ALVIN Satin-Glow Lightboxes
Instructions for Cutting Glass
1
8
• Double-strength window glass*
• Thickness: ⁄ "
• Chamfer smooth all edges
MODEL No.
Cut Glass to This Size
15
15
16
16
LB1218
LB1620
LB1824
LB2436
11 ⁄ " x 17 ⁄ "
15 15
16
16
15 ⁄ " x 19 ⁄ "
15
15
16
16
17 ⁄ " x 23 ⁄ "
15
15
16
16
23 ⁄ " x 35 ⁄ "
IMPORTANT NOTE
It is highly recommended that these dimensions be
double-checked against your lightbox before cutting glass.
* It is best to purchase glass from a glass dealer rather than a hardware or home center.
Care and Use Instructions
1. To install glass, remove the two aluminum
strips on the top surface of the lightbox. For
your own safety, use gloves when handling
glass. Place the glass on top of the Plexiglas
sheet and replace the aluminum strips.
2. To operate, depress the on/off switch and
hold for one or two seconds until the lights
illuminate. Note: Bulbs may loosen during
shipping. If bulbs don’t illuminate check that
they are properly seated in fixture.
3. The Satin-Glow Lightbox is designed to
operate on 110V AC, 60 cycle. Please do
not use any other power source.
4. Removal of the back panel or tampering
with the electrical circuitry will void the
warranty and releases the manufacturer
from all responsibility for damages, loss
of property and/or personal injury.
To Replace Fluorescent Tubes
1. “Daylight” bulbs with CRI of 70 or
greater are recommended. Always use
direct replacement lamps in order to
prevent overheating.
4. Remove the hold-down screws and lift
off the light diffusers.
5. Remove and replace fluorescent tubes.
6. Return diffusers, glass and Plexiglas
panels to their original positions.
Re-install aluminum strips and screws.
2. Disconnect the power cord.
3. Remove the screws and aluminum strips from
the top surface of the lightbox. Carefully
remove glass and Plexiglas panels.
Degrees of Illumination
MODEL No.
Lumens
per Tube
Tubes
per Box
Lumens at
Light Box Surface
LB1218
LB1620
LB1824
LB2436
650
650
650
1750
1 F15T8
2 F15T8
2 F15T8
3 F30T8
650
1300
1300
5100
All electrical components are U.L. listed.
Alvin & Company, Inc.
Bloomfield, CT
Grand Prairie, TX
|