BRK electronic Carbon Monoxide Alarm CSA619 User Manual

RELAY  
CAT.  
120V AC, 60Hz Wire-in  
RM4  
Designed to activate an auxiliary device when an alarm is initiated. The RM4  
Relay is intended for use with BRK and First Alert Smoke, Heat and Carbon  
Monoxide Alarms. The relay contacts will activate whenever any interconnected  
alarm sounds. The relay contacts will automatically deactivate a few seconds  
after the alarm stops sounding. The RM4 may be wired next to an AC alarm or  
from a remote location. This relay must be installed in a junction box.  
ALARM RELAY  
Activates auxiliary devices from smoke,  
CO and/or heat alarm signal.  
Interconnects smoke alarms, carbon monoxide alarms and heat alarms with:  
SMART  
• Lights  
• Bells  
INTERCONNECT  
• Door Closers  
• Sirens  
• Exit Signals  
• Escape Lights  
• Exhaust Fans  
• Other Auxiliary Devices  
Works with all First Alert and BRK  
“Smart Interconnect” CO Alarms.  
MEETS UL  
STANDARDS  
UL217, UL2034 and UL539 for accessories.  
MEETS ULC  
STANDARDS  
ULC S-531, CSA6.19 and  
ULC S-530 for accessories.  
FITS IN MOST  
STANDARD  
ELECTRICAL BOXES  
 

Blodgett Electric Steamer CONVECTION STEAMERS KETTLES BRAISING PANS User Manual
Blue Rhino Landscape Lighting Outdoor Lighting User Manual
Bosch Appliances Home Security System DS924IPET User Manual
Bose Stereo System AM352156 User Manual
Brother Sewing Machine Innov is 30 User Manual
Bush Hog Sander MP5 User Manual
Califone Portable Speaker PA150 User Manual
Campbell Hausfeld Nail Gun IN715703AV User Manual
Casio Computer Hardware G486VPB User Manual
Chauvet Speaker System DMX 40B User Manual