The wide-angle mode is designed to scan short
distance, total darkness areas without overpower-
ing your viewing scene. The Super Long Range
mode allows you to see in total darkness up to 150
yards away!
APPLICATION
ulars, A comfortable ergonomic design makes the
Night Jaguar one of the best-looking Night Vision
Binoculars on the market. However, since looks
aren’t everything we used two top of the line 1st
Gen+ light intensifier tubes with super fast optics to
make the Night Jaguar not only a great looking unit
but the bestfunctioning 1st Gen binocular there is.
It is important to remember that the IR illuminator
is simply an infra red light source, and like any light
source, it may loose its effectiveness over a great
distance.
To turn on/off the Wide angle IR push the button
marked IR1 and release. To turn on the Super-long
range IR hold down the button marked IR2, to turn
off release the button. When holding down the IR2
button, the wide range IR will switch off.
NOTE: When installing the battery one should keep
inmindthatthepolarityofthebatteryshouldcoincide
withthediagramonthebodynexttothebatteryhous-
ing cap.
Objective lens protective cover is intended to pro-
tect the objective lens from dust and scratches. It
also will act as a daylight filter, allowing you to test
the scope in daylight or other bright light situations.
The pinhole in the center of the protective cover
allows the user to check the operation ability of the
device in daylight conditions.
NOTE: Do not test the scope in daylight conditions
even with the daylight filter/lens cap on for more than
ten (10) minutes.
NOTE: The IR will automatically turn off when the
unit’s main power switch is turned off.
STORAGE AND CARE
• If the device is not to be used for extended period
of time (more than 10 days) remove the battery.
• Avoid touching lenses. If fingerprints or traces of
dirtordustappear,cleantheirsurfacewithaPho-
tographic lens cleaning tissue.
• Keep lens cap/daylight filter on when not in use.
OPERATION
• The Night Jaguar is not harmful to the user or the
environment.
• Take the monocular out of the case.
• Install the battery into the housing with the polar-
ity order as shown on the scope. Battery Type: 3
Volt Lithium, #CR123A.
• Do not disassemble except to clean the front lens
and eyepiece: it will void your warranty.
• Evaluate the monocular function by looking
through it in a lit environment with the daylight
filter lens cap on. Never use in daylight without
the daylight filter lens cap on.
• To turn unit it on/off push the button on top of the
unit marked O/l with the protective lens cover still
attached to the lens. Do not turn the unit on in
the daytime without the protective lens cap
on. You should see green glow in the eyepiece.
You may notice a persistent green glow for up
to five (5) minutes after you have turned the unit
off. This is normal for the 1st Gen Light intensifier
tube.
• Never point the Night Jaguar at a bright light
source.
• Adverse atmospheric conditions such as fog,
smog or haze and a lack of ambient light (moon
or starlight) may diminish the effective viewing
distance.
• Observe the scene and adjust the diopters for
optimal image clarity.
• You may now enter a dark environment or simply
shut the lights off in order to darken the room.
TROUBLESHOUTINGS
Q: Flashes, flickers or clicking occur while operat-
• Next, remove the lens cap/daylight filter. You
should not have to readjust the diopter.
ing.
S: If it occurs within the first five minutes of insert-
ing new batteries, it is normal and the device
will resume normal operation soon thereafter. If it
occurs for more than 10 minutes, contact service
instructions.
NOTE: We suggest that you focus the diopter during
daylight with the filter on.
INFRA-RED
ILLUMINATOR
Q: Dark spots on screen.
S: These are either cosmetic blemishes in the
intensifier tube or dust particles.
Infra-red (IR) illuminators, are common to night
vision. The IR light greatly enhances the perform-
ance of the Night Jaguar while remaining almost
totally invisible to the naked eye. The IR illuminator
on the Night Jaguar is located next to the front lens.
Q: Screen becomes darker than at previous use.
S: Replace batteries. If problem persists, contact
your dealer or other authorized service representa-
tive for service instructions.
New Dual Infra-red illuminator system with two dis-
tinct infra-red illuminator modes:
Q: Image not clear.
S: Adjust objective lens, and/or the eyepiece.
Wide-angle mode or Super Long Range mode.
2
LIMITATION OF LIABILITY
2 YEAR PRODUCT WAR-
RANTY
ATN will not be liable for any claims, actions, suits, pro-
ceedings, costs, expenses, damages or liabilities aris-
ing out of the use of this product. Operation and use of
theproductarethesoleresponsibilityoftheCustomer.
ATN’s sole undertaking is limited to providing the prod-
ucts and services outlined herein in accordance with
the terms and conditions of this Agreement. The provi-
sion of products sold and services performed by ATN
to the Customer shall not be interpreted, construed or
regarded, either expressly or implied, as being for the
benefit of or creating any obligation toward any third
party of legal entity outside ATN and the Customer;
ATN’s obligations under this Agreement extend solely
to the Customer. ATN’s liability hereunder for dam-
ages, regardless of the form or action, shall not
exceed the fees or other charges paid to ATN by
the customer or customer’s dealer. ATN shall not,
in any event, be liable for special, indirect, inci-
dental or consequential damages, including, but
not limited to, lost income, lost revenue or lost
profit, whether such damages were foreseeable or
not at the time of purchase, and whether or not
such damages arise out of a breach of warranty, a
breach of agreement, negligence, strict liability or
any other theory of liability.
This product is guaranteed to be free from manu-
facturing defects in material and workmanship under
normal use for a period of 2 (two) years from the date
of purchase. In the event a defect that is covered by
the foregoing warranty occurs during the applicable
period stated above, ATN, at its option, will either
repair or replace the product, and such action on the
part of ATN shall be the full extent of ATN’s liability,
and the Customer’s sole and exclusive remedy. This
warranty does not cover a product (a) used in other
than its normal and customary manner; (b) subjected
to misuse; (c) subjected to alterations, modifications
or repairs by the Customer of by any party other than
ATN without prior written consent of ATN; (d) special
order or “close-out” merchandise or merchandise
sold “as-is” by either ATN or the ATN dealer; or (e)
merchandise that has been discontinued by the man-
ufacturer and either parts or replacement units are
not available due to reasons beyond the control of
ATN. ATN shall not be responsible for any defects
or damage that in ATN’s opinion is a result from
the mishandling, abuse, misuse, improper storage
or improper operation, including use in conjunction
with equipment which is electrically or mechanically
incompatible with or of inferior quality to the product,
as well as failure to maintain the environmental con-
ditions specified by the manufacturer. CUSTOMER
IS HEREBY NOTIFIED THAT OPERATION OF
THE EQUIPMENT DURING DAYLIGHT HOURS OR
UNDER ANY EXCESSIVE LIGHT CONDITIONS
MAY PERMANENTLY DAMAGE THE INTERNAL
COMPONENTS OF THE UNIT AND SAID DAMAGE
WILL NOT BE COVERED UNDER THIS WAR-
RANTY. This warranty is extended only to the orig-
inal purchaser. Any breach of this warranty shall
be waived unless the customer notifies ATN at the
address noted below within the applicable warranty
period.
PRODUCT WARRANTY REGISTRATION
In order to validate the warranty on your product, ATN
must receive a completed Product Warranty Regis-
tration Card for each unit. Please complete the form
below and immediately mail it to our Service Center:
ATN Corporation, 20 South Linden Ave., Suite 1B,
South San Francisco CA 94080. Products qualifying
for warranty repair will be either repaired or replaced
within 10 business days of receipt of merchandise
unless the customer is notified otherwise.
OBTAINING WARRANTY SERVICE
To obtain warranty service on your unit, take or send
the product, postage paid, with a copy of your sales
receipt to our service center, ATN Corporation at the
address noted above. All merchandise must be fully
insured with the correct postage; ATN will not be
responsible for improper postage or, missing or dam-
aged merchandise during shipment.
The customer understands and agrees that except
for the foregoing warranty, no other warranties writ-
ten or oral, statutory, expressed or implied, including
any implied warranty of merchantability or fitness for
a particular purpose, shall apply to the product. All
such implied warranties are hereby and expressly
disclaimed.
For customer service and technical support,
please contact
American Technologies Network Corp.
North American Office
20 S. Linden Ave. Suite 1B, South San Francisco,
CA 94080
phone: 800-910-2862, 650-875-0130; fax:
650-875-0129
European Office
phone: 44(0)870-0111286, fax: 44(0) 845-3349142
The following countries can use our
toll free number 00 800 9102-8620
Austria, France, Germany, Holland, Italy, Spain,
Sweden, Switzerland
1
|
