SALEM 14™
RECESS BATH
ENAMELED STEEL
BARRIER FREE
SALEM 14™ RECESS BATH
❏ 0155.017 Right hand outlet
❏ 0153.015 Left hand outlet
Product Features:
• Acid resisting, heavy gauge, enameled
steel one-piece recess bath
• Integral apron
• End drain outlet
• Slip-resistant surface
• Straight tiling bead
• Fully-bonded support pad
Nominal Dimensions:
1524 x 762 x 356mm
(60" x 30" x 14")
Bathing Well Dimensions:
1346 x 610 x 337mm
(53" x 24" x 13-1/4")
OPTIONAL TO FINISHED TO FINISHED
NOTE: NO CONCEALED
PIPING FURNISHED
FLOOR (USUALLY BETWEEN 1651 to
1981mm ( 65" & 78')
1/2 S.P.S. OR 1/2"
C.W.T. SUPPLIES
SHOWER 1/2" S.P.S.
711mm
(28)
76mm
(3)
203mm
(8)
229 x 305mm
(9 x 12") CUTOUT
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4 for Enameled Steel Plumbing
Fixtures
19mm
(3/4)
FINISHED
197mm
(7-3/4)
WALL
C/L OF DRAIN
C/L OF SHOWER CURTAIN ROD
(USUALLY 1930mm (76")
FROM FIN. FLOOR)
• ASTM F-462 for Slip-resistant Bathing Facilities
FINISHED
1524mm
(60)
C/L OF VALVES
102mm
WALL
(44mm [1-3/4"]
(8)
DIA. HOLES)
102
(4)
365mm
(14-3/8)
To Be Specified:
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain: 1583.470
SPOUT
305mm
1/2" S.P.S.
(12)
102 (4)
FINISHED
WALL
356mm
ROUGH
FLOOR
(14)
19mm
(3/4)
762mm
(30)
1-1/2 N.P.T.M. THREADS
1-1/2 O.D. TAILPIECE
13mm
(1/2)
* See faucet section for additional models available
PLUMBER NOTE:
PROVIDE SUITABLE FULL LENGTH
SUPPORT AT THIS POINT.
SUMP PAD
NOTES:
0153.015 LEFT HAND OUTLET (SHOWN).
0155.017 RIGHT HAND OUTLET (REVERSE DIMENSIONS).
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR
ADDITIONAL INFORMATION.
SHOWN WITH POP-UP C.D. & O.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED PIPING NOT INCLUDED.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
H162
© 2008 AS America Inc.
Revised 2/08
|