Amana Range AGG222VD User Manual

20" (50.8 cm) Freestanding Gas Range  
PRODUCT MODEL NUMBERS  
PRODUCT DIMENSIONS  
AGG222VD  
Gas supply: Provide a gas supply line of 3/4"  
(1.9 cm) rigid pipe to the range location. A smaller  
size pipe on longer runs may result in insufficient  
gas supply. Pipe joint compounds that resist the  
action of LP gas must be used. Do not use  
TEFLON®† tape. With LP gas, piping or tubing size  
can be 1/2" (1.3 cm) minimum. Usually, LP gas  
suppliers determine the size and materials used in  
the system.  
If local codes permit, a new CSA design-certified,  
4-5 ft (122-152.4 cm) long, 1/2" (1.3 cm) or 3/4"  
(1.9 cm) I.D., flexible metal appliance connector may  
be used for connecting range to the gas supply line.  
41-11/12"  
(106.6 cm)  
A 1/2" (1.3 cm) male pipe thread is needed for  
connection to the female pipe threads of the inlet to  
the appliance gas pressure regulator.  
Electrical: A 120-volt, 60-Hz, AC-only, 15-amp,  
fused electrical circuit is required. A time-delay fuse  
or circuit breaker is also recommended. It is  
recommended that a separate circuit serving only  
this range be provided.  
19-3/4"  
(50 cm)  
Do not use an extension cord.  
25-7/8"  
(65.9 cm)  
†®TEFLON is a registered trademark of E.I. Du Pont De  
Nemours and Company.  
CABINET OPENING DIMENSIONS  
13" (33.0 cm) max.  
upper cabinet depth  
20" (50.8 cm) min.  
For minimum  
clearance to  
top of cooktop,  
see NOTE  
cabinet opening width  
20-1/8" (51.12 cm)  
opening width  
18" (45.7 cm)  
min. clearance  
upper side  
2" (5.1 cm) min.  
countertop space to  
side wall or other  
combustible material  
cabinet to  
countertop  
This shaded area  
recommended for  
installation  
of gas pipe  
This shaded area  
recommended for  
electrical outlet.  
10" (25.4 cm)  
24"  
NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is  
protected by not less than 1/4" (0.64 cm) flame retardant millboard  
covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm)  
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.  
30" (76.2 cm) minimum clearance between the top of the cooking  
platform and the bottom of an unprotected wood or metal cabinet.  
(61.0 cm)  
5 1/2"  
(14 cm)  
4"  
(10 cm)  
4"  
2"  
(5.1 cm)  
(10 cm)  
IMPORTANT: If installing a range hood or microwave hood  
combination above the range, follow the range hood or microwave hood  
combination installation instructions for dimensional clearances above  
the cooktop surface.  
2 1/2"  
(6.4 cm)  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Ref. W10173755  
08-27-08  
 

3Com Switch 5124M TP User Manual
ADTRAN Router A203 User Manual
Aiphone Answering Machine A User Manual
Aiphone Telephone YAZ 90 3W User Manual
Alcatel Lucent Network Card 7342 ISAM FTTU User Manual
Alphasonik Car Amplifier PLD40E User Manual
Amana Air Conditioner 18M23TB User Manual
Amana Clothes Dryer NGD7300W User Manual
AMX Stereo System DAS AMFM User Manual
AVerMedia Technologies TV Receiver HD MCE A180 User Manual