User’s manual
Version 1.0 April 2006
EUROLIVE B212A/B215A
EUROLIVE
Processor-Controlled 450-Watt 2-Way PA Speaker System with 12"/15" Woofer and
1.25" Titanium Compression Driver
V
V
V
V
V
V
V
V
V
V
High-power 450-Watt 2-Way PA sound reinforcement speaker system for live and playback applications
Ultra-compact lightweight system delivers excellent sound even at extreme sound pressure levels
Integrated sound processor for ultimate system control and speaker protection
Extremely powerful 12''/15" long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.25'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential/conical horn
Ultra low-noise Mic/Line Input with Volume control and CLIP LED
Dedicated 2-band EQ for perfect sound adjustment
Additional Line Out connector allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
V
V
V
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
3
EUROLIVE B212A/B215A
FOREWORD
TABLE OF CONTENTS
1. INTRODUCTION ......................................................... 4
Dear customer,
1.1 Before you get started ................................................... 4
1.1.1 Shipment ............................................................... 4
1.1.2 Initial operation...................................................... 4
1.1.3 Online registration ................................................ 5
welcome to the team of
EUROLIVE users, and thank
you very much for
expressing your confidence
in us by purchasing these
PA loudspeakers.
2. CONTROL ELEMENTS AND CONNECTIONS ............. 5
3. APPLICATION EXAMPLES......................................... 6
Writing this foreword for
you gives me great
pleasure, because it
represents the culmination
of many months of hard
work delivered by our
engineering team to
achieve a very ambitious
goal: to develop an
outstanding PA system that
3.1 Using a mixing console ................................................... 6
3.2 Using several B212A/B215A loudspeakers .................. 6
3.3 Direct connection of a stereo signal source ................. 6
4. INSTALLATION ........................................................... 6
5. SPECIFICATIONS ....................................................... 7
6. WARRANTY ................................................................ 8
offers
a
maximum in
flexibility and performance
through its impressive sound character and outstanding features.
The task of designing our new B212A/B215A certainly meant a
great deal of responsibility, which we assumed by focusing on
you, the discerning user and musician. Meeting your expectations
also meant a lot of work and night shifts. But it was fun, too.
Developing a product usually brings a lot of people together, and
what a great feeling it is when all who participated in such a
project can be proud of what they’ve achieved.
1. INTRODUCTION
Thank you very much for expressing your confidence in BEHRINGER
products by purchasing the EUROLIVE B212A/B215A. This active
and extremely compact loudspeaker has been designed specifically
for those applications in which space is a problem. The compact
dimensions and the low weight, despite the high-performance power
amp, as well as the option to mount the loudspeaker on a wall give
this product maximum flexibility. The input section accepts both line-
level or microphone-level sources. Additionally, the loudspeaker
has a 2-band equalizer for accurate high and low-frequency control.
All of these features make this loudspeaker a high-quality and highly
reliable companion on the road.
It is our philosophy to share our enjoyment with you, because
you are the most important member of the BEHRINGER team.
With your highly competent suggestions for new products you’ve
made a significant contribution to shaping our company and making
it successful. In return, we guarantee you uncompromising quality
as well as excellent technical and audio properties at an extremely
reasonable price. All of this will enable you to give free rein to
your creativity without being hampered by budget constraints.
1.1 Before you get started
1.1.1 Shipment
We are often asked how we manage to produce such high-
quality devices at such unbelievably low prices. The answer is
quite simple: it’s you, our customers! Many satisfied customers
mean large sales volumes enabling us to get better purchasing
terms for components, etc. Isn’t it only fair to pass this benefit on
to you? Because we know that your success is our success too!
Your B212A/B215A was carefully packed at the assembly plant
to assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of damage.
ꢀ
Damaged equipment should NEVER be sent directly
to us. Please inform the dealer from whom you
acquired the unit immediately as well as the
transportation company from which you took
delivery. Otherwise, all claims for replacement/
repair may be rendered invalid.
I would like to thank all of you who have made the B212A/B215A
possible. You have all made your own personal contributions,
from the developers to the many other employees at this company,
and to you, the BEHRINGER user.
My friends, it’s been worth the effort!
ꢀ
ꢀ
ꢀ
Please always use the original packaging to avoid
damage due to storage or shipping.
Never let unsupervised children play with the
B212A/B215A or with its packaging.
Thank you very much,
Please dispose of all packaging materials in an
environmentally friendly fashion.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling.
To avoid overheating, do not place the B212A/B215A on top of
power amps or near radiators, etc.
Uli Behringer
ꢀ
Blown fuses must be replaced by fuses of the
same type and rating. Please refer to the
“SPECIFICATIONS” for further details.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all international safety
certification requirements.
4
1. INTRODUCTION
EUROLIVE B212A/B215A
ꢀ
Please make sure that all equipment is properly
grounded at all times. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cord.
The LINK OUTPUT is directly connected to the inputs of the
B212A/B215A and carries the input signal with no processing
applied. In this way, you can route the signal to the input of
another device (for example, a second B212A/B215A).
To set the volume of the LINE or MIC signal, use the LEVEL
control. The left half of the control range is for attenuating
the LINE signal. The right half is for raising the level of the
MIC signal.
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment
conditions of our warranty carefully.
The CLIP LED lights up when signal distortion occurs. Reduce
the volume with the LEVEL control until the CLIP LED does
not light up any more, or occasionally lights up at signal
peaks.
Should your BEHRINGER product malfunction, our goal is to have it
repaired as quickly as possible. To arrange for warranty service,
please contact the retailer from whom the equipment was purchased.
Should your BEHRINGER dealer not be located in your vicinity, you
may directly contact one of our subsidiaries. Corresponding contact
information is included in the original equipment packaging (Global
Contact Information/European Contact Information). Should your
country not be listed, please contact the distributor nearest you. A
list of distributors can be found in the support area of our website
(www.behringer.com/support).
ꢀ
We would like to draw your attention to the fact that
extremely loud sound levels may damage your
hearing as well as your headphones/loudspeakers.
Turn the LEVEL control fully to the left before you
switch on the unit. Be careful to select a suitable
volume at all times.
The HIGH control adjusts the high-frequency range.
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Use the LOW control to raise the level of the low-frequency
range.
Thank you for your cooperation!
The PWR LED lights up when the loudspeaker is put into
operation.
ATTENTION!
ꢀ
This loudspeaker is capable of producing extreme
volumes. Please keep in mind that high sound
pressures do not only temporarily damage your
sense of hearing, but can also cause permanent
hearing damage. Be careful to select a suitable
volume at all times.
2. CONTROL ELEMENTS AND
CONNECTIONS
Fig. 2.2: Control elements and connections
(B212A and B215A)
You can replace fuses at the FUSE SWITCH of the B212A/
B215A. Always replace fuses with the same type. Please
follow the instructions given in chapter 5 “SPECIFICATIONS.”
The mains connection is established using a cable with an IEC
mains connector. This cable is delivered with the B212A/
B215A. To avoid ground-loop hum, loudspeakers and mixing
consoles should be connected to the same power circuit.
POWER
Press POWER to turn on your B212A/B215A.
Fig. 2.1: Control elements and connections (B212A and B215A)
ꢀ
Attention: The POWER switch does not fully
disconnect the unit from the mains. To disconnect
the unit from the mains, pull out the main cable plug
or appliance coupler. When installing the product,
ensure the plug or appliance coupler is readily
operable. Unplug the power cord completely when
the unit is not used for prolonged periods of time.
Use this 1/4" stereo jack to connect a signal source that
has 1/4" output.
Use this XLR connector to connect a signal source that
has XLR output.
ꢀ
Always use either the XLR or the 1/4" jack input,
and use the LEVEL control to adapt the input
sensitivity. Never use both inputs at the same time!
SERIAL NUMBER
5
2. CONTROLELEMENTSAND CONNECTIONS
EUROLIVE B212A/B215A
3. APPLICATION EXAMPLES
4. INSTALLATION
Both audio inputs of the BEHRINGER B212A/B215A and the LINK
OUTPUT connector are fully balanced. To maximize interference
compensation, try to establish balanced connections to other
equipment, whenever possible.
ꢀ
Turn the LEVEL control fully to the left before you
switch on the unit with the POWER switch. Then,
raise the volume to a suitable level.
3.1 Using a mixing console
A common way to use 2 B212A/B215A loudspeakers is with a
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B212A/B215A loudspeaker.
The B212A/B215A includes XLR and 1/4" connectors. To avoid
interference, use only XLR or 1/4" jack cables.
3.2 Using several B212A/B215A loudspeakers
Fig. 4.1: 1/4" TRS connector
Fig. 4.2: XLR connector
ꢀ
Make sure that only competent people install your
B212A/B215A. They must be sufficiently earthed
during and after the installation process. Otherwise,
electrostatic discharges may negatively affect the
operating characteristics of your equipment.
Fig. 3.1: Wiring several B212A/B215A loudspeakers using
the LINK OUTPUT connector
For larger rooms, you can connect several B212A/B215A
speakers using the LINK OUTPUT connector
(see fig. 3.1).
3.3 Direct connection of a stereo signal source
When you use two B212A/B215A loudspeakers, you can directly
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
6
4. INSTALLATION
EUROLIVE B212A/B215A
5. SPECIFICATIONS
B212A
B215A
SPEAKERS
High-performance woofer
Diameter
12" (308 mm)
95 dB (Full Space)
8 Ω
15" (387 mm)
Sensitivity (1 W @ 1 m)
Impedance
96 dB (Full Space)
8 Ω
Power rating (peak program)
800 W
800 W
Tweeter compression driver
Diameter
1.25" (34 mm)
1.25" (34 mm)
105 dB (Full Space)
8 Ω
Sensitivity (1 W @ 1 m)
Impedance
105 dB (Full Space)
8 Ω
Power rating (peak program)
AMPLIFIER
60 W/2 kHz @ 12 dB/oct
60 W/2 kHz @ 12 dB/oct
Low-frequency amplifier
Power (peak program)
400 W @ 8 Ω/0.1% THD
400 W @ 8 Ω/0.1% THD
High-frequency amplifier
Power (peak program)
50 W @ 8 Ω/0.1% THD
50 W @ 8 Ω/0.1% THD
Limiter
opto-controlled
opto-controlled
INPUT
XLR connector
Sensitivity
(servo-balanced)
-40dB to +4 dB
(servo-balanced)
-40dB to +4 dB
20 kΩ
(servo-balanced)
-40dB to +4 dB
(servo-balanced)
-40dB to +4 dB
20 kΩ
1/4" jack
Sensitivity
Input resistance
LINK OUTPUT
XLR connector
SYSTEM DATA
Frequency range
Crossover frequency
Maximum sound pressure level
EQUALIZER
HIGH
65 Hz to 20 kHz
2.4 kHz (12 dB)
125 dB @ 1 m
55 Hz to 20 kHz
1.9 kHz (12 dB)
126 dB @ 1 m
12 kHz/± 15 dB
80 Hz/± 15 dB
12 kHz/± 15 dB
80 Hz/± 15 dB
LOW
POWER SUPPLY
Mains voltage
USA/Canada
China/Korea
120 V~, 60 Hz
220 V~, 50 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
120/230 V~, 50 - 60 Hz
General export model
Power consumption
Fuse
300 W max.
100 - 120 V~: T 5,0 A H 250 V
220 - 240 V~: T 2,5 A H 250 V
Standard IEC receptacle
Mains connector
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
approx. 550 mm x 345 mm x 270 mm approx. 690 mm x 440 mm x 335 mm
(approx. 22" x 14" x 11")
(approx. 27" x 17" x 13")
Weight
approx. 16.5 kg (approx. 36 lbs.)
approx. 23 kg (approx. 51 lbs.)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.
7
5. SPECIFICATIONS
EUROLIVE B212A/B215A
2. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national
or local level, in any country which is not the country for which
the product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any
such modification/adaptation, irrespective of whether it was
carried out properly or not. Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting
from such a modification/adaptation.
6. WARRANTY
§ 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyer’s statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contract.
2. The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty law.
3. Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the user. This also applies to defects
caused by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, tubes, guitar strings,
illuminants and similar parts.
§ 2 ONLINE REGISTRATION
Please do remember to register your new BEHRINGER equipment
conditions of our warranty carefully.
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
4. Damages/defects caused by the following conditions are not
covered by this warranty:
Thank you for your cooperation!
V
improper handling, neglect or failure to operate the unit in
compliance with the instructions given in BEHRINGER user
or service manuals.
§ 3 WARRANTY
1. BEHRINGER (BEHRINGER International GmbH including all
BEHRINGER subsidiaries listed on the enclosed page, except
BEHRINGER Japan) warrants the mechanical and electronic
components of this product to be free of defects in material and
workmanship for a period of one (1) year* from the original date
of purchase, in accordance with the warranty regulations
described below. If the product shows any defects within the
specified warranty period that are not excluded from this
warranty as described under § 5, BEHRINGER shall, at its
discretion, either replace or repair the product using suitable
new or reconditioned parts. In the case that other parts are used
which constitute an improvement, BEHRINGER may, at its
discretion, charge the customer for the additional cost of these
parts.
V
V
connection or operation of the unit in any way that does
not comply with the technical or safety regulations
applicable in the country where the product is used.
damages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warranty.
6. If an inspection of the product by BEHRINGER shows that the
defect in question is not covered by the warranty, the inspection
costs are payable by the customer.
7. Products which do not meet the terms of this warranty will be
repaired exclusively at the buyer’s expense. BEHRINGER will
inform the buyer of any such circumstance. If the buyer fails to
submit a written repair order within 6 weeks after notification,
BEHRINGER will return the unit C.O.D. with a separate invoice
for freight and packing. Such costs will also be invoiced
separately when the buyer has sent in a written repair order.
2. If the warranty claim proves to be justified, the product will be
returned to the user freight prepaid.
3. Warranty claims other than those indicated above are expressly
excluded.
§ 4 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized dealer)
must call BEHRINGER (see enclosed list) during normal business
hours BEFORE returning the product. All inquiries must be
accompanied by a description of the problem. BEHRINGER will
then issue a return authorization number.
§ 6 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer
(customer of retail dealer) and is not transferable to anyone
who may subsequently purchase this product. No other person
(retail dealer, etc.) shall be entitled to give any warranty promise
on behalf of BEHRINGER.
2. Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by BEHRINGER.
§ 7 CLAIM FOR DAMAGES
Failure of BEHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damages. In no
event shall the liability of BEHRINGER exceed the invoiced value
of the product.
3. Shipments without freight prepaid will not be accepted.
§ 5 WARRANTY REGULATIONS
1. Warranty services will be furnished only if the product is
accompanied by a copy of the original retail dealer’s invoice.
Any product deemed eligible for repair or replacement under the
terms of this warranty will be repaired or replaced.
* Customers in the European Union please contact BEHRINGER
Germany Support for further details.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of
printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks
of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark
owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly
or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product.
Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely no
authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose,
without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALLRIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
8
6. WARRANTY
|