Ver. 1A
Section 2
Installing Driver
Quick Installation Guide
Note: The following steps and screen shots are for
Windows XP. Steps for other Windows operating
systems will be noted beneath each screen shot.
Model # AGIGA32PCI
Step 1 At the Found New Hardware Wizard, select Install from a list or
specific location (Advanced) and click Next.
Package Content:
· 32-bit PCI Gigabit Ethernet
Card
· Driver Disk
· Quick Installation Guide
Section 1
1
Installing Hardware
Step 1 Shut down the computer, unplug its power cord, and remove the chassis
cover.
Step 2 Insert the Ethernet card into a PCI slot on the computer and secure it with
a chassis screw.
Windows 2000: Click Next at the Found New Hardware Wizard. Select
Search for a suitable driver for my device (recommended) and click Next.
Step 3 Cover the computer’s chassis.
Windows ME: Click Next at the Add New Hardware Wizard. Select Specify
the location of the driver (Advanced) and click Next.
Step 4 Connect an Ethernet cable to the RJ-45 port of the Ethernet card.
Step 5 Re-plug the power cord and turn on the computer.
Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search
for the best driver for your device (Recommended) and click Next.
Step 4 Click Continue Anyway at the Windows Logo Compatibility message.
Step 5 Click Finish. Restart your computer.
Windows 2000: Click Yesto continue.
Windows 2000: Click Finish. Restart your computer.
Windows ME: Click Finish. Restart your computer.
Windows 98SE: Click Finish. Restart your computer.
Windows ME: Insert the Windows ME CD-ROM and click OK.
Windows 98SE: Insert the Windows 98SE CD-ROM and click OK.
Section 3
Technical Specifications
Section 4
Technical Support
General
E-mail: [email protected]
Toll Free: 1-888-746-3238
Standards:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3x Flow Control
Protocol:
CSMA/CD
Data Transfer Rate:
Ethernet: 10Mbps (half), 20Mbps (full)
Fast Ethernet: 100Mbps (half), 200Mbps (full)
Gigabit Ethernet: 1000Mbps (half), 2000Mbps (full)
Topology:
Star
Network Cables:
Ethernet: 2-pair UTP Cat. 3, 4, 5, EIA/TIA-568 STP
Fast Ethernet: 2-pair UTP Cat. 5, EIA/TIA-568 STP
Gigabit Ethernet: 4-pair UTP Cat. 5, EIA/TIA-568 STP
LED Indicator:
RJ-45 Port:
Link, Activity
Auto MDI-II/MDI-X port
Physical and Environmental
4.5 watts (max.)
Power Consumption:
Temperature:
Operating: -10° ~ 40° C, Storage: -10° ~ 70° C
Operating: 10% ~ 90%, Storage: 5% ~ 90%
59 x 120 x 15 mm (W x D x H)
Humidity:
Dimensions:
EMI:
FCC Class B, CE Mark B, VCCI-B
|