Table of Contents
Safety
Electrical safety
………………………………………………………………
………………………………………………………………
1
1
1
1
2
Installation safety ………………………………………………………………
Cleaning safety
………………………………………………………………
………………………………………………………………
Special notes on LCD
monitors
Package contents
………………………………………………………………
………………………………………………………………
2
3
Installation
instructions
Placement
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
3
3
4
5
7
8
8
8
8
9
Installation
External controls
Image adjustment
Screen adjustment
Attachments
Plug and play
Power saver
Troubleshooting
Technical
specifications
Display modes
………………………………………………………………
10
Special notes on LCD monitors
The following symptoms are normal for LCD monitors and do not indicate a problem with
the device:
y Due to the nature of the fluorescent light, the screen may flicker during initial
use.Turnoffthepowerswitchandthenturnitonagaintomaketheflickerdisappear.
y Youmayfindslightlyunevenbrightnessonthescreendependingonthedesktoppattern
you use.
y The LCD screen has effective pixels of 99.99% or more. It may include blemishes
of 0.01% or less (caused by a missing pixel or a pixel that is always lit).
y When the same image is displayed for hours on end, its afterimage may remain after
switchingtoanewimage.Whenthishappens,thescreenwillrecoverslowlybychanging
the image. Turning the LCD monitor off for several hours will also correct this
problem.
Package contents
LCD display
D-Sub signal cable
DVI signal cable
(optional)
Quick Start Guide
(with speakers)
Power cable
User's Guide (CD)
2
Installation instructions
Note: Read the Safety section carefully before starting the installation.
Placement
When installing your LCD monitor, consider the placement of the monitor:
y Tominimizethereflectionofthemonitor, protectyoureyes, andensure
premium quality, don’t install your LCD monitor near windows or where
there is backlight. Keep the monitor at least 30 cm away from your eyes.
y The upper edge of the monitor should be just a little higher than your
line of sight.
y Adjust the front and back dip angles of the monitor, so that you can
view the display comfortably.
Connecting the base to the monitor
Installati
on
Take the base out of the box and place it on a
flat table.
y Position the monitor on top of the base.
y Connectthebaseintotheneckofthemonitor
along the track.
y You will hear a click sound when the base
and the monitor are properly connected.
Connecting the LCD monitor to a PC
y Make sure that the power supply of your PC
isturnedoffandthepowerplugisremoved.
y Connect and fasten both ends of the signal
cable to your PC host and LCD monitor,
respectively.
y ConnecttheattachedpowercabletoyourLCD
monitor.
y Plug the power cable into the receptacle.
y Use the cable tie to bind up the power cord
and the D-sub signal cable / DVI-D cable.
y Turn on the power supplies of your PC and
LCD monitor.
X Power cable
Y DVI signal cable
(optional)
Z D-Sub signal cable
3
External
controls
Power On/Off
Green indication: Power is on and normal.
Power source Orangeindication:Sleepstatusintheenergy-saving
mode.
1
Colorless indication: Power off.
Press this button to enter OSD. Press it again to exi
2
3
Menu
>
OSD Menu
OSD.
Press this button for selection or adjustment when
OSD is started.
Plus
Press this button and click < and > to adjust volume
4
5
<
Minus
when OSD is not started (for the model with speakers
only).
Press this button to exit the manual when OSD is
started.
Press this button for the display to optimize the
position, phase and clock pulse automatically when
OSD is not started.
Automatic
adjustment
Auto
4
The image settings of your LCD monitor were adjusted to their optimal status
for analog TV before shipment. (See Page 9). If you want to adjust the image
settings to suit your personal preference, follow the steps below:
1. Click Menu to display the OSD window as shown in the following figure.
2. Click Plus or Minus to select the function to be adjusted as shown in
the following figure.
Image
adjustment
for analog
3. Click the Menu again to select the function to be adjusted.
4. Click Plus or Minus to change current settings.
5. To exit the OSD window, select " " to close and save changes. To change
other settings, repeat steps 2-4.
Bright/Contract
Phase/Clock pulse
Horizontal/Vertical
Color Temp. Adjustment
Language Selection
OSD Setting
Auto
Message
Restore
Exi
(Analog)
5
The image settings of your LCD monitor were adjusted to their optimal status
fordigitalTVbeforeshipment. (SeePage9). Ifyouwanttoadjusttheimage
settings to suit your personal preference, follow the steps below:
1. Click Menu to display the OSD window as shown in the following figure.
2. Click Plus or Minus to select the function to be adjusted as shown in
the following figure.
Image
adjustment
for
digital
3. Click the Menu again to select the function to be adjusted.
4. Click Plus or Minus to change current settings.
5. To exit the OSD window, select “ ” to close and save changes. To change
other settings, repeat steps 2-4.
Bright/Contrast
Phase/Clock Pulse
Horizontal/Vertical
Color Temp. Adjustment
Language Selection
OSD Setting
Input Selectio
Message
Restore
Exit
(Digital)
6
Screen
adjustment
Function Definition
Primary Secondary
Secondary
directory items
directory directory
Description
symbol
symbol
Adjusts the contrast between the foreground
and background of an image on the screen.
Adjusts the background brightness of the
screen.
Contrast
Brightness
Phase
Adjusts the focus of the image
(for analog input adjustment only).
Adjusts the clock pulse of the image
(for analog input adjustments only).
Clock pulse
Moves the image left and right on the screen
(for analog input adjustments only).
Horizontal
Moves the image up and down on the screen
(for analog input adjustments only).
Vertical
Warm color
temperature
Cold color
temperature
User
N/A
N/A
Sets the color temperature to warm white.
Sets the color temp to cold white.
Definition/Red
User
Definition/Gree
n
Adjusts red/green/blue gain.
User
Definition/Blue
English
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Deutsch
Français
Español
Italiano
Used to select the language you want.
Hollands
Suomalainen
Русский
Horizontal
Vertical
Moves OSD left and right.
Moves OSD up and down.
OSD time displayAdjusts OSD time display settings.
Sets up horizontal, vertical, sequence and
focusautomatically(foranaloginputonly).
N/A
Auto adjustment
Usedtoselecttheinputsourceyouwant(for
DVI input only).
N/A
N/A
Analog digital
Display resolution, H/V frequency and the
input port used for current input timing
Message
function.
N/A
N/A
Restore
Exit
Restores system to default settings.
Closes the OSD window and saves changes.
7
Attachments
Plug and play
y TheproductprovidesthelatestVESAplug and playfeaturetoprevent
complicatedandtime-consuminginstallationprocedures.Theplugand
play feature allows your computer system to identify the LCD monitor
easily and set up its functions automatically.
y The LCD monitor transfers the Extended Display Identification Data
(EDID) to your computer system via the Display Data Channel (DDC),
so that your computer can use the self-setting function of the LCD
monitor.
y The LCD monitor has a built-in Power Control System (Power Saver).
y When the LCD monitor is not operated for a period of time, the Power
Control System automatically sets the system at low voltage status
to save power. Move the mouse slightly or press any key to return
to normal operation.
Power saver
y The Power Saver function can only be operated by the display card
ofthecomputersystem.Youcansetupthisfunctionfromyourcomputer.
y The LCD monitor is compatible with EPAENERGY STAR NÜTEK when used
with VESA DPMS.
y To save power and extend the life of the product, turn off the LCD
monitor power supply when it is idle for a long time or not being
used.
Troubleshooting
Power LED does
y Check that the power switch is turned on.
y Make sure the power cable is connected.
y Check that the power switch is turned on.
y Make sure the power cable is connected.
y Ensure that the signal cable is inserted in the receptacle
appropriately.
not light
Icon off
y The Power Saver may turn off the monitor automatically during the
operation. Make sure the monitor is restored when you press any key
from the keyboard.
Color default
y Referto"ColorTemp. Adjustment"toadjustRGBcolororselectcolor
temperatures.
Instability
or ripple
y Remove any electronic equipment in the vicinity that may cause EMI
interference.
y Check the signal cable of the monitor to ensure that none of the pins
are bent.
Image offset
or wrong size
y Presstheautoadjustmentbuttontoautomaticallyoptimizethescreen.
y Set up the reference position.
8
Technical specifications
Panel dimension
Diagonal 559 mm (22 inch) LCD monitor
1,680 x 1,050 / WXGA+
Up to 16.2 M true color
Horizontal 0.282mm x Vertical 0.282mm
300 cd/m2
Max. resolution
Max. pixel
Pixel span
LCD panel
(backlight
source)
Brightness
Contrast
700 : 1
LC response time
Visual angle
Effective display
5 ms
Horizontal 170° / Vertical 160°
Horizontal 473.8 mm x Vertical 296.1 mm
Simulated video frequency: 0.7 Vpp, 75Ω
(separate SYNC and composite SYNC)
Signal mode
Input signal
Horizontal 30 kHz – 82 kHz x Vertical 56 Hz – 76
Hz
SYNC frequency
Max. pixel clock
135MHz
Input terminal Image
Power transformer
D-Sub 15 PIN (VESA) / DVI-D (Optional)
AC100 – 240 Volts, 50 – 60 Hz
48W
Operation mode
Power
consumption
Power saving sleep
mode
2W @230VAC 50Hz
Power saving off mode1W @230VAC 50Hz
Temperature
Humidity
5°C – 35°C (operation) / -20°C – 55°C (storage)
20% – 80% (operation) / 20% – 85% (storage)
513.5 x 198.2 x 405.2 mm
Environmental
conditions
Actual dimensions (W x D x H)
Net weight
4.9 kg
TCO03;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B;V
CCI-B;
CE/EMC;C-Tick; BSMI; ISO
Safety standard
13406-2;EPA;PCT;NOM;WEEE;PSB;HG
Lamp disposal
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
9
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethat
may cause undesired operation.
ThisClassBdigitalapparatusmeetsallrequirementsoftheCanadianInterference-
Causing Equipment Regulations.
Cet appareil numérique de la class B respecte toures les exigencies du Réglement
sur le materiel brouilieur du Canada.
Display modes
If the signal of your PC system is the same as one of the following reference
signal modes, the screen will be adjusted automatically. If not, the screen
will not display or only the LED lights will display. For more information
about the adjustment mode, refer to the instructions of your display card.
Hor.
Frequency
(kHz)
Vert.
Frequency
(Hz)
Pixel
Frequency
(MHz)
SYNC Polarity
(H/V)
Display Mode
VESA
VGA 640x480
31.469
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
55.935
59.940
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
55.887
25.175
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
106.5
-/-
-/-
-/-
+/+
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
-/+
SVGA 800x600
XGA 1024x768
SXGA 1152x864
SXGA 1280x1024
WXGA+ 1440x900
WXGA+ 1680x1050
720x400
65.29
59.954
70.087
66.667
74.500
74.720
146.25
28.322
30.240
57.283
80.000
-/+
VGA TEXT
31.469
35.000
49.725
60.150
-/+
-/-
-/-
-/-
Macintosh
640x480
832x624
1024x768
Download from Www.Somanuals1.c0om. All Manuals Search And Download.
|