SAVONA™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
SAVONA™ COUNTERTOP SINK
• Raised faucet deck with backsplash rim
• Made from vitreous china
• Self-rimming with cutout template supplied
• Soap/accessory ledge
• Rear overflow
• Design matched to Savona toilets
• Shown with 8871.902 Lexington spread faucet
❏ 0186.803 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0186.403 Faucet holes on 4" (102mm) centers
❏ 0186.001 Center hole only
Nominal Dimensions:
559 x 432mm
(22" x 17")
203mm
OPTIONAL
(8)
FINISHED WALL
OR SPLASHBACK
70mm
(2-3/4)
Bowl sizes:
406mm (16") wide
254mm (10") front to back
152mm (6") deep
216mm
(8-1/2)
432mm
(17)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixture
559mm
(22)
COUNTERTOP
25mm
(1)
(BY OTHERS)
SEALING
COMPOUND
25mm
(1)
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
178mm
(7)
260mm*
(10-1/4)
❏ Faucet Finish:
318mm*
(12-1/2)
❏ Supplies:
❏ 1-1/4" Trap:
SUPPLIES
AS REQ'D
203mm
(8)
178mm
(7)
* See faucet section for additional models available
787mm
(31)
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J26
© 2008 AS America Inc.
Revised 2/08
|