REPLACING LAMP HOOD
(For AeroGarden Classic, AeroGarden Deluxe, AeroGarden PRO100 and AeroGarden PRO200
)
Remove Lamp Hood from Lamp Arm:
Locking
Tab 1
Unplug AeroGarden; remove Bowl from Base.
1
Disconnect Lamp Cord from Lamp Hood
2
socket and remove Grow Bulbs from
Lamp Hood. CAUTION – Grow Bulbs
may be hot!
Lamp
Hood
Turn AeroGarden around so the back
is facing you.
3
4
5
Press in on Locking Tab 1 located on
Lamp Hood vent.
At the same time, use other hand to
push up on silver ring (where Lamp Hood
attaches to Lamp Arm).
Lamp Arm
Base
To install Lamp Hood:
Push Lamp Cord firmly into socket in new
Lamp Hood.
1
Center hands over Lamp Arm and push
Lamp Hood down until you hear a “click.”
2
Insert Grow Bulbs; return Bowl to Base; and
plug in AeroGarden.
3
Refer to your Quick Start Guide for more help or
© 2008 AeroGrow International, Inc.
300417AA 6/3/08
|