™
(24" Dia. x 48" Wide)
1. Never attach a garden hose to the fill/drain hole when
filling. Dangerous pressure build up could occur inside
roller.
Roller Drum:
O.A. Width:
Bearings:
24" Dia. x 48" Wide Welded Steel
Approximately 52"
1" I.D., Replaceable
2. Do not fill roller to maximum weight without checking
capability of vehicle to safely pull and stop.
Tow Hitch:
Std. Pin Type - 1/2" Hole
Weight w/ Water: Up to 910 Lbs. Filled with Water
(Note: May be filled with sand)
3. Never use roller up and down hills; always work across
hills and slopes.
Approx. Sh. Wt.: Approximately 165 Lbs.
4. Use caution when turning, slowing or stopping.
5. Always drain roller to keep from freezing.
Printed in USA
© 2004 Agri-Fab, Inc.
Form No. 40255 (9/06)
|