HERITAGE™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
HERITAGE™ COUNTERTOP SINK
• Large, oval drop-in sink made from vitreous china
• Self-rimming with cutout template supplied
• Dual front overflow
• Large deck area (faucet not included)
❏ 0456.017 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0456.013 Center hole only
Nominal Dimensions:
660 x 495mm
(26" x 19-1/2")
Bowl sizes:
457mm (18") wide
305mm (12") front to back
152mm (6") deep
(3) 35mm(1-3/8)
203mm
(8)
FINISHED WALL
OR SPLASH BACK
DIA. HOLES
OPTIONAL
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
76mm(3)
191mm
(7-1/2)
495mm
(19-1/2)
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
660mm
(26)
16mm
(5/8)
SEALING COMPOUND
COUNTERTOP
(BY OTHERS)
* See faucet section for additional models available
*
279mm
(11)
197mm
(7-3/4)
102mm
(4)
343mm
(13-1/2)
*
SUPPLIES
AS REQUIRED
102mm
(4)
178mm
(7)
1-1/4 O.D.
WASTE OUTLET
787mm
(31)
SUGGESTED
1-1/4 O.D.
TAILPIECE
FINISHED FLOOR
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J23
© 2008 AS America Inc.
Revised 2/08
|