DVI to Mini DisplayPort Converter
AT-DP400
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
INTRODUCTION
The Atlona AT-DP400 is DVI (Dual Link) to Mini DisplayPort Converter. This is one of a kind device is specifically designed
for any digital DVI source signal (such as a Mac/PC Computer with DVI output) to be displayed on the Apple iMac
27” or Apple 24” LED Cinema Display®. The DP400 allows users to take advantage of the extremely high resolution
(2560x1440) that iMac 27” is capable of supporting. Along with its small, compact design, the converter is USB powered,
which means that when your computer is ON the converter is ON as well. With the additional ability of passing along all
EDID and HDCP information, the Apple tested and Apple approved DP400 is exactly what Mac users have been waiting
for.
FEATURES
• Allows dual link DVI (digital only) signal to display on the iMac 27” or Apple 24” LED
• Supports Dual Link resolutions up to 2560x1600 or more common 2560x1440 used by iMac 27”
• True pixel to pixel signal
• Fully tested with all Apple computers ever made featured with DVI output
• HDCP Compatible, which means that you can play copy protected material though our converter
• Full EDID Return, the computer will not even know that it is connected though a converter, it will only see the display
and the converter will pass all the display’s capabilities to the computer
• Re-Clocking technology will insure that signal stays the same quality as it was before entering the converter
• Video Pass-Though, no scaling (EDID and HDCP compliant)
• Easy to install and simple to operate
• Powered though attached USB cable (no external power needed)
• 7-inch DVI and 7-inch USB cables are attached to the converter
• Converter is only hardware based, therefore will never have any issues with new operating systems or if Apple up-
dates the current operating system
PACKAGE CONTENT
• DVI to Mini DisplayPort Converter with attached 7-inch DVI and USB Cables
• Operational Manual
APPLICATIONS
• Any Mac or PC computer with DVI output to be connected to iMac 27” or 24” Cinema Display
• Convert any digital DVI signal into Mini DisplayPort
SYSTEM REQUIREMENTS
Input DVI-D (digital only) source equipment and output iMac 27” or Apple LED Cinema Display®
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2
SPECIFICATIONS
DVI-D (Digital Only)
Mini DisplayPort
RGS_24
Input Port
Output Port
Color Space
ESD Protection
Human body model: +/- 8kV (air-gap discharge)
+/- 4kV (contact discharge)
Input TMDS signal
Dimensions (mm)
Weight (lb)
1.2 Volts (peak-to-peak)
110 x 90 x 30 / (Inch)4.3’x3.5x1.8
0.5
Chassis Material
Plastic
Silkscreen Color
White
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
2.5W
0oC ~ 40oC / 32oF ~ 104oF
-20oC ~ 60oC / -4oF ~ 140oF
20~90% RH (non-condensing)
PANEL DESCRIPTIONS
1. Front Panel
1. Reset Switch: Push this button to reset the device’s EDID.
The LED will blink red while resetting the EDID. Only need
to be performed if computer is changed.
2. Green LED – Power in ON, Red LED – Power is OFF.
3. MINI DP OUTPUT: Connect it with mini DP cable to Apple
Cinema Display or to iMac 27”.
1
2
3
2. Rear Panel
1. 3.5mm mini stereo audio connection to transfer audio
signal to display.
2. DVI & USB INPUT: DVI/USB 7-inch Pig-Tail. Connect DVI
to the computers DVI output for video signal and USB to
the Computers USB output for power. If there is no empty
USB outputs, Power to USB adapter could be used.
1
2
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
PIN ASSIGNMENT
1. DVI-D connector
DVI-D Receptacle Connector
Digital-Only Connector Pin Assignments
Pin
1
Signal Assignment
Pin
9
Signal Assignment
T.M.D.S Data1-
T.M.D.S Data1+
T.M.D.S. Data1/3 Shield
TMDS Data 3-
Pin
17
18
19
20
21
22
23
24
Signal Assignment
T.M.D.S Data0-
T.M.D.S Data2-
T.M.D.S Data2+
T.M.D.S. Data2/4 Shield
TMDS Data 4-
TMDS Data 4+
DDC Clock
2
10
11
12
13
14
15
16
T.M.D.S Data0+
3
T.M.D.S. Data0/5 Shield
TMDS Data 5-
4
5
TMDS Data 3+
TMDS Data 5+
6
+5V Power
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
7
DDC Data
Ground (for +5)
Hot Plug Detect
8
No Connect
2. Mini DisplayPort Connector
Top Row
Pin Number Signal Type
Bottom Row
Pin Number Signal Type
Pin Name
GND
Pin Name
Hot Plug Detect
CONFIG1
1
3
GND
Out
2
4
In
CONFIG
CONFIG
GND
ML Lane 0 (p)
ML Lane 0 (n)
GND
5
Out
6
CONFIG2
7
GND
Out
8
GND
9
ML Lane 1 (p)
ML Lane 1 (n)
GND
10
12
14
16
18
20
Out
ML Lane 3 (p)
ML Lane 3 (n)
GND
11
13
15
17
19
Out
Out
GND
Out
GND
ML Lane 2 (p)
ML Lane 2 (n)
GND
I/O
AUX CH (p)
AUX CH (n)
DP_PWR
Out
I/O
GND
PWR Out
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4
CONNECTION DIAGRAM
iMac 27” or Apple 24” Cinema Display
AT-DP400
Mini DisplayPort
cable
DVI
USB
cable
cable
k
Mac
Mini
PC
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
TROUBLESHOOTING
Question: My Display/Adapter will fail to “wake up” from sleep mode?
Answer: Press the reset button on the front of the unit. The reset function will reload the EDID and display with the best
resolution image. This is not standard issue; however may happen with older computers.
Question: My Mac works fine; however my PC is not connecting to the monitor though your converter?
Answer: a) We suggest to make sure that you have the following output resolutions selected on your computer: iMac
27” (2560x1440) and Apple 24” LED (1920x1200)
b) Please perform a Bios update to make sure you have the latest version.
Please update your video card and USB drivers to the latest drivers.
c) Press “reset” button on the DP400 to trigger a pull of the EDID from the display to the computer
Question: I want to connect my PS3 to my monitor using your box? Please help.
Answer: We do suggest using AT-HD620 as it is a scaler converter box which will be able to display your HDMI sources
at the highest resolutions up to 2560x1440. However if you do decide to go with DP400, you can use our converter
without additional devices at only 720p. Make sure to set 720p prior connecting it to the DP400. Even Though DP400 is
able to pass-though very high resolutions, the Xbox or PS3 users will only be able to view 720p because iMac 27” doesn’t
accept 1080i or 1080p.
Question: My iSight camera and speakers won’t work when I use your unit.
Answer: The iSight operates through the usb of the 24” LED Display, Please plug in the USB from the monitor to your
computer.
Question: How can I control the brightness on my monitor when using your device?
Answer: The brightness settings can only be adjusted on Apple made computers.
Question: What does the Green Light mean on the DP400?
Answer: The green light indicates that your laptop or desktop is connected to the DP400 and the Monitor correctly. It
also means the unit is powered up successfully through the usb.
Question: What does the Red Light mean on the DP400?
Answer: The Red light can mean that the unit isn’t being powered on correctly. Please re-connect the USB and the DVI
cables.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
Do not modify the wall plug. Doing so will
void the warranty and safety features.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly ap-
proved by the manufacturer, could void the user’s authority to operate this equipment.
Operate this product using only the included external power supply. Use of other power supplies could impair
performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device
and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed on or against
them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and
swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.
Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar
the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so
could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-DP400.
Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or con-
tact Atlona directly.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
7
WARRANTY
Limited Warranty
Atlona Technologies warrants that (a) its products (the AT-DP400) will perform substantially in accordance with
the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product
will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In
the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from
the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the
above limitation may not apply to customers that fall within those areas.
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Tech-
nologies’ decision, either return of the price paid for the product, repair, or replacement of the product that
does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Cus-
tomer’s receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misap-
plication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power out-
age), dropping the product (or items on the product), contact with fluids, and physical misconduct (i.e. kicking
or punching). Any replacement product will be warranted for the remainder of the original warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other
warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability
and fitness for a particular purpose, with regard to the product and any related written materials. This Limited
Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be
liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has
been advised of the possibility of such damages. Such damages include but are not limited to: special, inciden-
tal, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss
of business information, or any other pecuniary loss.
Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to
the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation
of liability for consequential or incidental damage. The above limitations may not apply to you in such jurisdic-
tional cases.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
8
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few
moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll
receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration information
is completely secure. Atlona product registration is completely voluntary and failure to register will not
diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Toll free: 1-877-536-3976
9
Local: 1-408-962-0515
|