Interface Board for Non-Aiphone Speaker and Call Button with AI-900 System
- INSTRUCTIONS -
The AI-CP170 Interface board provides the necessary interface for any standard speaker with a 25V transformer and a
Normally Open call button to be used as a remote station on the AI-900 system. Simple wire connections are provided
for easy connection. Install the small circuit board behind the remote speaker or call button. Made for indoor use only.
WIRING DIAGRAM:
* 8 Speaker with
25V Transformer
Connector on
AI-900RS Card
Gray to
Blk
Common of
Transformer
Brn
Gray
Org
*Top view of
connector
Brown
Orange
Violet
Red
Red to
1W Tap on
Transformer
Black
Violet
*Important, When connector
is plugged into AI-900RS,
Orange should be on top
Red & Gray wires to Speaker
Violet wires to call button
Normally Open
Call Button
* For best acoustics, speaker must be located in the center of the room, mounted in the ceiling
SPECIFICATIONS:
Power Source:
Speaker:
Call Button:
Mounting:
Supplied by Main Frame (AI-900MF)
Use standard 8 ohm speaker with 25V transformer
Normally open momentary contact
Conceal behind speaker or call button
Terminations:
Wiring:
Wiring Distance:
Color-coded prewired pigtails
3 conductor shielded, homerun from Main Frame to each speaker/call button
2,625' w/ 22AWG, 4,265' w/ 18AWG
Dimensions (HxWxD): 1-3/8" x 15/16" x 1/2"
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
TOLL FREE TECHNICAL SUPPORT: (800) 692-0200
AI-CP170 Instr.
0309PHJS
E-MAIL: [email protected]
FAX (425) 455-0071
|