Installation Guide
Solecis AVS-SL-0201-824
Overview
Solecis AVS-SL-0201-824 Specifications (Cont.)
The Solecis AVS-SL-0201-824 (FG1330-1113-05) is the perfect solution for all
2x1 PC switching solutions. Designed for permanent installations and rental
companies alike.
RGB Output
Number:
Connector:
Level:
1
HD-15
Analog
Unity
75 ohm
The AVS-SL-0201-824 incorporates high resolution switching circuitry for all PC
applications up to UXGA. The AVS-SL-0201-824 can be user set to operate in
either manual, auto, or remote switching modes. The remote options include
control from both RS232 and Contact Closure while Auto modes allow either
priority or last presented input switching.
Gain:
Impedance:
Sync Output
Level:
The outputs are both 75 ohm driven with TTL sync restore for connection to long
cable runs. The audio inputs automatically follow the video input and are
converted to be either balanced or unbalanced signals on the output.
TTL
Impedance:
Audio Output
Number:
75 ohm
Input A Activity LED
2 (L/R)
green = currently selected input
Input B Activity LED
Audio Input A
(from PC 1)
Connectors:
Type:
Captive-wire
Balanced/Unbalanced
Unity
Audio Input B
(from PC 2)
Video Input A
(from PC 1)
Gain:
Video Input B
(from PC 2)
(front)
Impedance:
Power
600 ohm
Input Voltage:
Power Consumption:
Dimensions (HWD):
9-12VDC
15W
1.66” x 5.85” x 4.25” (42.2 mm x 148.6 mm x 108.0 mm)
• Height includes feet
• Depth includes connectors
Weight:
1.4 lbs. (0.65kg)
Included Accessories:
Certifications:
PS2.8 power supply (FG423-11)
• CE
• FCC class B, part 15
• RoHS/WEEE compliant
(rear)
Video OUT
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.
RS232 and
Contact Closure
Audio OUT
DIP Switches
FIG. 1 Solecis AVS-SL-0201-824
Liquid Spills
Product Specifications
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.
Solecis AVS-SL-0201-824 Specifications
RGB Input
For Safety Reasons
Number:
Connectors:
Level:
2
•
•
•
•
Do not place the unit on an unstable surface.
Do not use near water or sources of heat.
Use only recommended attachments.
Use the type of power supply as specified.
HD-15
Analog
1V p-p
75 ohm
Max Level:
Impedance:
Sync Input
Level:
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:
•
•
If liquid has been spilled or the unit has been exposed to rain or water.
If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
If the unit has been dropped or the cabinet damaged.
TTL/Analog
5v p-p
•
Max Level:
Impedance:
Audio Input
Number:
Installation
75 ohm
1.
Connect one end of the HD-15 cable to the output video socket of the
computer.
2.
3.
4.
Connect the other end to the INPUT A socket of the switcher.
Repeat for INPUT B.
2
Connectors:
Type:
3.5mm stereo
Connect a monitor or projector to the MAIN OUTPUT socket of the
switcher.
Unbalanced analog
2V p-p
Max Level:
Impedance:
RGB Video Bandwidth:
RGB Return Loss:
5.
6.
Connect Audio to the switcher Inputs using a 3.5mm Stereo Jack plug.
The output is taken from the captive-wire connector on the Main Output.
47K ohm
400MHz -3dB
45dB@10MHz, -27dB@100MHz
Adjacent Input Crosstalk: 73dB@10MHz, -50dB@100MHz
Audio Response: 20Hz-50KHz
|