|
WASHING MACHINE
USER MANUAL
L 75270 FL
L 75470 FL
L 75670 FL
ENGLISH
3
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
Visit the webshop at:
VISIT OUR WEBSITE FOR:
- Products
- Brochures
- User manuals
- Trouble shooter
- Service information
4
SAFETY INFORMATION
Before the installation and use, read
this manual carefully:
• For your safety and the safety of your
property
• To help the environment
• For the correct operation of the ap-
pliance.
Always keep these instructions with the
appliance also if you move or give it to
a different person.
GENERAL SAFETY
The manufacturer is not responsible if
an incorrect installation and use causes
damage.
• Do not use the appliance for profes-
sional use. The appliance is only for
domestic use.
• Do not change the specifications of
this appliance. There is the risk of in-
jury and damage to the appliance.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Risk of explosion or fire.
• Obey the safety instructions on the
detergent packaging to prevent
burns to eyes, mouth and throat.
• Make sure that you remove all metal
objects from the laundry. Hard and
sharp material can cause damage to
the appliance.
CHILDREN AND VULNERABLE
PERSON SAFETY
• Do not let persons, children inclu-
ded, with reduced physical sensory,
reduced mental functions or lack of
experience and knowledge use the
appliance. They must have supervi-
sion or instruction for the operation
of the appliance by a person who is
responsible for their safety.
• Keep all packaging away from chil-
dren. There is the risk of suffocation
or injury.
• Keep all detergents away from chil-
dren.
• Do not touch the glass of the door
while a programme operates. The
glass can be hot (only for front-load-
ing appliances).
• Keep children and pets away from
the appliance when the door is open.
• Before you close the appliance door,
make sure that children and pets are
not into the drum.
• If the appliance has a child safety de-
vice, we recommend to activate it.
CARE AND CLEANING
• Deactivate the appliance and discon-
nect the mains plug from the mains
socket.
• Do not use the appliance without the
filters. Make sure that the installation
of the filters is correct. An incorrect
installation causes water leakages.
CHILD SAFETY DEVICE
• When you activate this device, you
cannot close the door. This prevents
children or pets to be closed in the
drum. To activate the device, turn it
clockwise, until the groove is horizon-
tal. To deactivate the device, turn it
counterclockwise, until the groove is
vertical.
INSTALLATION
• The appliance is heavy, be careful
when you move it.
• Do not transport your appliance with-
out the transit bolts, you can damage
ENGLISH
5
internal components and cause leak-
ages or malfunctions.
• Always use a correctly installed
shockproof socket.
• Do not install and connect a dam-
aged appliance.
• Do not use multiple plugs and exten-
sion cables. There is a risk of fire.
• Make sure to remove all packaging
and transport bolts.
• Do not replace or change the mains
cable. Contact the service centre.
• Make sure that the mains plug is dis-
connected from the mains socket
during installation.
• Only a qualified person must do the
electrical installation, the plumbing
and the installation of the appliance.
This to prevent the risks of structural
damage or injury.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• When you install the appliance on a
carpet floor, make sure that there is
air circulation between the appliance
and the carpet. Adjust the feet to
have the necessary space between
the appliance and the carpet.
• Make sure not to cause damage to
the mains plug and cable.
• Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access
to the mains plug after the installa-
tion.
• Do not pull the mains cable to dis-
connect the appliance. Always pull
the mains plug.
• Only for UK and Ireland. The appli-
ance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
• Permanent connection. To connect
the appliance permanently, install a
double-pole isolating switch between
the appliance and the electricity sup-
ply. It must have a minimum distance
of 3 mm between the switch contacts
and it must be the correct type for
the necessary load. It must agree
with the last electrical legislation. The
switch must not break the yellow and
green ground cable.
Water connection
• Do not connect the appliance with
old hoses already used. Only use new
hoses.
• Make sure not to cause damage to
the water hoses.
• Do not connect the appliance to new
pipes or pipes not used for a long
time. Let the water flow for some mi-
nutes, then connect the inlet hose.
Only a qualified electrician must in-
stall this type of device.
• The first time you use the appliance,
make sure that the water hoses and
the couplings do not have leakages.
DISCARD THE APPLIANCE
1. Disconnect the mains plug from the
mains socket.
2. Cut off the mains cable and discard
Electrical connection
it.
• Make sure that the appliance is
earthed.
• Make sure that the electrical informa-
tion on the rating plate agrees with
the power supply.
3. Discard the door catch. This pre-
vents children or pets to be closed
in the appliance. There is a risk of
suffocation (only for front-loading
appliances).
6
ENVIRONMENT CONCERNS
• Always start a washing programme
with the maximum load of laundry.
• If necessary, use a stain remover
when you set a programme with a
low temperature.
• To use the correct quantity of the de-
tergent, check the water hardness of
your domestic system
PACKAGING MATERIALS
Recycle the materials with the symbol
.
Put the packaging in applicable con-
tainers to recycle it.
ECOLOGICAL HINTS
To help the environment, use less water
and energy, obey these instructions:
• Set a programme without the pre-
wash phase to wash laundry with nor-
mal soil.
IN THE INTEREST OF THE ENVIRONMENT
• Connect the appliance to the FOUL
system for the drain water. The sew-
age works keeps the drain water for
the treatment before to release safely
it into a river. Do not connect this ap-
pliance to the surface drain system of
the water because it releases the
drain water directly into a river or
stream without a treatment and this
can cause of pollution. Contact your
local water authority to have more in-
formation.
consequences for the environment and
human health, which could otherwise
be caused by inappropriate waste
handling of this product. For more
detailed information about recycling of
this product, please contact your local
council, your household waste disposal
service or the shop where you
The symbol
on the product or on its
packaging indicates that this product
may not be treated as household
waste. Instead it should be taken to the
appropriate collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative
purchased the product.
ENGLISH
7
TECHNICAL INFORMATION
Dimensions
Width / Height / Depth
605 / 850 / 605 mm
640 mm
Total depth
Electrical connection:
Voltage
230-240 V
2200 W
10 A
Overall power
Fuse
Frequency
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
IPX4
Water supply pressure
Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Cold water
1)
Water supply
Maximum load
Spin speed
Cotton
7 kg
Maximum
1200 rpm (L 75270 FL)
1400 rpm (L 75470 FL)
1600 rpm (L 75670 FL)
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
8
PRODUCT DESCRIPTION
1
2
3
8
9
10
4
5
11
12
6
7
Worktop
Feet for the appliance level
Water drain hose
Water inlet valve
1
2
3
4
5
6
7
8
Detergent dispenser
Control panel
Door handle
9
Mains cable
10
11
12
Rating plate
Transit bolts
Drain pump
Feet for the appliance level
ACCESSORIES
Spanner
To remove the transit bolts.
Plastic caps
1
2
1
2
To close the holes on the rear side
of the cabinet after the removal of
the transit bolts.
Anti-flood inlet hose
To prevent possible leakage
Plastic hose guide
3
4
4
3
To connect the drain hose on the
edge of a sink.
ENGLISH
9
CONTROL PANEL
1
2
3
Economy
Super Eco
20 Min. - 3 kg
Quick Intensive
Jeans
Cottons
+ Prewash
Extra Silent
Synthetics
+ Prewash
Easy Iron
Delicates
Wool/Silk
Curtains
Rinse
Spin/Drain
Temp.
On/Off
10
9
8
7
6
5
4
On/Off button
Programme knob
Display
Time saving button
Extra rinse button
Stain button
1
2
3
4
5
6
7
8
9
Start Pause button
Delay start button
Spin reduction button
Temperature button
10
1
Press button
ance again.
to activate the appli-
1
ON/OFF BUTTON
Press this button to activate or deacti-
vate the appliance. A tune sounds when
the appliance is activated.
The AUTO OFF function automatically
deactivates the appliance to decrease
energy consumption when:
• After 5 minutes from the end of the
washing programme. Refer to 'At the
end of programme'.
2
PROGRAMME KNOB
•
4
Before press button
, you do not
Turn this knob to set a programme. The
related programme indicator comes on.
use the appliance for five minutes.
3
DISPLAY
A
B
C
D
The display shows:
A
B
• The maximum temperature of the programme.
• The default spin speed of the programme.
1)
•
'No Spin' and 'Rinse Hold' symbols.
10
2)
C
•
The display symbols.
Symbols
Description
Washing phase
Rinse phases
Spin phase
Child lock
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
Delay start
D
• The programme time
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay start
time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
4
The indicator of the Start/Pause button
flashes.
•
When the programme is completed.
1)
2)
Only available for Spin/Drain programme.
The symbols appear on the display when the related phase or function is set.
4
6
START/PAUSE BUTTON
TIME SAVE BUTTON
4
6
Press button
programme.
to start or interrupt a
Press the button
to decrease the
programme duration.
• Press one time to set 'Shortened du-
ration' for items with daily soil.
• Press two times to set 'Extra Quick'
for items with almost no soil.
5
DELAY START BUTTON
5
Press button
to delay the start of a
programme from 30 minutes to 20
hours.
Some programmes accept only
one of the two functions.
ENGLISH
11
7
ACOUSTIC SIGNALS
FUNCTION
EXTRA RINSE BUTTON
7
Press button
to add rinsing phases
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
8
STAIN BUTTON
8
Press button
to add the stain phase
8
7
to a programme.
signals, press button
and button
Use this function for laundry with hard
stains to remove.
When you set this function, put the
at the same time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
only when you press the buttons
and when a malfunction occurs.
stain remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, press button
9
SPIN BUTTON
10
9
and button
at the same time
Press this button to:
until the display shows the symbol
.
• To deactivate the function, press but-
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
10
9
ton
and button
at the same
goes off.
time until the symbol
You can activate the function:
The display shows only the spin
speeds available with the set
programme.
• Before you press the Start/Pause but-
4
• Deactivate the spin phase.
ton
: the appliance cannot start.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
• After you press the Start/Pause but-
4
ton
, all the buttons and the pro-
gramme knob are deactivated.
PERMANENT EXTRA RINSE
FUNCTION
Spin phase is off.
With this function you can keep the ex-
tra rinse function permanently on when
you set a new programme.
'Rinse Hold' function is
on.
• To activate the function press button
10
TEMPERATURE BUTTON
6
5
and button
until the indicator of button
• To deactivate the function press but-
at the same time
7
is on.
10
Press button
temperature.
to change the default
6
5
ton
and button
at the same
- -
= cold water
7
time until the indicator of button
is off.
12
PROGRAMMES
Programme
Temperature
Type of load
Cycle
Functions
max. weight of load description
Cottons
95° - Cold
White and coloured Wash
SPIN REDUCTION
RINSE HOLD
STAIN
cotton with normal
soil.
Rinses
Long spin
max. 7 kg
EXTRA RINSE
1)
TIME SAVE
Cottons + pre-
wash
95° - Cold
White and coloured Prewash
SPIN REDUCTION
RINSE HOLD
STAIN
cotton with heavy
soil.
Wash
Rinses
Long spin
max. 7 kg
EXTRA RINSE
1)
TIME SAVE
Extra Silent
95° - Cold
White and coloured Stop with water in STAIN
cotton with normal
soil.
the drum
Rinses
Long spin
EXTRA RINSE
1)
TIME SAVE
max. 7 kg
Synthetics
60° - Cold
Synthetic or mixed
Wash
SPIN REDUCTION
RINSE HOLD
STAIN
fabric items with nor- Rinses
mal level of soil.
max. 4 kg
Short spin
EXTRA RINSE
1)
TIME SAVE
Synthetics + pre- Synthetic or mixed
Prewash
Wash
SPIN REDUCTION
RINSE HOLD
STAIN
wash
fabric items with
heavy soil.
60° - Cold
Rinses
max. 4 kg
Short spin
EXTRA RINSE
1)
TIME SAVE
2)
Synthetic fabric
items with normal
soil.
Wash
RINSE HOLD
EXTRA RINSE
TIME SAVE
Easy Iron
Rinses
60° - Cold
1)
Short spin
max. 4 kg
Delicates
40° - Cold
Delicate fabrics as
Wash
SPIN REDUCTION
RINSE HOLD
STAIN
acrylics, viscose, pol- Rinses
yester items with
normal soil.
max. 4 kg
Short spin
EXTRA RINSE
1)
TIME SAVE
Wool / Silk
40° - Cold
Machine washable
wool. Hand washa-
ble wool and deli-
cate fabrics with
«hand washing» care
symbol.
Wash
SPIN REDUCTION
RINSE HOLD
Rinses
Short spin
max. 2 kg
ENGLISH
13
Programme
Temperature
Type of load
Cycle
Functions
max. weight of load description
3)
All fabrics
Drainage of the
water
SPIN REDUCTION
NO SPIN
Spin / Drain
The maximum load
of the laundry is rela- Spin phase at the
ted to the type of
laundry.
maximum speed.
Rinse
Hand washed items. Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
Curtains
40° - Cold
Set this programme Prewash
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
to wash curtains. It
adds automatically
the prewash phase
to clean the dust
from the curtains.
Do not put the de-
tergent into the pre-
wash compartment.
max. 2 kg
Wash
4)
Rinses
Short spin
Jeans
60° - Cold
All items in jeans.
Jersey made items
with hi-tech materi-
als.
Wash
SPIN REDUCTION
RINSE HOLD
Rinses
Short spin
EXTRA RINSE
1)
TIME SAVE
max. 7 kg
Quick Intensive
60°-40°
Quick washing pro-
Wash
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
gramme, to be used Rinses
for lightly soiled
white/fast coloured
cottons and mixed
fabrics.
Long spin
max. 5 kg
20 min. - 3 kg
40°-30°
Cotton and synthetic Wash
SPIN REDUCTION
items with light soil
or worn only one
time.
Rinses
Short spin
5)
Mixed fabrics (cotton Wash
and synthetic items). Rinses
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
Super Eco
Cold
max. 3 kg
Long spin
Cotton Econo-
my
60° - 40°
White and fast col-
oured cotton with
normal soil.
Wash
SPIN REDUCTION
NO SPIN
RINSE HOLD
STAIN
EXTRA RINSE
6)
Rinses
Long spin
max. 7 kg
1)
if you press the button 6 two times (Super Quick function set), we recommend you to
decrease the quantity of the load. It is possible to keep the full load but the washing results
are not good.
2)
The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds
some rinses.
14
3)
4)
The default phase of the spin speed is related to cotton items. Set the spin speed. Make
sure that it agrees with the laundry.
Set this function to add rinses. With a low spin speed the appliance performs delicate rinses
and a short spin.
5)
6)
Set this programme to decrease the time and the consumption of energy and water.
Set this programme to have a good washing results and decrease the energy consumption.
The time of the washing programme is extended.
CONSUMPTION VALUES
1)
Energy consumption
Water consump-
Programme
2)
2)
(KWh)
tion (litre)
White Cottons 95 °C
Cottons 60 °C
Cottons 40 °C
Synthetics 40 °C
Delicates 40 °C
Wool/ Handwash 30 °C
1)
2.4
1.5
73
69
69
48
58
57
0.90
0.55
0.65
0.35
Refer to the display for the programme time.
2)
The consumption information shown in this chart is indicative. It can vary depending on the
quantity and the type of laundry, on the temperature of the water supply and on the
ambient temperature.
are the most efficient programmes in
Standard programmes for the
Energy Label consumption
values
terms of combined energy and water
consumption for washing that type of
cotton laundry.
They agree with EN60456.
The cotton 60 °C economy and cotton
40 °C economy are the standard cotton
programmes for normally soiled cotton
laundry. They are suitable to clean nor-
mally soiled cotton laundry and they
The actual water temperature
may differ from the declared cy-
cle temperature.
ENGLISH
15
BEFORE FIRST USE
1. To activate the drain system, put 2
detergent dispenser. Set and start
a programme for cotton at the
highest temperature without laun-
dry. This removes all possible dirt
from the drum and the tub.
litre of water in the main wash com-
partment of the detergent dispens-
er.
2. Put a small quantity of detergent in
the main wash compartment of the
USING THE APPLIANCE
1. Open the water tap.
5. Use the correct quantity of deter-
gent and additives.
2. Connect the mains plug to the
mains socket.
6. Set and start the correct pro-
gramme for the type of laundry and
soil.
3.
1
Press button
pliance.
to activate the ap-
4. Put the laundry in the appliance.
LOADING THE LAUNDRY
1. Open the appliance door.
Make sure not to put too much
laundry in the drum.
3. Close the door.
2. Put the laundry in the drum, one
item at a time. Shake the items be-
fore you put them in the appliance.
Make sure that no laundry stays be-
tween the seal and the door. There is a
risk of water leakage or damage to the
laundry.
16
FILLING THE DETERGENT AND ADDITIVES
The detergent compartment for the prewash phase and the soak
programme.
Add the detergent for prewash and soak before the start of the
programme.
The detergent compartment for the washing phase.
If you use a liquid detergent, put it immediately before you start
the programme.
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the pro-
gramme.
This is the maximum level for the quantity of liquid additives.
The compartment for the stain remover.
Put the product in the compartment and set the stain function be-
fore you start the programme.
Flap for powder or liquid detergent
Turn it (up or down) in the correct position to use powder or liquid
detergent.
Always obey the instructions that you find on the packaging of the deter-
gent products.
Check the position of the flap
1. Pull out the detergent dispenser
until it stops.
2. Press the lever down to remove the
dispenser.
ENGLISH
17
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the
flap down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash
phase.
– Do not set the delay start
function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.
SETTING AND STARTING A PROGRAMME
1. Turn the programme knob. The re-
INTERRUPT A PROGRAMME
lated programme indicator comes
on.
1.
4
Press button
flashes.
. The indicator
2.
4
The indicator of button
with red colour.
flashes
2.
4
Press button
again. The wash-
ing programme continues.
3. The display shows the default tem-
perature and spin speed. To
change the temperature and/or the
spin speed, press the related but-
tons.
4. Set the available functions. The in-
dicator of the set function comes
on or the display shows the related
symbol.
CANCEL A PROGRAMME
1.
1
Press button
to cancel the pro-
gramme and to deactivate the ap-
pliance.
2.
1
Press button
again to activate
the appliance. Now, you can set a
new washing programme.
5.
4
Press button
to start the pro-
gramme. The indicator of button
The appliance does not drain
the water.
4
is on.
18
2.
3.
5
Press button
again and again
CHANGE A FUNCTION
until the display shows 0’.
You can change only some functions
before they operate.
4
Press button
starts.
. The programme
1.
4
Press button
flashes.
. The indicator
OPEN THE DOOR
2. Change the function set.
While a programme or the delay start
operates, the appliance door is locked.
SET THE DELAY START
To open the appliance door:
1.
5
Press button
again and again
1.
4
Press button
. The door lock
until the display shows the number
of minutes or hours. The related
symbols comes on.
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
2.
4
Press button
, the appliance
4
button
. The programme or the
starts the countdown of the delay
start.
delay start continues.
When the countdown is comple-
ted, the programme starts auto-
matically.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
4
Before you press button
to
start the appliance, you can can-
cel or change the set of the de-
lay start.
1. Deactivate the appliance.
2. Wait for some minutes.
You cannot set the delay start
with the Steam programme.
3. Make sure that no water is
in the drum.
CANCEL THE DELAY START
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
1.
4
Press button
cator flashes.
. The related indi-
AT THE END OF THE PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
• Keep the door ajar, to prevent mil-
dew and odours.
•
In the display
comes on.
• The indicator of the Start/Pause but-
4
ton
goes off.
• Close the water tap.
• The door lock symbol goes off.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
•
1
Press button
to deactivate the ap-
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appli-
ance again, the display show the
end of the last set programme.
Turn the programme knob to
set a new cycle.
ENGLISH
19
To drain the water:
4. Deactivate the appliance.
The appliance drain and spin
1. If necessary, decrease the spin
speed.
automatically after approximate-
ly 18 hours.
2.
4
Press the Start/Pause button
.
The appliance drain the water and
spin.
3. When the programme is comple-
ted and the door lock symbol goes
off, you can open the door
20
HELPFUL HINTS AND TIPS
THE LAUNDRY LOAD
DETERGENTS AND ADDITIVES
• Divide the laundry in: white, col-
oured, synthetics, delicates and wool.
• Only use detergents and additives
specially made for washing machines.
• Obey the washing instructions that
are on the laundry care labels.
• Do not mix different types of deter-
gents.
• Do not wash together white and col-
oured items.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
• To help the environment, do not use
more than the correct quantity of de-
tergent.
• Obey the instructions that you find
on the on packaging of these prod-
ucts.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Use the correct products for the type
and colour of the fabric, the pro-
gramme temperature and the level of
soil.
• If you use liquid detergents, do not
set the prewash phase.
• If your appliance has not the deter-
gent dispenser with the flap device,
add the liquid detergents with a dos-
ing ball.
• Turn inside out multilayered fabrics,
wool and items with painted illustra-
tions.
• Remove hard stains.
• Wash with a special detergent heavy
soil stains.
• Be careful with the curtains. Remove
the hooks or put the curtains in a
washing bag or pillowcase.
• Do not wash in the appliance :
– Laundry without hems or with cuts
– Underwired bras.
– Use a washing bag to wash small
items.
• A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase
again.
WATER HARDNESS
If the water hardness in your area is
high or moderate, we recommend that
you use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to
use a water softener.
To know the water hardness in your
area, contact your local water authority.
Obey the instructions that you find on
the packaging of the products.
Equivalent scales measure the water
hardness:
• German degrees (°dH).
• French degrees (°TH).
STUBBORN STAINS
• mmol/l (millimol for each litre - inter-
national unit for the hardness of wa-
ter).
For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the
appliance.
• Clarke degrees.
Special stain removers are available.
Use the special stain remover that is ap-
plicable to the type of stain and fabric.
ENGLISH
21
Water hardness table
Water hardness
Level
Type
°dH
0-7
°T.H.
mmol/l
0-1.5
Clarke
0-9
1
2
3
4
soft
0-15
16-25
26-37
> 37
medium
hard
8-14
15-21
> 21
1.6-2.5
2.6-3.7
>3.7
10-16
17-25
>25
very hard
22
CARE AND CLEANING
WARNING!
CAUTION!
Do not use alcohol, solvents or
chemical products.
Disconnect the appliance from the
mains supply before you clean it.
MAINTENANCE WASH
With the low temperature programmes
it is possible that some detergent stays
in the drum. Make regularly a mainte-
nance wash. To do this:
• Empty the laundry from the drum.
• Set the hottest cotton wash pro-
gramme
• Use a correct quantity of powder de-
tergent with biological properties.
After each wash, keep the door open
for a while to prevent mould and to let
unpleasant smells go out.
DESCALING
The water we use contains limescale. If
it becomes necessary, use a water soft-
ener to remove limescales.
Use a special product made for wash-
ing machines. Obey the instructions
that you find on the packaging of the
manufacturer.
Do this separately from the laundry
wash.
EXTERNAL CLEANING
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
DOOR SEAL
Regularly examine the seal and remove
all objects from the inner part.
• Clean the drum with special product
for stainless steel.
• Start a short programme for cotton at
the maximum temperature with a
small quantity of detergent.
DRUM
Regularly examine the drum to prevent
limescale and rust particles.
Only use special products to remove
rust particles from the drum.
To do this:
ENGLISH
23
DETERGENT DISPENSER
To clean the dispenser:
1. Press the lever.
2. Pull the dispenser out.
1
2
3. Remove the top part of the liquid
additive compartment.
4. Clean all the parts with water.
5. Clean the dispenser recess with a
brush.
6. Put back the dispenser in the re-
cess.
WARNING!
DRAIN PUMP
1. Disconnect the mains plug
Regularly examine the drain
pump and make sure that it is
clean.
from the mains socket.
2. Do not remove the filter
while the appliance oper-
ates. Do not clean the drain
pump if the water in the ap-
pliance is hot. The water
must be cold before you
clean the drain pump.
Clean the pump if:
• The appliance does not drain the wa-
ter.
• The drum cannot turn.
• The appliance makes an unusual
noise because of the blockage of the
drain pump.
• The display shows an alarm code be-
cause of the problem with water
drain.
24
To clean the drain pump:
1. Open the drain pump door.
2. Pull the flap out to remove it.
3. Put a container below the recess of
the drain pump to collect the water
that flows out.
4. Press the two levers and pull for-
ward the drainage duct to let the
water flow out.
5. When the container is full of water,
put the drainage duct back again
and empty the container. Do steps
4 and 5 again and again until no
more water flows out from the
drain pump.
1
6. Pull back the drainage duct and
turn the filter to remove it.
2
7. Remove fluff and objects from the
pump.
8. Make sure that the impeller of the
pump can turn. If this does not oc-
cur, contact the service centre.
ENGLISH
25
9. Clean the filter under the water tap
and put it back in the pump into
the special guides.
2
10. Make sure that you tighten correct-
ly the filter to prevent leakages.
11. Put the flap back and close the
drain pump door.
1
•
4
The indicator of button
flashes
THE INLET HOSE FILTER AND
THE VALVE FILTER
and the display shows the related
alarm. Refer to 'Troubleshooting'.
It could be necessary to clean the filters
when:
• The appliance does not fill with wa-
ter.
WARNING!
Disconnect the mains plug from
the mains socket.
• The appliance fills with the water for
a long time.
To clean the water inlet filters:
1. Close the water tap.
2. Remove the water inlet hose from
the water tap.
3. Clean the filter in the inlet hose
with a stiff brush.
4. Remove the inlet hose behind the
appliance.
5. Clean the filter in the valve with a
stiff brush or a towel.
6. Install again the inlet hose. Make
sure that the couplings are tight to
prevent leakages.
7. Open the water tap.
45°
35°
If necessary, clean the pump.
Put the drainage duct back and close
the drain pump flap.
EMERGENCY DRAIN
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (6) of
'To clean the drain pump'.
26
When you drain the water with the
emergency drain procedure, you must
activate again the drain system:
1. Put 2 litres of water in the main
wash compartment of the deter-
gent dispenser.
2. Close the water tap.
3. Remove the water inlet hose
4. Put the two ends of the inlet hose
in a container and let the water
flow out of the hose.
5. Empty the drain pump. Refer to the
2. Start the programme to drain the
emergency drain procedure
water.
6. When the drain pump is empty, in-
stall the inlet hose again.
FROST PRECAUTIONS
WARNING!
If the appliance is installed in an area
where the temperature can be less than
0 °C, remove the remaining water from
the inlet hose and the drain pump.
Make sure that the temperature
is more than 0 °C before you
use the appliance again.
The manufacturer is not respon-
sible for damages caused by
low temperatures.
1. Disconnect the mains plug from the
mains socket.
ENGLISH
27
TROUBLESHOOTING
The start of the appliance does not oc-
•
•
•
- The appliance does not drain
the water.
- The appliance door is open or
not closed correctly.
cur or it stops during operation.
First try to find a solution to the prob-
lem (refer to the table). If not, contact
the service centre.
- The anti-flood device is on.
With some problems, the acoustic
signals operate and the display
shows an alarm code:
WARNING!
Deactivate the appliance before
you do the checks.
•
- The appliance does not fill
with water.
Problem
Possible cause
Possible solution
The appliance
does not fill with
water.
The water tap is closed.
Open the water tap.
The water inlet hose is
damaged.
Make sure that the water inlet
hose has no damages.
The filters in the water in- Clean the filters. Refer to 'Care
let hose is blocked . and cleaning'.
The water tap is blocked Clean the water tap.
or is furred with lime-
scale.
The connection of the
water inlet hose is not
correct.
Make sure that the connection is
correct.
The water pressure is too Contact your local water authori-
low.
ty.
The appliance
does not drain the damaged.
water.
The water drain hose is
Make sure that the water drain
hose has no damages.
The filter of the drain
pump is blocked.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
The connection of the
water drain hose is not
correct.
Make sure that the connection is
correct.
A washing programme
without the drain phase
is set.
Set the drain programme.
The function Rinse &
Hold is on.
Set the drain programme.
Close the door correctly.
The appliance
door is open or
not closed correct-
ly.
28
Problem
Possible cause
Possible solution
The anti-flood de-
vice is on.
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
The spin phase
does not operate.
The spin phase is off.
Set the spin programme.
The filter of the drain
pump is blocked.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
Balance problems with
the laundry load.
Adjust manually the items in the
tub and start the spin phase
again.
The programme
does not start.
The mains plug is not
connected in the mains
socket.
Put in the mains plug.
Blow out fuse in the
household fuse box.
Replace the fuse.
You did not press button
4
Press button
.
4
.
The delay start is set.
To start immediately the pro-
gramme, cancel the delay start.
The Child Lock function
is activated.
Deactivate the Child Lock func-
tion.
There is water on
the floor.
Leakages from the cou-
plings of the water ho-
ses.
Make sure that the couplings are
tight.
Leakages from the drain Make sure that the drain pump
pump.
filter is tight.
The water drain hose is
damaged.
Make sure that the water inlet
hose has no damages.
You cannot open
the appliance
door.
The washing programme Let the washing programme end.
is in operation.
There is water in the
drum.
Set the drain or the spin pro-
gramme.
The appliance
makes an unusual pliance.
noise.
Incorrect level of the ap- Adjust the level of the appliance.
Refer to 'Installation'.
You did not remove the
packaging and/or the
transit bolts.
Remove the packaging and/or
the transit bolts. Refer to 'Instal-
lation'.
The load is very small.
Add more laundry in the drum.
ENGLISH
29
Problem
Possible cause
Possible solution
The appliance fills The end of the drain
Make sure that the drain hose is
in the correct position.
with water and
hose is too low.
drain immediately.
The washing re-
The detergent you used Increase the detergent quantity
sults are not satis- was not sufficient or cor- or use a different one.
factory.
rect.
You did not remove the
stubborn stains before
you wash the laundry.
Use special products to remove
the stubborn stains.
Incorrect temperature
was set.
Make sure that you set the cor-
rect temperature.
Too much laundry load.
Decrease the laundry load.
After the check, activate the appliance.
The programme continues from the
point of interruption.
If the display shows other alarm codes,
contact the service centre.
If the problem occurs again, contact the
service centre.
30
INSTALLATION
UNPACKING
1. Use the gloves. Remove the exter-
nal film. If necessary, use a cutter.
2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
4. Remove the internal film.
5. Open the door. Remove the poly-
styrene piece from the door seal
and all the items from the drum.
ENGLISH
31
6. Put the front piece on the floor be-
hind the appliance. Carefully put
down the appliance with the rear
side on it. Make sure not to dam-
age the hoses.
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical po-
sition.
1
2
9. Remove the power supply cable
and the drain hose from the hose
holders.
10. Remove the three bolts. Use the
key supplied with the appliance.
11. Pull out the plastic spacers.
32
12. Replace the plastic spacers with
the plastic caps. You can find these
caps in the user manual bag.
WARNING!
We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
Remove all the packaging and
the transit bolts before you in-
stall the appliance.
POSITIONING AND LEVELLING
• Install the appliance on a flat hard
floor.
• Make sure that carpets do not stop
the air circulation below the appli-
ance.
• Make sure that the appliance does
not touch the wall or other units
• Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibra-
tion, noise and the movement of the
appliance when in operation.
x4
• The appliance must be level and sta-
ble.
CAUTION!
Make sure that there is sufficient
access after the installation for
possible repairs by a qualified
person.
Do not put cardboard, wood or
equivalent materials below the
appliance feet to adjust the lev-
el.
ENGLISH
33
tach it to the beams of the floor with
minimum 2 screws.
Installation on a not hard floor
When you install the appliance on a not
hard floor (wooden planks floor), put a
rigid support plinth under the appli-
ance feet to prevent the noise and the
vibration.
Assemble the plinth with a waterproof
wood panel (min. 15 mm thick) and at-
The plinth must extend of some cm
more than the edges of the appliance.
We recommend you to install the appli-
ance in one of the corners of the room,
where the floor is more stable.
THE INLET HOSE
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
45O
35O
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.
If you can not connect the water inlet
hose to the cold water tap of the pri-
mary hydraulic system, connect it to
your domestic cold water storage sys-
tem.
Make sure not to have more than a dis-
tance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of
the water storage tank.
Water pressure
The appliance works correctly if the wa-
ter pressure is not less than 0.05 MPa
(0.5 bar).
34
Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace
the hose.
A
WATER DRAINAGE
There are different procedures to con-
nect the drain hose:
With the plastic hose guide.
• On the edge of a sink.
• Make sure that the plastic guide can-
not move when the appliance drains.
Attach the guide to the water tap or
the wall.
• To a stand pipe with vent-hole.
Refer to the illustration. Directly into
a drain pipe at a height of not less
than 60 cm (23.6”) and not more than
100 cm (39.3”). The end of the drain
hose must always be ventilated , i.e.
the inner diameter of the drainpipe
(min. 38 mm — min. 1.5”) must be
larger than the external diameter of
the drain hose.
ENGLISH
35
• If the end of the drain hose is this
(see the drawing), you can push it di-
rectly into the stand pipe.
Without the plastic hose guide.
• To a sink spigot.
Refer to the illustration. Put the drain
hose in the spigot and tighten it with
a clip. Make sure that the drain hose
makes a loop to prevent that remain-
ing particles go in the appliance from
the sink.
• Directly to a built-in drain pipe in the
room wall and tighten it with a clip.
You can extend the drain hose
to maximum 400 cm. Contact
the service centre for the other
drain hose and the extension.
|