standard programme for test institutes. With this programme you have the most  
efficient use of water and energy consumption for crockery and cutlery with normal soil.  
Refer to the supplied leaflet for test information.  
6)  
With this programme you can wash a load with mixed soil. Very heavy soil in the lower  
basket and normal soil in the upper basket. The water pressure and the water temperature  
in the lower basket are higher than in the upper basket.  
 
ENGLISH  
9
Consumption values  
1)  
Energy (kWh)  
0.9 - 1.7  
1.4 - 1.6  
1.1 - 1.2  
0.8  
Water (l)  
8 - 15  
13 - 14  
9 - 11  
9
Programme  
0.9 - 1.0  
1.0 - 1.1  
1.3 - 1.5  
9 - 11  
10 - 11  
14 - 15  
0.8 - 0.9  
11 - 12  
1)  
The display shows the programme duration.  
The water pressure and temperature, the variations of the mains supply, the options and  
the quantity of dishes can change the programme duration and the consumption values.  
 
10  
OPTIONS  
MULTITAB FUNCTION  
Press  
Option  
touch-  
pad  
Activate this function only when you  
use the combi detergent tablets.  
This function deactivates the flow of  
rinse aid and salt. The related indicators  
are off.  
1 time  
on  
off  
on  
on  
off  
off  
off  
off  
off  
off  
on  
on  
off  
2 times off  
3 times on  
4 times off  
5 times on  
6 times off  
The programme duration can increase.  
ÖKO PLUS  
This function decreases the tempera-  
ture in the drying phase. The energy  
consumption decreases by 25%.  
The dishes can be wet at the end of the  
programme. We recommend that you  
keep the door ajar and let the dishes  
dry.  
If you stop to use the combi  
detergent tablets, before you start  
to use separately detergent, rinse aid  
and dishwasher salt, do these steps:  
1. Deactivate the multitab function.  
EXTRAHYGIENE  
2. Adjust the water softener to the  
highest level.  
This function gives better results for the  
hygiene. During the rinsing phase, the  
temperature stays at 70 °C for 10 to 14  
minutes.  
3. Make sure that the salt container  
and the rinse aid dispenser are full.  
4. Start the shortest programme with a  
rinsing phase, without detergent  
and without dishes.  
ACTIVATING THE OPTIONS  
5. Adjust the water softener to the wa-  
• Activate or deactivate the options  
before the start of a programme. You  
cannot activate or deactivate the op-  
tions while a programme operates.  
ter hardness in your area.  
6. Adjust the released quantity of rinse  
aid.  
• It is not possible to activate the Ex-  
traHygiene function and the ÖKO  
PLUS function together.  
 
ENGLISH  
11  
BEFORE FIRST USE  
1. Make sure that the set level of the  
ADJUSTING THE WATER  
SOFTENER  
water softener agrees with the water  
hardness in your area. If not, adjust  
the water softener. Contact your lo-  
cal water authority to know the wa-  
ter hardness in your area.  
Hard water contains a high quantity of  
minerals that can cause damage to the  
appliance and bad washing results. The  
water softener neutralises these miner-  
als.  
The dishwasher salt keeps the water  
softener clean and in good conditions.  
Refer to the table to adjust the water  
softener to the right level. It makes sure  
that the water softener uses the correct  
quantity of dishwasher salt and water.  
2. Fill the salt container.  
3. Fill the rinse aid dispenser.  
4. Open the water tap.  
5. Processing residues can stay in the  
appliance. Start a programme to re-  
move them. Do not use detergent  
and do not load the baskets.  
If you use the combi detergent  
tablets, activate the multitab  
function. These tablets contain  
detergent, rinse aid and other  
added agents. Be sure that  
these tablets are applicable to  
the water hardness in your area.  
Refer to the instructions on the  
packaging of the products.  
You must adjust the water soft-  
ener manually and electronical-  
ly.  
Water softener  
adjustment  
Water hardness  
German  
degrees  
(°dH)  
French  
degrees  
(°fH)  
mmol/l  
Clarke  
degrees  
Manual  
Elec-  
tronic  
1)  
2
51 - 70  
43 - 50  
37 - 42  
29 - 36  
23 - 28  
19 - 22  
91 - 125  
76 - 90  
65 - 75  
51 - 64  
40 - 50  
33 - 39  
9.1 - 12.5  
7.6 - 9.0  
6.5 - 7.5  
5.1 - 6.4  
4.0 - 5.0  
3.3 - 3.9  
64 - 88  
53 - 63  
46 - 52  
36 - 45  
28 - 35  
23 - 27  
10  
9
1)  
2
1)  
2
8
1)  
2
7
1)  
2
6
1)  
2
1)  
5
15 - 18  
11 - 14  
4 - 10  
< 4  
26 - 32  
19 - 25  
7 - 18  
< 7  
2.6 - 3.2  
1.9 - 2.5  
0.7 - 1.8  
< 0.7  
18 - 22  
13 - 17  
5 - 12  
< 5  
1
1
1
4
3
2
2)  
1
2)  
1
1)  
2)  
Factory position.  
Do not use salt at this level.  
 
12  
Manual adjustment  
Turn the water hardness dial to the po-  
sition 1 or 2.  
• The indicators (B) and (C) go off.  
• The indicator (A) continues to  
flash.  
• The display shows the setting of  
the water softener. Example:  
= level 5.  
Electronic adjustment  
1. Press the on/off button to activate  
the appliance.  
2. Make sure that the appliance is in  
setting mode. Refer to ‘SETTING  
AND STARTING A PROGRAMME’.  
3. Press and hold Delay and Start at  
the same time until the indicators  
(A), (B) and (C) flash.  
5. Press Program again and again to  
change the setting.  
6. Deactivate the appliance to confirm.  
4. Press Program.  
FILLING THE SALT CONTAINER  
CAUTION!  
Only use dishwasher salt. Other  
products can cause damage to  
the appliance.  
Water and salt can come out  
from the salt container when  
you fill it. Risk of corrosion. To  
prevent it, after you fill the salt  
container, start a programme.  
1. Turn the cap counterclockwise and  
open the salt container.  
2. Put 1 litre of water in the salt con-  
tainer (only for the first time).  
3. Fill the salt container with dish-  
washer salt.  
4. Remove the salt around the open-  
ing of the salt container.  
5. Turn the cap clockwise to close the  
salt container.  
 
ENGLISH  
13  
FILLING THE RINSE AID DISPENSER  
CAUTION!  
A
B
Only use rinse aid for dishwash-  
ers. Other products can cause  
damage to the appliance.  
A
The rinse aid, during the last  
rinsing phase, helps to dry the  
dishes without streaks and  
stains.  
+
-
C
D
1. Press the release button (D) to  
open the lid (C).  
2. Fill the rinse aid dispenser (A), no  
more than the mark 'max'.  
3. Remove the spilled rinse aid with  
an absorbent cloth to prevent too  
much foam.  
4. Close the lid. Make sure that the  
release button locks into position.  
You can turn the selector of the  
released quantity (B) between  
position 1 (lowest quantity) and  
position 4 (highest quantity).  
 
14  
DAILY USE  
1. Open the water tap.  
• Do not put in the appliance items  
that can absorb water (sponges,  
household cloths).  
• Remove remaining food from the  
items.  
• Make soft the remaining burned food  
on the items.  
• Put hollow items (cups, glasses and  
pans) with the opening down.  
2. Press the on/off button to activate  
the appliance. Make sure that the  
appliance is in setting mode. Refer  
to ’SETTING AND STARTING A  
PROGRAMME’.  
• If the salt indicator is on, fill the  
salt container.  
• If the rinse aid indicator is on, fill  
the rinse aid dispenser.  
• Make sure that cutlery and dishes do  
not bond together. Mix spoons with  
other cutlery.  
3. Load the baskets.  
4. Add the detergent.  
• Make sure that glasses do not touch  
other glasses.  
• Put small items in the cutlery basket.  
5. Set and start the correct pro-  
gramme for the type of load and  
soil.  
• Put light items in the upper basket.  
Make sure that the items do not  
move.  
• Make sure that the spray arms can  
move freely before you start a pro-  
gramme.  
LOADING THE BASKETS  
Refer to the supplied leaflet with  
examples of the load of the bas-  
kets.  
• Only use the appliance to wash items  
that are dishwasher-safe.  
• Do not put in the appliance items  
made of wood, horn, aluminium,  
pewter and copper.  
 
ENGLISH  
15  
USING THE DETERGENT  
CAUTION!  
Use only detergents for dish-  
washers.  
A
B
1. Press the release button (B) to  
open the lid (C).  
30  
20  
2. Put the detergent in the compart-  
ment (A) .  
3. If the programme has a prewash  
C
phase, put a small quantity of de-  
tergent on the inner part of the ap-  
pliance door.  
4. If you use detergent tablets, put  
the tablet in the compartment (A).  
5. Close the lid. Make sure that the  
release button locks into position.  
Do not use more than the cor-  
rect quantity of detergent. Refer  
to the instructions on the deter-  
gent packaging.  
Detergent tablets do not fully  
dissolve with short programmes  
and detergent residues can stay  
on the dishes.  
We recommend that you use  
detergent tablets with long pro-  
grammes.  
1. Open the water tap.  
SETTING AND STARTING A  
PROGRAMME  
2. Press the on/off button to activate  
the appliance.  
3. Close the appliance door.  
Setting mode  
4. Make sure that the appliance is in  
The appliance must be in setting mode  
to accept some operations.  
The appliance is in setting mode when,  
after the activation:  
• All the programme indicators come  
on.  
• The display shows two horizontal sta-  
tus bars.  
If the control panel shows other condi-  
tions, press and hold Delay and Start  
at the same time until the appliance is  
in setting mode.  
setting mode.  
5. Press Program again and again un-  
til the indicator of the programme  
that you want to set comes on.  
• The programme duration flashes  
in the display.  
• The phase indicators of the set  
programme come on.  
6. If you want, you can set the options.  
7. Press Start. The programme starts.  
• Only the indicator of the phase in  
operation stays on.  
Starting a programme without  
delay start  
 
16  
• The display shows the pro-  
gramme duration that decreases  
with steps of 1 minute.  
Press and hold Delay and Start at the  
same time until:  
• All the programme indicators come  
on.  
Starting a programme with  
delay start  
• The display shows two horizontal sta-  
tus bars.  
Make sure that there is deter-  
gent in the detergent dispenser  
before you start a new pro-  
gramme.  
1. Set the programme and the op-  
tions.  
2. Press Delay again and again until  
the display shows the delay time  
you want to set (from 1 to 24 hours).  
At the end of the programme  
• The delay time flashes in the dis-  
play.  
• The delay indicator is on.  
When the programme is completed,  
the end indicator is on and the display  
shows 0.  
3. Press Start. The countdown starts.  
1. Open the appliance door.  
• The display shows the countdown  
of the delay start that decreases  
with steps of 1 hour.  
2. Press the on/off button to deacti-  
vate the appliance.  
• The phase indicators of the set  
programme go off.  
• When the countdown is completed,  
the programme starts.  
– The indicator of the phase in oper-  
ation comes on.  
3. Close the water tap.  
If you do not press the on/off  
button, the Auto Off device au-  
tomatically deactivates the ap-  
pliance after some minutes. This  
helps to decrease the energy  
consumption.  
Opening the door while the  
appliance operates  
• For better drying results, keep the  
appliance door ajar for some mi-  
nutes.  
• Let the dishes become cold before  
you remove them from the appli-  
ance. Hot dishes can be easily dam-  
aged.  
If you open the door, the appliance  
stops. When you close the door, the  
appliance continues from the point of  
interruption.  
Cancelling the delay start while  
the countdown operates  
• First remove the items from the lower  
basket, then from the upper basket.  
There can be water on the sides  
and on the door of the appli-  
ance. Stainless steel becomes  
cool more quickly than the  
dishes.  
Press Delay again and again until:  
• The display shows the programme  
duration.  
• The phase indicators come on.  
• The programme starts.  
Cancelling the programme  
 
ENGLISH  
17  
CARE AND CLEANING  
WARNING!  
Dirty filters and clogged spray  
arms decrease the washing re-  
sults.  
Make a check regularly and, if  
necessary, clean them.  
Before maintenance, deactivate the ap-  
pliance and disconnect the mains plug  
from the mains socket.  
CLEANING THE FILTERS  
1. Turn the filter (A) counter-  
C
clockwise and remove it.  
2. To disassemble the filter (A),  
pull apart (A1) and (A2).  
C
3. Remove the filter (B).  
4. Wash the filters with water.  
A
5. Put the filter (B) to its initial  
position. Make sure that it  
assembles correctly under  
the two guides (C).  
B
6. Assemble the filter (A) and  
put it into position in filter  
(B). Turn it clockwise until it  
locks.  
A1  
A2  
An incorrect position of  
the filters can cause bad  
washing results and dam-  
age to the appliance.  
Only use neutral detergents. Do not  
use abrasive products, abrasive clean-  
ing pads or solvents.  
CLEANING THE SPRAY ARMS  
Do not remove the spray arms.  
If the holes in the spray arms are clog-  
ged, remove remaining parts of soil  
with a thin pointed object.  
EXTERNAL CLEANING  
Clean the appliance with a moist soft  
cloth.  
 
18  
TROUBLESHOOTING  
The appliance does not start or it stops  
- The appliance does not drain  
the water.  
during operation.  
First try to find a solution to the prob-  
lem (refer to the table). If not, contact  
Service.  
With some problems, the display  
shows an alarm code:  
- The anti-flood device is on.  
WARNING!  
Deactivate the appliance before  
you make the checks.  
- The appliance does not fill with  
water.  
Problem  
Possible cause  
Possible solution  
The programme  
does not start.  
The mains plug is not con-  
nected in the mains socket.  
Connect the mains plug.  
The appliance door is open. Close the appliance door.  
You did not press Start.  
Press Start.  
The fuse in the fuse box is  
damaged.  
Replace the fuse.  
The delay start is set.  
Cancel the delay start or  
wait for the end of the  
countdown.  
The appliance does The water tap is closed.  
not fill with water.  
Open the water tap.  
The water pressure is too  
low.  
Contact your local water au-  
thority.  
The water tap is clogged or Clean the water tap.  
there is limescale on it.  
The filter in the water inlet  
hose is clogged.  
Clean the filter.  
The water inlet hose has a  
kink or a bend.  
Make sure that the position  
of the hose is correct.  
The anti-flood device is on. Close the water tap and  
There are water leakages in contact Service.  
the appliance.  
The appliance does The sink spigot is clogged.  
not drain the water.  
Clean the sink spigot.  
The water drain hose has a  
kink or a bend.  
Make sure that the position  
of the hose is correct.  
After the checks are completed, acti-  
vate the appliance. The programme  
continues from the point of interrup-  
tion.  
If the problem occurs again, contact  
Service.  
If the display shows other alarm codes,  
contact Service.  
 
ENGLISH  
19  
THE WASHING RESULTS AND DRYING RESULTS ARE NOT  
SATISFACTORY  
Problem  
Possible cause  
Possible solution  
Clean the filters.  
The dishes are not  
clean.  
The filters are clogged.  
The filters are not correctly Make sure that the filters are  
assembled and installed.  
correctly assembled and in-  
stalled.  
The spray arms are clog-  
ged.  
Remove remaining soil with a  
thin pointed object.  
The programme was not  
applicable for the type of  
load and soil.  
Make sure that the pro-  
gramme is applicable for the  
type of load and soil.  
Incorrect position of the  
Make sure that the position  
items in the baskets. Water of the items in the baskets is  
could not wash all items.  
correct and that the water  
can easily wash all items.  
The spray arms could not  
turn freely.  
Make sure that the position  
of the items in the baskets is  
correct and does not cause  
the blockage of the spray  
arms.  
The quantity of detergent  
was not sufficient.  
Make sure that you add the  
correct quantity of detergent  
in the dispenser before you  
start a programme.  
There was no detergent in  
the detergent dispenser.  
Make sure that you add de-  
tergent in the dispenser be-  
fore you start a programme.  
Limescale particles  
on the dishes.  
The salt container is empty. Make sure that there is dish-  
washer salt in the salt con-  
tainer.  
The set level of the water  
softener is incorrect.  
Make sure that the set level  
of the water softener agrees  
with the water hardness in  
your area.  
The cap of the salt contain- Tighten the cap.  
er is loose.  
Whitish streaks and The released quantity of  
Decrease the released quan-  
tity of rinse aid .  
stains or bluish lay-  
ers on glasses and  
dishes.  
rinse aid is too much.  
 
20  
Problem  
Possible cause  
Possible solution  
The quantity of detergent  
was too much.  
Make sure that you add the  
correct quantity of detergent  
in the dispenser before you  
start a programme.  
Dry water drop  
stains on glasses  
and dishes.  
The released quantity of  
Increase the released quanti-  
rinse aid was not sufficient . ty of rinse aid.  
The quality of the detergent Try a different brand of de-  
can be the cause.  
tergent.  
The dishes are wet. • The programme had no  
drying phase.  
For better drying results,  
keep the door ajar for some  
minutes.  
• The programme had a  
low temperature drying  
phase.  
The dishes are wet  
and matt.  
The rinse aid dispenser is  
empty.  
Make sure that there is rinse  
aid in the rinse aid dispenser.  
The quality of the rinse aid  
can be the cause.  
Try a different brand of rinse  
aid.  
The quality of the combi  
detergent tablets can be  
the cause.  
• Try a different brand of  
combi detergent tablets.  
• Activate the rinse aid dis-  
penser and use the rinse  
aid together with the com-  
bi detergent tablets.  
• The indicator (B) continues to  
Activating the rinse aid  
dispenser with the multitab  
function activated  
flash.  
• The display shows the setting of  
the rinse aid dispenser.  
1. Press the on/off button to activate  
Off  
On  
the appliance.  
2. Make sure that the appliance is in  
setting mode. Refer to ‘SETTING  
AND STARTING A PROGRAMME’.  
3. Press and hold Delay and Start at  
the same time until the indicators  
(A), (B) and (C) flash.  
5. Press Option to change the setting.  
6. Deactivate the appliance to confirm.  
7. Adjust the released quantity of rinse  
aid.  
4. Press Option .  
8. Fill the rinse aid dispenser.  
• The indicators (A) and (C) go off.  
TECHNICAL INFORMATION  
Dimensions  
Width / Height / Depth (mm)  
Refer to the rating plate.  
596 / 818 - 878 / 580  
Electrical connection  
Water supply pressure  
Min. / max. (bar / MPa)  
Cold water or hot water  
(0.5 / 0.05 ) / (8 / 0.8 )  
max. 60 °C  
1)  
2)  
Water supply  
 
ENGLISH  
21  
Capacity  
Place settings  
Connect the water inlet hose to a water tap with a 3/4'' thread.  
12  
1)  
2)  
If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian  
energy), use the hot water supply to decrease energy consumption.  
 
22  
 
ENGLISH  
23  
 
117928790-A-212011  
 

3M Projector MP8725 User Manual
Aastra Telecom Telephone 2025 User Manual
Alto Shaam Water System FI 23014 User Manual
Amana Microwave Oven RCS10DA User Manual
Audiovox Remote Starter 128 7828A User Manual
Axor Indoor Furnishings 10101XX1 User Manual
Backyard Storage Solutions Outdoor Storage 16702 User Manual
Bahco Saw Production Cutting Bandsaw User Manual
Baldor Portable Generator IDLC1000 2M User Manual
Behringer Musical Instrument Amplifier BLE400 User Manual