Behringer Network Card UCA202 User Manual

Operating Manual  
Version 1.1  
March 2006  
 
U-CONTROL UCA202  
DETAILED SAFETY INSTRUCTIONS:  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
8) Only use attachments/accessories specified by the manufacturer.  
9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
10) CAUTION - These service instructions are for use by qualified service personnel only. To reduce the risk of  
electric shock do not perform any servicing other than that contained in the operation instructions unless you are  
qualified to do so.  
 
3
U-CONTROL UCA202  
U-CONTROL  
V
Ultra low-latency 2 In/2 Out USB/Audio Interface with Digital Output  
Ultra-flexible audio interface connects your instruments, mixer etc. with your computer for recor-  
ding and playback  
V
V
High-resolution 48 kHz converters for high-end audio quality  
Works with your PC or Mac–no setup or drivers required. Free audio recording and editing softwa-  
V
V
V
V
V
Stereo headphone output with dedicated level control lets you monitor both input and output  
Additional S/PDIF optical output for direct digital conversion  
Powered via USB bus–no external power supply needed  
High-quality components and exceptionally rugged construction ensure long life  
Conceived and designed by BEHRINGER Germany  
All Trademarks mentioned belong to their respective owners and are not affiliated with BEHRINGER®  
 
4
U-CONTROL UCA202  
FOREWORD  
Dear Customer,  
welcome to the team of U-CONTROL users, and thank you very much for  
expressing your confidence in us by purchasing the UCA202. It is one of  
my most pleasant tasks to write this letter to you, because it is the culmination  
of many months of hard work delivered by our engineering team to reach a  
very ambitious goal: to develop a first rate unit, which is flexible enough to  
be used mobile as well as within studio setups.  
The task to design our new UCA202 certainly meant a great deal of  
responsibility. You, the discerning user and musician, were the focus of  
our entire development efforts. It also meant a lot of work and night shifts  
to accomplish this goal. But it was fun, too. Developing a product usually  
brings a lot of people together, and what a great feeling it is when every-  
body who participated in such a project can be proud of what we’ve  
achieved.  
It is our philosophy to share our joy with you, because you are the most  
important member of the BEHRINGER family. With your highly competent suggestions for new products  
you’ve greatly contributed to shaping our company and making it successful. In return, we guarantee  
you uncompromising quality as well as excellent technical and audio properties at an extremely favorab-  
le price. All of this will enable you to fully unfold your creativity without being hampered by budget  
constraints.  
We are often asked how we can make it to produce such high-grade devices at such unbelievably low  
prices. The answer is quite simple: it’s you, our customers! Many satisfied customers means large sales  
volumes enabling us to get better conditions of purchase for components, etc. Isn’t it only fair to pass this  
benefit back to you? Because we know that your success is our success, too!  
 
5
U-CONTROL UCA202  
I would like to thank all people whose help on U-CONTROL UCA202 has made it all possible. Everybody  
has made very personal contributions, starting from the designers of the unit via the many staff members  
in our company to you, the user of BEHRINGER products.  
My friends, it’s been worth the trouble!  
Thank you very much,  
Uli Behringer  
 
6
U-CONTROL UCA202  
TABLE OF CONTENTS  
1. INTRODUCTION ........................................................................................... 8  
1.1 Before you started .............................................................................................................. 9  
1.1.1 Shipment ..................................................................................................................... 9  
1.1.2 Initial operation ............................................................................................................ 9  
1.1.3 Online registration .................................................................................................... 10  
2. SYSTEM REQUIREMENTS......................................................................... 11  
2.1 Hardware connection ......................................................................................................... 11  
3. OPERATING ELEMENTSAND CONNECTIONS ......................................... 12  
3.1 Front panel .......................................................................................................................... 12  
3.2 Rear panel .......................................................................................................................... 13  
4. WORKING WITH THE UCA202 .................................................................. 14  
4.1 Application example ............................................................................................................ 14  
5. AUDIO CONNECTIONS .............................................................................. 16  
5.1 Wiring .................................................................................................................................. 16  
5.2 Headphones connection .................................................................................................... 17  
6. SPECIFICATIONS ...................................................................................... 18  
7. WARRANTY ............................................................................................... 20  
 
7
U-CONTROL UCA202  
1. INTRODUCTION  
Welcome to the family of U-CONTROL users and thank you for expressing your confidence in BEHRIN-  
GER products by purchasing the UCA202. With the UCA202 you have purchased a high-performance  
audio interface that includes a USB connector. It is thus an ideal sound card for your laptop computer or  
an essential recording/playback component for studio environments that involve desktop computers.  
The UCA202 is PC and Mac-compatible. Therefore, no separate installation procedure is required, while  
the operating system drivers ensure an extremely short latency. Thanks to its robust construction and  
compact dimensions, the UCA202 is also ideal for traveling. The separate headphones output allows you  
to play back your recordings at any time, even if you don’t happen to have any loudspeakers available.  
2 inputs and outputs as well as the digital stereo output give you total connecting flexibility to mixing  
consoles, loudspeakers or headphones. Power is supplied to the unit via the USB interface. The LED  
gives you a quick check that the UCA202 is properly connected to the computer. The UCA202 is the ideal  
extra for every computer musician.  
 
1. INTRODUCTION  
8
U-CONTROL UCA202  
1.1 Before you started  
1.1.1 Shipment  
Your UCA202 was carefully packed at the assembly plant to assure secure transport. Should the  
condition of the cardboard box suggest that damage may have taken place, please inspect the unit  
immediately and look for physical indications of damage.  
Damaged equipment should NEVER be sent directly to us. Please inform the dealer  
from whom you acquired the unit immediately as well as the transportation com-  
pany from which you took delivery. Otherwise, all claims for replacement/repair may  
be rendered invalid.  
Please always use the original packaging to avoid damage due to storage or ship-  
ping.  
Never let unsupervised children play with the equipment or with its packaging.  
Please dispose of all packaging materials in an environmentally friendly fashion.  
1.1.2 Initial operation  
Please make sure the unit is provided with sufficient ventilation, and never place the UCA202 on top of  
an amplifier or in the vicinity of a heater to avoid the risk of overheating.  
The current supply is made via the USB connecting cable, so that there is no external power supply unit  
required. All required safety precautions have been adhered to.  
 
1. INTRODUCTION  
9
U-CONTROL UCA202  
1.1.3 Online registration  
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting  
warranty carefully.  
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To  
arrange for warranty service, please contact the retailer from whom the equipment was purchased.  
Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our  
subsidiaries. Corresponding contact information is included in the original equipment packaging (Global  
Contact Information/European Contact Information). Should your country not be listed, please contact the  
distributor nearest you. A list of distributors can be found in the support area of our website  
(www.behringer.com/support).  
Registering your purchase and equipment with us helps us process your repair claims quicker and more  
efficiently.  
Thank you for your cooperation!  
 
1. INTRODUCTION  
10  
U-CONTROL UCA202  
2. SYSTEM REQUIREMENTS  
The UCA202 is PC and Mac-compatible. Therefore, no installation procedure or drivers  
are required for the correct functioning of the UCA202.  
To work with the UCA202, your computer must fulfill the following ninimum requirements:  
MAC®  
PC  
Intel® or AMD® CPU, 400 MHz or higher  
G3, 300 MHz or higher  
minimum 128 MB RAM  
USB 1.1 interface  
Windows® XP, 2000  
minimum 128 MB RAM  
USB 1.1 interface  
Mac OS® 9.0.4 or higher, 10.X or higher  
2.1 Hardware connection  
Use the USB connecting cable supplied with the UCA202 to connect the unit to your computer. The USB  
connection also supplies the UCA202 with current. You can connect a variety of devices and equipment  
to the inputs and outputs.  
 
2. SYSTEM REQUIREMENTS  
11  
U-CONTROL UCA202  
3. OPERATING ELEMENTS AND CONNECTIONS  
3.1 Front panel  
1
LED  
2
3
4
Fig. 3.1: Front panel UCA202  
The LED indicates the status of the USB power supply.  
DIGITAL OUTPUT: The Toslink jack carries an S/PDIF signal which can be connected via a fiber  
optic cable, for example, to the digital input of an effects device.  
Use the  
jack to connect a standard pair of headphones equipped with a 1/8" TRS connector.  
 
3. OPERATING ELEMENTSAND CONNECTIONS  
12  
U-CONTROL UCA202  
The VOLUME control adjusts the volume level of the headphones output. Turn the control fully to  
the left before you connect the headphones. This helps you avoid the damage that is caused by  
high volume settings.  
3.2 Rear panel  
5
6
7
Fig. 3.2: back of the UCA202  
Use the LINE-OUT jacks for audio cables with RCA connectors.  
Use the LINE-IN jacks for audio cables with RCA connectors.  
The OFF/ON-MONITOR switch activates the monitor function. In this case the input signal is  
routed directly to the headphones output.  
 
3. OPERATING ELEMENTSAND CONNECTIONS  
13  
U-CONTROL UCA202  
4. WORKING WITH THE UCA202  
4.1 Application example  
Fig. 4.1: Common version with the UCA202  
 
4. WORKING WITH THE UCA202  
14  
U-CONTROL UCA202  
To provide a professional recording interface between mixing console and computer, you can use the  
UCA202 in combination with a suitable mixing console that includes subgroup outputs. This type of setup  
allows you to record several signals in the computer at the same time, to simultaneously play back  
several takes or playbacks which have been recorded, and to listen to the whole recording via loudspea-  
kers (or headphones). Figure 4.1 shows a possible setup with one UCA202.  
Connect the outputs of the subgroup (in this case ALT 3-4 OUT) with the inputs of the UCA202  
. You  
can choose to connect the outputs  
of the interface either to the TAPE INPUT sockets or to your  
monitor speakers. You can connect control headphones to the  
socket  
of the UCA202 or to the  
headphones output of your mixing console. Use the USB cable supplied with the unit to connect your PC  
®
or MAC via the USB interface.  
By routing each channel that you want to record through the ALT3-4 subgroup, you can now use the  
input channels of the mixing console to record different signals (e.g. microphone, guitar, sound module,  
etc.) in the computer. If you connect the OUT jacks of the UCA202 to channel inputs 7/8 (not via TAPE  
INPUT), make sure that the signal is not switched to the subgroup but instead to the main output of your  
mixer (MUTE key on the UB1204FX-PRO in channel 7/8 not pressed). Otherwise feedback can occur.  
Make sure that you use the SOURCE section on the mixing console to select the correct monitoring paths  
(ALT 3-4 and MAIN MIX or ALT 3-4 and TAPE).  
If you lead the UCA202 back via a channel input (not TAPE INPUT), you can also use the aux path in the  
channel to set up a monitor mix for live musicians. To do this, use the Aux Send (e.g. Aux 1) in this  
channel input. If the musicians want to hear themselves as well as the playback or previous recording  
takes, use the Aux Sends in the recording channels to mix in the recording signals with the monitor mix.  
 
4. WORKING WITH THE UCA202  
15  
U-CONTROL UCA202  
5. AUDIO CONNECTIONS  
Although there are various ways to integrate the UCA202 into your studio or live set-up, the audio  
connections to be made will basically be the same in all cases:  
5.1 Wiring  
Please use standard RCA cables to connect the UCA202 to other audio equipment. You can also use an  
adapter cable.  
Fig. 5.1: RCA cable  
 
5. AUDIO CONNECTIONS  
16  
U-CONTROL UCA202  
Fig. 5.2: Adapter cable with 1/4" jack  
5.2 Headphones connection  
The UCA202 is provided with a headphones jack. Here, you can connect any standard pair of stereo  
headphones with a 1/8" TRS connector.  
 
5. AUDIO CONNECTIONS  
17  
U-CONTROL UCA202  
6. SPECIFICATIONS  
LINE IN  
Connectors  
Input impedance  
Max. input level  
RCA, unbalanced  
approx. 27 k  
2 dBV  
LINE OUT  
Connectors  
Output impedance  
Max. output level  
RCA, unbalanced  
approx. 400 Ω  
2 dBV  
DIGITAL OUTPUT  
Socket  
Output format  
Toslink, optical cable  
S/PDIF  
PHONES OUT  
Socket  
Output impedance  
Max. output pegel  
1/8" TRS stereo jack  
approx. 50 Ω  
-2 dBu, 2 x 3,7 mW @ 100 Ω  
USB 1.1  
Connectors  
type A  
 
6. SPECIFICATIONS  
18  
U-CONTROL UCA202  
DIGITAL PROCESSING  
Converter  
16-bit converter  
Sample rate  
32.0 kHz, 44.1 kHz, 48.0 kHz  
SYSTEM DATA  
Frequency response  
10 Hz to 20 kHz, ± 1 dB @ 44.1 kHz sample rate  
10 Hz to 22 kHz, ± 1 dB @ 48.0 kHz sample rate  
0.05 % typ. @ -10 dBV, 1kHz  
THD  
Crosstalk  
-77 dB @ 0 dBV, 1 kHz  
Signal-to-noise ratio  
A/D 89 dB typ. @ 1 kHz, A-weighted  
D/A 96 dB typ. @ 1 kHz, A-weighted  
POWER SUPPLY  
USB connection  
5 V  
, 100 mA max.  
DIMENSIONS/WEIGHT  
Dimensions (H x W x D)  
Weight  
approx. 22 mm (0.87") x 88 mm (3.46") x 60 mm (2.36")  
approx. 0.12 kg  
BEHRINGER always takes great care to ensure the highest standard of quality. Any modifications which may be  
necessary will be made without prior notification. Technical data and appearance of the equipment can therefore differ  
from the details or illustrations shown.  
 
6. SPECIFICATIONS  
19  
U-CONTROL UCA202  
7. WARRANTY  
§ 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW  
1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such  
rights against the seller that arise from a legally effective purchase contract.  
2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty  
law.  
§ 2 ONLINE REGISTRATION  
Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently.  
Thank you for your cooperation!  
§ 3 WARRANTY  
1. BEHRINGER (BEHRINGER International GmbH including all BEHRINGER subsidiaries listed on the enclosed page,  
except BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of defects  
in material and workmanship for a period of one (1) year* from the original date of purchase, in accordance with the  
warranty regulations described below. If the product shows any defects within the specified warranty period that are not  
excluded from this warranty as described under § 5, BEHRINGER shall, at its discretion, either replace or repair the  
product using suitable new or reconditioned parts. In the case that other parts are used which constitute an improvement,  
BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts.  
2. If the warranty claim proves to be justified, the product will be returned to the user freight prepaid.  
3. Warranty claims other than those indicated above are expressly excluded.  
§ 4 RETURN AUTHORIZATION NUMBER  
1. To obtain warranty service, the buyer (or his authorized dealer) must call BEHRINGER (see enclosed list) during  
normal business hours BEFORE returning the product. All inquiries must be accompanied by a description of the  
problem. BEHRINGER will then issue a return authorization number.  
 
7. WARRANTY  
20  
U-CONTROL UCA202  
2. Subsequently, the product must be returned in its original shipping carton, together with the return authorization number  
to the address indicated by BEHRINGER.  
3. Shipments without freight prepaid will not be accepted.  
§ 5 WARRANTY REGULATIONS  
1. Warranty services will be furnished only if the product is accompanied by a copy of the original retail dealer’s invoice.  
Any product deemed eligible for repair or replacement under the terms of this warranty will be repaired or replaced.  
2. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a  
national or local level, in any country which is not the country for which the product was originally developed and  
manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. The warranty  
does not cover any such modification/adaptation, irrespective of whether it was carried out properly or not. Under the  
terms of this warranty, BEHRINGER shall not be held responsible for any cost resulting from such a modification/  
adaptation.  
3. Free inspections and maintenance/repair work are expressly excluded from this warranty, in particular, if caused by  
improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular,  
of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts.  
4. Damages/defects caused by the following conditions are not covered by this warranty:  
V
V
V
improper handling, neglect or failure to operate the unit in compliance with the instructions given in  
BEHRINGER user or service manuals.  
connection or operation of the unit in any way that does not comply with the technical or safety regulations  
applicable in the country where the product is used.  
damages/defects caused by force majeure or any other condition that is beyond the control of  
BEHRINGER.  
5. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty.  
6. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the  
inspection costs are payable by the customer.  
 
7. WARRANTY  
21  
U-CONTROL UCA202  
7. Products which do not meet the terms of this warranty will be repaired exclusively at the buyer’s expense.  
BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within  
6 weeks after notification, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing. Such  
costs will also be invoiced separately when the buyer has sent in a written repair order.  
§ 6 WARRANTY TRANSFERABILITY  
This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not transferable to anyone  
who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty  
promise on behalf of BEHRINGER.  
§ 7 CLAIM FOR DAMAGES  
Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages.  
In no event shall the liability of BEHRINGER exceed the invoiced value of the product.  
* Customers in the European Union please contact BEHRINGER Germany Support for further details.  
FireWire® is a trademark of Apple Computer Inc. registered in the U.S. and other countries.  
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names  
of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Mac  
and the Mac Logo are trademarks of Apple Computer, Inc, registered in the US and other countries. Their use neither constitutes a claim of the trademarks  
by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by  
any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly  
from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely no  
authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any  
form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission  
of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.  
ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH,  
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.  
Tel. +49 2154 9206 0, Fax +49 2154 9206 49032.  
 
7. WARRANTY  
22  

ACR Electronics Marine GPS System RLB 36 User Manual
Actron Computer Drive CP9180 User Manual
Alesis MP3 Player i04 User Manual
Alpine Universal Remote RUE 4190 User Manual
American Standard Plumbing Product USA13 User Manual
AOSafety Respiratory Product Respirator Fit Testing Kits and Accessories User Manual
Audiovox Stereo System AV 428V User Manual
Avital Remote Starter 4108L User Manual
Behringer Indoor Furnishings LD6230 User Manual
Beko Refrigerator CF540B User Manual