Dryer
DCU 8330 GX
Important safety information
1
This section includes safety information
that will help protection from risks of
personal injuries or materialistic damages.
Failure to follow these instructions
shall cause any warranty and reliability
commitment to become void.
• Do not use extension cords, multi-plugs
or adaptors to connect the dryer to
power supply in order to decrease the
risk of electric shock.
• Do not make any changes on the plug
supplied with the product. If it is not
compatible with the socket, have a
qualified electrician change the socket
with a suitable one.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should
not be dried in the product since they
emit flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry unwashed items in the dryer.
• Items soiled with cooking oils,
acetone, alcohol, fuel oil, kerosene,
stain remover, turpentine, paraffin and
paraffin removers must be washed
in hot water with plenty of detergent
before being dried in the dryer.
General safety
• Never place the machine on a carpet-
covered floor, otherwise, lack of airflow
beneath the machine may cause
electrical parts to overheat. This will
cause problems with your machine.
• If the power cable or mains plug is
damaged, you must call Authorised
Service Agent for repair.
• The product should not be plugged
in during installation, maintenance
and repair works. Such works should
always be made by the technical
service. Manufacturer shall not be held
responsible for damages arising from
processes carried out by unauthorised
persons.
• Connect the product to a grounded
outlet protected by a fuse of suitable
capacity as stated in the technical
specifications table.
• Operate your product at temperatures
between +5°C and +35°C.
• Do not use electrical devices in the
product.
• Do not connect the air exit of the
product to the chimney holes which
are used for the exhaust fumes of the
devices operating with gas or other
types of fuel.
• Garments or pillows bolstered with
rubber foam (latex foam), shower
bonnets, water resistant textiles,
materials with rubber reinforcement and
rubber foam pads should not be dried
in the dryer.
• Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers of
the fabric softener or the product.
• Oil-affected items can ignite
spontaneously, especially when
• You must provide enough ventilation
in order to prevent gases exiting from
devices operating with other types of
fuels including the naked flame from
accumulating in the room due to the
back fire effect.
exposed to heat sources such as in
a tumble dryer. The items become
warm, causing an oxidation reaction
in the oil. Oxidation creates heat. If the
heat cannot escape, the items can
become hot enough to catch fire. Piling,
stacking or storing oil-affected items
can prevent heat from escaping and so
create a fire hazard.
• Always clean the lint filter before or after
each loading.
• Never operate your dryer without the
lint filter installed.
• If it is unavoidable that fabrics that
contain vegetable or cooking oil or
have been contaminated by hair care
products be placed in a tumble dryer
they should first be washed in hot water
• Do not allow fibre, dust and dirt
accumulation around the exhaust exit
and at adjacent areas.
• Power cable plug must be within easy
reach after installation.
3 EN
with extra detergent - this will reduce,
but not eliminate, the hazard.
by following the information given in the
safety instructions:
• This product must be grounded.
Grounding installation decreases the
Turn off the machine, turn off and
contact an authorised service agent.
risk of electric shock by opening a path • Do not stop the dryer before the drying
with low resistance for the electricity
flow in case of a malfunction or failure.
Power cable of this product is equipped
with a conductor and a grounding
plug that allows for grounding the
product. This plug must be installed
appropriately and inserted into a socket
which is grounded in accordance with
the local laws and regulations.
cycle comes to an end unless you will
remove all laundry from the dryer fast
in order to lay them and dissipate the
heat.
• Remove the door of the drying
compartment before decommissioning
or disposing of the product.
• The final step of the drying cycle (cool-
down cycle) occurs without applying
heat to ensure that the items are left
at a temperature that will not damage
them.
• Fabric softeners or similar products
should be used as specified by the
fabric softener instructions.
• Underwear that contains metal
reinforcements should not be placed in
a dryer. Damage to the dryer can result
if metal reinforcements come loose
during drying.
• Do not install the product behind a door
with a lock, sliding door or a door that
has a hinge against the hinge of the
dryer.
• Do not install or leave this product
in places where it will be exposed to
outdoor conditions.
• Do not tamper with the controls.
• Do not perform any repair or part
replacing procedures on the product
even if you know or have the ability to
perform unless it is clearly suggested
in the operating instructions or the
published service manual.
• Inside and exhaust duct of the product
must be cleaned by the qualified
service personnel periodically.
• Wrong connection of grounding
conductor of the product can cause
electric shock. If you have any suspect
about the grounding connection, have
it checked by a qualified electrician,
service representative or service
personnel.
• Do not reach into the machine when
the drum is spinning.
• Unplug the machine when it is not in
use.
• Never wash down the appliance with
water! There is the risk of electric shock!
Always disconnect by unplugging from
the mains before cleaning.
• Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out by grabbing the plug
only. Do not operate the machine if the
power cable or plug is damaged!
• Never attempt to repair the machine
yourself, otherwise, you will be putting
your life and others’ lives in danger.
• For malfunctions that cannot be solved
• Check all garments for forgotten
lighters, coins, metal pieces, needles,
etc. before loading.
• Remove all objects from pockets such
as lighters and matches.
• At times when your dryer is not in
use or after the laundry is taken out
following the completion of drying
process, turn off by using the On/
Off button. In cases when the On/
Off button is on (while the dryer is
energized), keep the door of the dryer
closed.
Intended use
• This product has been designed for
domestic use. It should not be used for
other purposes.
• Use the product only for drying laundry
that are marked accordingly.
• Dry only those articles in your product
that are stated in this manual.
• This product is not intended to be
used by persons with physical, sensory
or mental disorders or unlearned
or inexperienced people (including
children) unless they are attended by
a person who will be responsible for
their safety or who will instruct them
accordingly for use of the product.
Download from Www.Somanuals.c4om.EANll Manuals Search And Download.
Children’s safety
• Electrical appliances are dangerous for
the children. Keep children away from
the machine when it is operating. Do
not let them tamper with the machine.
• Packaging materials are dangerous to
children. Keep the packaging materials
out of reach of children or dispose
them by classifying according to waste
directives.
• Do not allow children sit/climb on or
enter in the product.
• Children should be supervised to
ensure that they do not play with the
product.
• Close the loading door when you leave
the area where the product is located.
5 EN
2 Installation
Refer to the nearest Authorised Service
Agent for installation of your product.
C Preparation of location and electrical
installation for the product is under
customer’s responsibility.
BInstallation and electrical connections
must be carried out by a qualified
personnel.
A Prior to installation, visually check if the
product has any defects on it. If so, do
not have it installed. Damaged products
will cause risks for your safety.
Appropriate installation location
• Install the product in an environment
which has no risk of freezing and is in a
stable and level position.
A Make sure that you have removed
the transportation safety assembly
(nylon+styrofoam pieces) before using
the product for the first time. Do not
leave any items inside the drum.
• Operate your product in a well
ventilated, dust-free environment.
• Do not block the air ducts in front of
and under the product with materials
such as long pile rugs and wooden
bands.
Under counter installation
• A special part (Part no. 297 360 0100)
replacing the top trim must be provided
and installed by the Authorised Service
Agent in order to use the machine under
a counter or in a cupboard. It should
never be operated without the top trim.
• Leave at least 3 cm of space between
the side and rear walls of the product
and the walls of the counter/cupboard
when installing your product under a
counter or in a cupboard.
Mounting over a washing machine
• A fitting device should be used between
the two machines when installing above
a washing machine. The bracket (Part
no. 297 720 0100 white/297 720 0400
grey) must be installed by the Authorised
Service Agent.
• Do not place your product on a long
pile rug or on similar surfaces.
• Do not install the product behind a door
with a lock, sliding door or a hinged
door which can strike the product.
• Once the product is installed, it should
stay at the same place where its
connections have been made. When
installing the product, make sure
that the rear wall of it does not touch
anywhere (tap, socket, etc.) and also
pay attention to install the product at a
place where it will stay permanently.
BDo not place the product on top of the
power cable.
• Keep at least 1.5 cm distance to walls
of other furniture.
• Place the product on a firm floor. If
it will be placed on top of a washing
machine, the approximate weight of
both machines may reach 180 kg when
they are full. Therefore, the floor must be
capable of carrying the load on it!
Removing the transportation
safety assembly
ARemove the transportation safety
assembly before using the product for
the first time.
Connection to water drain;
1. Open the loading door.
In products equipped with a condenser unit
the water accumulated during the drying
cycle is collected in the water tank. You
should drain the accumulated water after
each drying cycle.
2. There is a nylon bag inside the drum
that contains a piece of styrofoam. Hold
it from its section marked with XX.
3. Pull the nylon towards yourself and
remove the transportation safety
assembly.
You can directly send the accumulated
water out through the water drain hose
supplied with the machine instead of
Download from Www.Somanuals.c6om.EANll Manuals Search And Download.
periodically draining the water collected in CNever unscrew the adjustable feet from
the water tank.
Connecting the water drain hose;
their housings.
Electrical connection
Connect the machine to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
Our company shall not be liable for any
damages that will arise when the machine
is used on a circuit without grounding.
• Connection must comply with national
regulations.
• If the current value of the fuse or
breaker in the house is less than 10
Amps, have a qualified electrician install
a 10 Amp fuse.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or
breaker protection are specified in the
“Technical Specifications” section.
• The specified voltage must be equal to
your mains voltage.
1. Remove the hose on the machine by
pulling it out from its end. Do not use
any tools to take out the hose.
• Do not make connections via extension
cables or multi-plugs.
2. Connect the special drain hose supplied
with the machine to the pipe fitting.
3. The other end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The fitting
must always be secured in all types of
connections. Your house may be flooded
if the hose gets out of its housing during
water discharge.
• The main fuse and switches must have
a contact distance of minimum 3 mm.
BDamaged power cable must only be
replaced by a qualified electrician.
BIf the product is faulty, it must not be
operated unless it is repaired! There is
the risk of electric shock!
First use
Important:
• To have the product ready for operation
before calling the authorised service
agent, make sure that its location
and power supply installations are
appropriate. If they are not, call a
qualified electrician to have any
necessary arrangements carried out.
• Make sure that the power connections
of the product are in accordance
with the instructions given in relevant
chapters of this manual.
• The hose should be attached to a height
of maximum 80 cm.
• You must be careful not the pinch or
bend the hose.
• The end of the hose should not be bent,
it should not be stepped on and it must
not be folded between the drain and the
machine.
Adjusting the feet
In order to ensure that your machine
operates more silently and vibration-free, it
must stand level and balanced on its feet.
Balance the machine by adjusting the feet.
Rotate the feet to adjust until the machine
stands level and firmly.
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place out of reach of children.
Packaging materials of your product are
manufactured from recyclable materials.
Sort and dispose of them in accordance
with recycled waste instructions. Do not
dispose of them with normal domestic
waste.
7 EN
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
chimney connections.
3. Drain water remained in the machine
completely before transportation.
Disposing of the old machine
Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your machine.
Before disposing of your old machine,
cut off the power cable plug and make
the loading door lock unusable to avoid
dangerous conditions to children.
Technical specification
EN
2
Height (adjustable)
Width
84.6 cm
59.5 cm
59.8 cm
8 kg
Depth
Capacity (max.)
Weight (net)
40,5 kg
Voltage
Rated power input
Model code
See type label
Type label is located behind the loading door.
Download from Www.Somanuals.c8om.EANll Manuals Search And Download.
3 Initial preparations for drying
programme.
Things to be done for energy
saving:
• Make sure that you operate the product
at its full capacity but pay attention to
not exceeding it.
A B C D
Low
• Spin your laundry at the highest speed
possible when washing them. Thus,
the drying time is shortened and energy
consumption is decreased.
l n m
o p q
• Pay attention to dry same types of
laundry together.
• Follow the instructions in the user
manual for programme selection.
• Make sure that sufficient clearance
is provided at the front and rear side
of the dryer for air circulation. Do not
block the grill at the front side of the
product.
• Do not open the door of the machine
during drying unless necessary. If you
must certainly open the door, pay
attention not to keep it open for a long
time.
Laundry unsuitable for drying in
the machine
• Laundry items with metal attachments
such as belt buckles and metal buttons
can damage your dryer.
• Do not add new (wet) laundry during
drying.
• Lint and fibres released from the
laundry to the air during the drying
cycle are collected in the “Lint Filter”.
Make sure that you clean the filters
before or after each drying.
• In models with condenser, make sure
that you clean the condenser regularly
at least once every month or after every
30 drying cycles.
• In vented models, follow the chimney
connection rules in the user manual
and pay attention to the chimney
cleaning.
• Ventilate the room, where the dryer is
located, well during drying.
• Do not dry items such as woollens, silk
garments and nylon stockings, delicate
embroidered fabrics, laundry with metal
accessories and items such as sleeping
bags in the dryer.
• Laundry made of delicate and valuable
fabrics as well as lace curtains can be
creased. Do not dry them in the dryer!
• Do not dry items made of hermetic
fibres such as pillows and quilts in the
dryer.
• Laundry made of foam or rubber will be
deformed.
• Do not dry laundry containing rubber in
the dryer.
• Do not dry laundry exposed to
petroleum, oil, combustible or explosive
agents in the dryer even if they are
washed beforehand.
• Overly wet laundry or laundry with
dripping water must not be put into the
dryer.
• For power saving in models with lamps,
at times when your dryer is not in
use, keep the door closed if the On/
Off button is pressed (if the dryer is
energized).
Laundry suitable for drying in the
machine
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should
C Always follow the suggestions on the
laundry labels. Dry only the laundry
having a label stating that they are
suitable for drying in a dryer and make
sure that you select the appropriate
9 EN
not be dried in the product since they
emit flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry your unwashed laundry in the
dryer.
Correct load capacity
• Items soiled with cooking oils, acetone,
alcohol, fuel oil, kerosene, stain remover,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty
of detergent before being dried in the
dryer.
• Garments or pillows bolstered with
rubber foam (latex foam), shower
bonnets, water resistant textiles,
materials with rubber reinforcement and
rubber foam pads should not be dried in
the dryer.
• Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers of
the fabric softener or the product.
• Do not dry the underwear reinforced with
metal parts in the dryer. If these metal
reinforcements loosen and break during
drying, they will damage your dryer.
Preparing laundry for drying
• Check all laundry items before loading
them into the product to make sure that
there are no lighters, coins, metal items,
needles and etc. in their pockets or on
any part of them.
A Consider the information in the
"Programme Selection Table". Always
start the programme in accordance
with the maximum load capacity.
C Adding laundry to the machine more
than the level shown in the figure is not
recommended. Drying performance
will degrade when the machine is
overloaded. Furthermore, your dryer
and your laundry can be damaged.
C Place your laundry into the drum
loosely so that they will not get tangled.
CLarge pieces (E.g.: bed sheets, quilt
covers, large tablecloths) may bunch-
up. Stop the dryer 1-2 times during
drying process to separate bunched-
up laundry.
• Fabric softeners and similar products
must be used in accordance with the
instructions of the manufacturer of the
relevant products.
• All laundry must be spun at the highest
spin speed that your washing machine
allows for the laundry type.
• Laundry may be tangled after washing.
Separate your laundry before placing
them into your dryer.
• Sort your laundry according to their types
and thicknesses. Dry the same type of
laundry together. E.g.: fine kitchen towels
and table cloths dry faster than the thick
bath towels.
Download from Www.Somanuals1.c0om.EANll Manuals Search And Download.
Following weights are given as examples.
Loading the laundry
1. Open the loading door.
2. Place the laundry in the machine
without compressing.
Approximate
Home articles
weights (g)
Cotton quit covers
(double)
3. Push the loading door to close.
A Ensure that no items are caught in the
door.
1500
Cotton quit covers (single) 1000
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Small tablecloths
Tea napkins
500
350
700
250
100
700
350
Bath towels
Hand towels
Approximate
weights (g)
Garments
Blouses
Cotton shirts
Shirts
Cotton dresses
Dresses
Jeans
150
300
200
500
350
700
Handkerchiefs (10 pieces) 100
T-Shirts 125
11 EN
4 Selecting a Programme and OperatingYour Machine
Control panel
1
2
3
4
5
Shirts
Xpress 35
Jeans
Daily
Iron Dry
Synthetics
Cottons
Wool
Cupboard
Dry
Refresh
Spin / Time
Time Delay
Mix
Iron Dry
Cupboard
Dry
Start/Pause
Sport
Babycare
Delicates
Extra Dry
On / Off
Freshen Up
Cancel Press
& Hold 3 sec.
Timer
Programmes
Buzzer
Cancel
Dryness
Level
Anti-
Creasing
9
8
7
6
1. Washing machine spin speed*/Timer pro-
gramme selection
5. On/Off button
Used to turn on and off the machine.
6. Anti-creasing
Spin speed used to spin the laundry in the
washing macthine / Indicates the time for
timer programs.
Prevents the laundry from creasing after the
machine completes its programme.
7. Dryness level
2. Display
Indicates the status of the machine.
3. Start/Pause/Cancel button
Used to start, pause or cancel the
programme.
Used to adjust the required dryness level.
8. Cancel audio warning
Used to cancel the audio warning given at
the end of the programme.
4. Programme selection knob
Used to select a programme.
9.Time delaying buttons
Used to set the time delay.
Child-proof lock warning icon
Time delaying mode
Spin speed / Timer programmes
Operation icon
Door open warning icon
Anti-creasing mode
Pause icon
Water tank full warning icon
Filter cleaning warning icon
Condenser cleaning warning icon
Remaining time indicator
Audio warning level / Cancel audio warning
Drying degree
Anti-creasing is activated
Spin speed is used to show the remaining time more accurately.
It does not affect the performance of your machine.
Download from Www.Somanuals1.c2om.EANll Manuals Search And Download.
Iron dry
Ventilation
Anti
Creasing
CupboardCupboard
Cottons Synthetics
Ekstra
dry
Express
35’
Timer
dry
programs
dry plus
Child-proof
lock
Buzzer/ On/Off
cancel
Start
pause
cancel
Tank
full
Dryness
Level
Filter
Daily
Jeans
Shirt
Spin
cleaning
Timer
Delay
Wool
Refresh
Babycare Sport
Mixed
End/anti-
creasing
Drying
Drying
Rack
Delicates
C For further programme details, see,
"Programme Selection Table"
Main programmes
Depending on the type of laundry, the
following main programmes are available:
•Cottons
Preparing the machine
1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the “On/Off” button.
C Pressing the “On/Off” button does not
necessarily mean that the programme
has started. Press “Start/Pause/
Cancel” button of the machine to start
the programme.
You can dry your durable laundry with this
programme. Dries at high temperature. It
is recommended to use for your cotton
items (such as bed sheets, quilt cover,
underclothing, etc.).
Programme selection
Decide the appropriate programme from
the table below which includes drying
temperatures in degrees. Select the
desired programme with the programme
selection knob.
•Synthetics
You can dry your less durable laundry
with this programme. It dries at a lower
temperature compared to the cottons
programme. It is recommended for your
synthetic laundry (such as shirts, blouses,
synthetic/cotton blended laundry, etc.).
C Do not dry curtains and lace in your
machine.
Drying at high
temperature only for
cotton laundry. Thick
and multi layered
laundry (E.g.: towels,
linens, jeans) are dried
in a way that they do
not require ironing
before placing in the
wardrobe.
Special programmes
Extra dry
For special cases, there are also extra
programmes available:
C Additional programmes may differ
according to the model of your
machine.
•Xpress 35
Normal laundry (E.g.:
tablecloths, underwear)
are dried in a way that
they do not require
ironing before placing
in the wardrobe.
You can use this programme to dry your
cotton laundry that you have spun at high
speeds in your washing machine.This
program dries 1,5 kg cotton laundry (2
Shirts / 5 T-shirts) in 35 minutes.
C To obtain better results from your
dryer, your laundry must be washed
at suitable programmes and spun at
the recommended spin speeds in the
washing machine.
Cupboard
dry
Normal laundry (E.g.,
Shirts, dresses) are
dried ready to be
ironed.
Iron dry
13 EN
•Shirt
this programme.
This programme dries the shirts more
sensitively and creases them less and
thus, helps to iron them more easily.
C There may be a little humidity on your
shirts at the end of the programme. We
recommend you not to leave the shirts
in the dryer.
•Timer programs
•Jeans
You can use this programme to dry your
jeans that you have spun at high speeds in
your washing machine.
C Review the relevant section in the
programme table.
You can select one of the 10 min., 20
min., 30 min., 40 min., 50 min., 60 min.,
80 min., 100 min., 120 min., 140 min.
and 160 min. timer programmes to
achieve the desired final drying level at
low temperatures. Programme dries at
the selected time regardless of the drying
temperature.
•Mixed
Used to dry synthetic and cotton laundry
that do not release colour. Used for
laundry that is suitable for drying.
•Sport
Used to dry the laundry that are made
of synthetic, cotton or mixed fabrics and
have a tag indicating that they are suitable
for drying.
Time display
The display shows the time remaining
for the programme to complete while a
programme is running. Time is displayed
in hours and minutes as “02:30”. The
exemplary display image shows the dryer
when it is running and child-proof lock is
active.
•Wool Refresh
You can use this function to ventilate
and soften your woolen laundry that can
be washed in the washing machine. Do
not use this function to dry your laundry
completely. Take out your laundry and
ventilate them immediately after the
program is over.
CProgramme duration may differ from the
values in the consumption table subject
to the changes in the water hardness
and temperature, ambient temperature,
type and amount of laundry, auxiliary
functions selected, and changes in the
supply voltage..
•Daily
This programme is used to dry cottons
and synthetics daily, and lasts for 1 hour.
•Babycare
This programme is used for baby clothes
that bear machine dryable approval on its
label.
•Delicates
You can dry your highly delicate laundry
that are suitable for drying or laundry which
is advised to be hand-washed at a lower
temperature.
C It is recommended to use a cloth bag
to prevent certain delicate laundry from
getting creased or damaged. Take your
laundry immediately out of the dryer
and hang them after the programme
ends in order to prevent them being
creased.
•Freshen Up
Only ventilation is performed for 10
Tminutes without blowing hot air. You can
air your clothes that have been kept at
closed environments for a long time and
deodourise unpleasant odours thanks to
Download from Www.Somanuals1.c4om.EANll Manuals Search And Download.
Programme selection and consumption table
Programme table
EN
Approximate
Spin speed in
Capacity
amount of Drying time
Programs
washing machine
(rpm)
(kg)
remaining
humidity
(minutes)
Cottons / Coloreds
Extra dry
8
8
8
1000
1000
1000
% 60
% 60
% 60
154
142
120
A
Cupboard dry
Iron dry
A
A
Xpress 35’
Shirt
1,5
1.5
4
1200
1200
1200
1000
1000
600
%50
%50
%50
%60
%60
%50
%50
%60
35
45
90
90
100
6
Jeans
Mixed
4
Sport
4
Wool Refresh
Daily
1.5
4
1200
1000
72
80
Babycare
Synthetics
3
Cupboard dry
4
2
800
600
% 40
% 40
60
45
B
Delicates
Cupboard dry
B
Energy consumption values
Capacity Energy consumption value kWh Energy rat-
Programs
(kg)
per year
ing star
Cottons-Extra Dry*
8
350
2
* : Energy Label standard program (AS/NZS 2442)
All values given in the table have been fixed according to standard laboratory conditions.
These values may deviate from the table according to the laundry type, laundry spin
speed, environmental conditions and voltage fluctuations.
15 EN
Auxiliary function
Changing the contrast
Audio Warning
Contrast can be adjusted in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
change the contrast setting of the display
when the dryer is installed over a washing
machine.press and
Cancel
audio warning
Audio warning Audio warning
level 1 level 2
Audio warning
level 3
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear this buzzing or want
to change the volume level, you need to
press the “Volume level” button. No audio
warning will be given when “x” appears on
the screen.
Press and hold the Spin Speed/Time
button for 3 seconds.
When the contrast is changed at the end
of 3 seconds, all symbols on the display
will become visible for 3 seconds in order
to indicate that the process is complete.
Perform the same procedure to revert
back to the previous contrast setting.
C You can select this function either
before or after the programme starts.
Warning indicators
Drying degree
C Warning indicators may differ according
to the model of your machine.
Filter cleaning
Used to adjust the required dryness level.
More drying is performed compared to
the default settings when “+” sign appears
and less drying is performed when “-” sign
appears. Programme duration can change
depending on the selection.
A warning symbol will appear to remind
filter cleaning after the programme finishes.
C f the filter cleaning symbol flashes
continuously, please refer to
“Suggested solutions for problems”.
Water tank
A This function must be selected before
the programme starts.
Anti-creasing
A warning symbol will turn on at the end
of the programme or when the tank is full
with water. The machine stops operating
if the warning symbol turns on when a
programme is running. To restart the
machine, please drain the water in the
water tank. Press “Start/Pause/Cancel”
button to start the programme after you
have emptied the water tank. The warning
symbol turns off and the programme
resumes operating.
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the programme is over. This
programme rotates the laundry in
600-second intervals to prevent creasing.
Press “Anti-creasing” button to activate.
Anti-creasing is activated but the
programme is running in the first
exemplary figure. Drying is over and the
first step of anti-creasing has started in the
second figure.
Cleaning the condenser
Warning symbol turns on with certain
Download from Www.Somanuals1.c6om.EANll Manuals Search And Download.
intervals to remind that the condenser
needs cleaning.
set the desired time delay.
3. Press “Start/Pause/Cancel” button. The
Time delay symbol lights up. Pause
symbol fades. Start symbol lights up.
4. The “:” in the middle of the displayed
time delay will start flashing.
Door open
Canceling the time delay
If you want to cancel the time delay
countdown and start the programme
immediately:
Dryer door open symbol lights up.
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme.
2. Then, press “Start/Pause/Cancel”
button to start the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. “Start/Pause” symbol will light up
to indicate that the programme has
started and “:” symbol between the
remaining time will continue flashing.
Progress of programme
Time delay
With the “Time delay” function you can
delay the programme start up to 24 hours.
1. Open the loading door and put the
laundry in.
2. Set the drying programme and spin
speed, and if required, select the
auxiliary functions.
3. Press “Time delaying” buttons “+” and
“-” to set the desired time delay. The
time delay symbol will flash.
Anti-
creasing
Drying
Wardrobe
(Extra)
Iron
Ventilation
4. Press “Start/Pause/Cancel” button.
Then the time delay starts to count
down. The Time delay symbol lights up.
Start symbol lights up.
The progress of a running programme is
shown through a number of symbols on
the screen.
At the beginning of each programme
step, the relevant symbol in the series
of symbols will light up and thus, all
symbols will remain lit up at the end of
the programme. The symbol that is lit up
at the far right of the series of symbols
indicates the step that is being carried out.
“Drying”:
The “:” in the middle of the displayed time
delay will start flashing.
More laundry may be loaded or taken out
during the time delay period. At the end of
the time delay countdown process, time
delay symbol fades, drying process starts
and the programme duration is displayed.
The time on the display is the total of
normal drying time and delay time.
Time delay is started by pressing the start/
pause/cancel button in the exemplary
figure.
- Lights up in all programmes apart from
drying and ventilation.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and remains
illuminated until the next step.
“Cupboard Dry”:
Changing the delay time
If you want to change the time during the
countdown:
Starts to illuminate when the drying degree
reaches “wardrobe dry” step, and remains
illuminated until the next step.
“Extra Dry”:
1. Press “Start/Pause/Cancel” button for
3 seconds to cancel the programme.
Time delay function must be set again
for the required time.
Starts to illuminate when the drying degree
reach to “wardrobe dry extra” step.
“Ventilation”:
2. Press Time delay buttons “+” or “-” to
- Illuminates when the programme ends.
17 EN
C Anti-creasing icon will light up at the
end of the programme if anti-creasing
function is active.
Therefore, it is recommended to add
laundry before the drying programme
has started.
C If you select a new programme by
turning the programme selection knob
while your machine is in standby,
then the current program is cancelled
and new programme information is
displayed.
Changing the programme after the
programme has started
You can use this feature to dry your laundry in a
different program after your machine has started
to run.
Child-proof lock
There is a child-proof lock to prevent
any programme interruption due to the
pressing of button while the programme is
running. The loading door and all button
except the “On/Off” button on the panel
are deactivated when the child-proof lock
is active.
In order to activate the child-proof lock,
press on the “audio warning” and “anti-
creasing” buttons simultaneously for 3
seconds.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme. Select the “Extra Dry”
program by rotating the program knob.
Press “Start/Pause/Cancel” button to start
the program.
To start a new programme after the
programme is over or to interrupt the
programme, the child-proof lock should be
deactivated. Press the same buttons for
3 sec. again to deactivate the child-proof
lock.
CIf you select a new programme by
turning the programme selection knob
while your machine is running, then the
current program is cancelled and new
programme information is displayed.
Lock symbol will appear on the screen
when the child-proof lock is activated.
Adding/removing laundry in
standby mode
In order to add or take out laundry after
the start-up of the programme;
1. Press the “Start/Pause/Cancel” button
to switch the machine to “Pause”
mode. Drying process will stop.
2. Open the door at Pause position and
close it again after adding or taking out
laundry.
C Child-proof lock will also be deactivated
when the machine is restarted by
pressing the on/off button.
When the child-proof lock is activated:
• Display icons will not change even if the
position of programme selection knob
is changed while the machine is running
or in halt.
• If the child-proof lock is deactivated
after changing the position of the
programme selection knob while your
machine is running, your machine stops
and new programme information is
displayed
3. Press “Start/Pause/Cancel” button to
start the program.
C Any laundry added after the drying
process was started may cause the
already dried clothes in the machine
intermingle with wet clothes and the
result will be wet laundry after the
drying process is over.
CLaundry may be added or taken out
as much as desired during a drying
process, but as this process will
interrupt drying continuously, it will
extend the program duration and
increase energy consumption.
Download from Www.Somanuals1.c8om.EANll Manuals Search And Download.
Ending the programme through
canceling
A new program can be selected and
started after “Program cancel” is activated
in order to change the drying program.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for
about 3 seconds. “Lint filter cleaning” and
“Water tank” warning symbols light up and
“End” label appears on the screen as a
reminder at the end of this period.
A As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool
it down.
C If you change the position of
programme selection knob while your
machine is running, then the machine
stops, current programme is cancelled
and new programme information is
displayed.
End of programme
“Filter cleaning” and “Water tank” warning
symbols light up and “End” label appears
on the screen in the programme follow-
up indicator when the programme ends.
The door can be opened and the machine
becomes ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C When selected, the 2-hour anti creasing
programme will be activated to prevent
laundry from creasing if you do not take
the laundry out after the programme
has come to an end.
C Clean the filter after each drying (please
see, Filter cleaning).
C Drain the water tank after each drying
(please see, Water tank)
19 EN
5 Maintenance and cleaning
Filter Cartridge / Door Inner
Surface
Lint and fibres released from the laundry to
the air during the drying cycle are collected
in the “Filter Cartridge”.
Sensor
C Such fibre and lint are generally formed
during wearing and washing.
C Always clean the filter and the inner
surfaces of the cover after each drying
process.
C You can clean the filter and filter area by
vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up
and open the filter.
3. Clean lint, fibre, and cotton raveling by
hand or with a soft piece of cloth.
4. Close the filter and place it back into its
seat.
C Clogging may arise on the filter surface
after using your machine for some time;
if this occurs, wash the filter with water
and dry it before using again.
There are humidity sensors in your dryer
that detect whether the laundry is dry or
not.
To clean the sensor:
1. Open the loading door of the dryer.
2. Allow the machine to cool down if
drying has been carried out.
3. Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry
them.
C Clean metal sensors 4 times a year.
A Never use solvents, cleaning agents
or similar substances when cleaning
since these materials can cause fire and
explosion!
C Clean the entire inner surface of the
cover and door gasket.
Download from Www.Somanuals2.c0om.EANll Manuals Search And Download.
1. If a drying process has been carried out,
open the door of the machine and wait
until it cools down.
Water tank;
The moisture in the damp laundry is taken
from the laundry and condens ed. Drain
the water tank after each drying cycle or
during drying when “Water tank” warning
light turns on.
A Condensed water is not drinkable!
A Never take out the water tank when the
programme is running!
If you forget to drain the water tank, your
dryer will stop during the following drying
cycles when the water tank is full and the
“Water tank” warning light will turn on. If
this is the case, press the “Start/Pause/
Cancel” button to resume the drying cycle
after draining the water tank.
2. Unlock the 2 condenser locks after
opening the kick plate.
*To drain the water tank:
1-Pull the drawer and remove the water
tank carefully.
3. Pull out the condenser.
2-Drain the water in the tank
4. Clean the condenser by applying
pressurized water with a shower
armature and wait until the water
drains.
3-If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
4-Place the water tank into its seat.
For the condenser;
Hot and humid air in the condenser is
cooled with the cold air from the room.
Thus, the humid air circulating in your
dryer is condensed and then pumped into
the tank.
C Clean the condenser after every 30
drying cycles or once a month.
To clean the condenser:
21 EN
5. Place the condenser in its housing.
Fasten the 2 locks and make sure that
they are seated securely.
6. Close the kick plate cover.
Download from Www.Somanuals2.c2om.EANll Manuals Search And Download.
6 Suggested solutions for problems
Drying process takes too much time
• Meshes of the filter may be clogged. Wash with water.
Laundry comes out wet at the end of drying.
• Meshes of the filter may be clogged. Wash with water.
• Excessive laundry might have been loaded in. Do not load the dryer in excess.
Dryer does not switch on or the programme does not start. Dryer is not activated
when set.
• It might have not been plugged in. Make sure that the machine is plugged in.
• The loading door may be ajar. Make sure that the loading door is properly closed.
• Programme might have not been set or the "Start/Pause/Cancel" button might
have not been pressed. Make sure that the programme has been set and it is not
in “Pause” mode.
• "Childproof lock" might have been activated. Deactivate the childproof lock.
Programme has been interrupted without any cause.
• The loading door may be ajar. Make sure that the loading door is properly closed.
• Electricity may be cut off. Press "Start/Pause/Cancel" button to start the
programme.
Laundry has shrunk, become felted or deteriorated.
• A programme suitable for the laundry type might have not been used. Dry only
the laundry which is suitable for drying in dryer after checking the labels on your
clothes.
• Select a programme with suitable low temperature for the laundry type to dry your
clothes.
Drum lightning does not come on.
• Dryer might have not been started by using the "On/Off" button. Make sure that
the dryer is on.
• Bulb may have blown. Call the authorized service to replace the bulb.
“Final / Anti-creasing” symbol flashes.
• The 2-hour anti creasing programme to prevent laundry from creasing might have
been activated. Turn off the dryer and take out the laundry.
“Final / Anti-creasing” symbol is on.
• Programme has come to an end. Turn off the dryer and take out the laundry.
Water comes out the cover.
• Clean the entire inner surface of the cover and door gasket.
Cover opens spontaneously.
• Push it until you hear that it is closed.
For products with a condenser:
“Water tank” warning symbol is on.
• Water may be full.
• Anti-creasing programme might be running. Drain the water in the tank.
“Filter cleaning” symbol is on.
• Filter might have not been cleaned. Clean the cover filter.
23 EN
“Condenser cleaning” symbol is on.
• Filter drawer/Condenser might have not been cleaned. Clean the filters in the
condenser/filter drawer under the kick plate.
A Call an authorised service if the problem persists.
Download from Www.Somanuals2.c4om.EANll Manuals Search And Download.
|