LED LCD TV/DVD Combo
IDLED2202DVD
IDLED2402DVD
The Gold Technical Support Line:1902 215 259
Personal Product Support
(Charges will applyat $2.95 perminute)
Contents
INTRODUCTION.............................................................................. 1
SAFETY INSTRUCTIONS.............................................................. 3-4
BASE STAND INSTALLATION ..........................................................5
WALL MOUNTING INSTALLATION .................................................... 6
INSTALLATION........................................................................... 7-10
REMOTE CONTROL..................................................................11-12
OPERATION............................................................................. 13-18
DVD OPERATION..................................................................... 19-23
DVD TROUBLESHOOTING.............................................................24
TROUBLESHOOTING.....................................................................25
TECHNICAL SPECIFICATIONS.................................................. 26-27
WARRANTY................................................................................... 28
-2-
SAFETY INSTRUCTIONS
1. Do not use this TV near dripping or splashing water. Do not use any liquids near this TV.
2. Clean witha dry cloth only.
3. Do not block any ventilation openings and install in accordance with the manufacturers
instructions.
4. Do place this TV near any heat radiating sources, such as; heaters, stoves, or other
devices (including amplifiers) that produce heat.
5. Please ensure that the power cord is protected from damage (i.e. being walked on, cut
or split) especially at the inputs.
6. Only use attachments/accessories specified in this manual.
7. Unplug the TV during lightning storms or when the unit will be unused for long periods of
time.
8. Refer all servicing to a qualified service personnel. Servicing is required when the TV
has been damaged in any way, such as; if the power-supply cord or plug is damaged, if
liquid has been spilled or objects have fallen into the TV, if the TV has been exposed to
rain or moisture, if does not operate as per this manual, or if it has been dropped.
9. The TV should not be exposed to dripping or splashing and no objects filled with liquids,
Such as vases, should be placed on the apparatus.
10.If the television is to be built into a cabinet or similar enclosure, a small amount of
distance should be maintained to ensure ventilation. Heat build-up will reduce the
service life of your television, and can also be dangerous.
ADDITIONAL SAFETY NOTES
Never tamper withany components insidethe TV, or anyother adjustment controlsnot
mentioned in thismanual.
All LED LCD-TVsare high voltageinstruments. When youclean the unitor cabinet turnoff
the power anduse a drysoft cloth.
During thunder andlighting, unplug thepower cord andantenna cord toprevent damage to
your TV.
All repairs tothis TV should only beperformed by qualifiedTV service personnel.
-3-
SAFETY AND WARNINGS
Important Safety Instructions
Warning: To reduce the risk of electric shock, do not remove the cover or back as there
are no user-serviceable parts inside. Refer all servicing to a qualified technician.
Warning: To prevent fire or electric shock hazard, do not expose the unit to any liquids or
moisture.
Do not expose the TV and power adaptor to water (dripping or splashing) and no objects
filled with any liquids, such as vases, should be placed on or near the unit.
Please ensure that this product is kept away from direct sunlight and heat sources.
Do not block the any of the ventilation openings. Slots and openings on the unit are
provided for ventilation. The openings should never be blocked.
Do not place the product on any unstable surfaces as this may cause the unit to fall and
may cause possible damage or injury.
Never place heavy or sharp objects on the panel or frame.
Only use the AC adapter included with product. Using any other adaptor will void your
warranty.
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To dispose of your LED LCD TV contact your retailer where the product was
purchased for tips on safe disposal when the time comes.
-4-
INSTALLATION
ACCESSORIES
Remote Control x 1
User s Manual x1
Battery(AAA) x 2
Base Stand Assembly Instruction
1. Place theTV with the display sidedown
on a flatsurface.Use a clothto protect.
Locate the bottomat the stand.
2. Fix thebottom with turningthe screw
tightly on thestand.
INSTALLATION NOTES
This TV can be connected to an AC 100-240 Volts, 50/60 Hz power supply. Never connect
straight to a DC power supply.
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
-5-
INSTALLATION
WALL MOUNTING INSTALLATION GUIDELINES
This television can be wall mounted as follows:
1.Place the LED LCD Television onto a solid surface. Please place some soft material over
the front ofthe screen to protect it fromany damage.
2.Remove the screws from the lower part of the television, where the base joins to the
TV, and take away the stand (put the stand somewhere safe for future use).
3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)
via the four VESA standard holes on the back of the television.
100mm
-6-
INSTALLATION
Front panel
3
1: Remote Control Sensor.
2: Indicator LCD LED:
BLUE POWER ON.
RED STANDBY.
3: Side buttons (refer to image below)
1
2
30 30
Side Buttons
SOURCE
MENU
CH+
OPEN/CLOSE
PLAY/PAUSE
CH-
VOL+
VOL-
STANDBY
1
2
3
SOURCE
Press the SOURCE Button to display the Input Source list.
MENU
Press the MENU Button to display the Main Menu.
CH+/CH-
Press the CH+/CH- Buttons to change the channel.
In the SOURCE Menu, press the CH+/CH- Buttons scroll through the Input Source List.
In the MAIN MENU, press the CH+/CH- Buttons to scroll through the Menu options.
VOL+/VOL-
4
Press the Vol+/Vol- Buttons to adjust the Volume level.
Press the Vol+/Vol- Buttons to confirm your selection in the Input Source Menu.
5. STANDBY
Press this button to turn the unit ON from STANDBY mode.
Press it again to turn the set back to STANDBY.
6. OPEN/CLOSE
Press this button to eject yourdisc.
7. PLAY/PAUSE
Pressthis button to play disc or press again to pause.
-7-
INSTALLATION
Rear Sockets
DC 12V/3A
AV
L
R
Y
Pb
Pr
HDMI2
Outlined below isthe Rear Socketsprovided -
AV Input, R/L Audio Input, DC Power SourceInput, YPbPr Input and HDMI2Input.
Note: 1. The AV Input andYPbPr Input share one audiochannel.
2. When HDMI 2is connected withDVI video source, the R/L of AV will beused
for audio sourceinput.
Side Sockets
AV OUTPUT
L
AV
R
HDMI1
USB
PC AUDIO
VGA
RF
Outlined below isthe Side Socketsprovided -
HDMI1 Input, USBInput, PCAudio Input, AV Output, VGA Input and RFInput.
Note: When HDMI1 is connectedwith DVI videosource, the "PCaudio input" willbe
used for audiosource input.
ANTENNA
Note:
Aerial Connections: IEC(female).
Input Impendance: 75 unbalanced.
PC
AV OUTPUT
AV
L
R
HDMI1
USB
PC AUDIO
VGA
RF
STEPS:
Ensure the TV and yourcomputer are bothset
to power off before yourconnect.
1.Connect the VGAInput & PCAudio Inputas
above.
2.Connect power supplyagain to yourTV set.
3.Turn on the TV and then pressthe SOURCE
Buttons to select PC mode.
4.Then turn thePC power on.
-8-
INSTALLATION
DC 12V/3A
AV
L
R
Y
Pb
Pr
HDMI2
PC
PRESET MODE
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
4
720*400
70
31.47
640*480
800*600
60
56
31.47
35.156
800*600
60
37.88
800*600
72
60
48.08
48.36
5
6
1024*768
7
1024*768
70
56.48
-9-
INSTALLATION
AV EQUIPMENT
Please follow one of the below instructions when connecting your TV to other devices.
AV OUTPUT
L
AV
R
HDMI1
USB
PC AUDIO
VGA
RF
W
R
VIDEO EQUIPMIENT
TO VIDEO
INPUTS
W
R
HDMI
TO AUDIO INPUTS
VIDEO EQUIPMENT with YPbPr
G
B
R
W
R
Y
W
R
Yellow (video)
White(audio L)
Red(audio R or Pr)
Blue(Pb)
B
G
Green(Y)
G
B
R
R
W
DC 12V/3A
AV
L
R
Y
Pb
Pr
HDMI2
W
R
VIDEO EQUIPMIENT
W
R
TO VIDEO
OUTPUTS
HDMI
TO AUDIO OUTPUTS
YPbPr Connection can support these video formats: 480i, 576i, 480p, 576p, 720p, 1080i and
1080P.
-10-
REMOTE CONTROL
Remote Control - TV section
1:POWER:Press to turnthe unit onor off.
2:NUMERIC KEY:Press for directaccess to channels.
3:TV MENU:Press to displayTV Main Menu.
4:CURSOR:Press to scrollthrough the Menu.
6:VOL+/- :Press to adjustthe sound level.
7:PIC:Press to switchbetween picture modes.
8:SLEEP:Press to setSleep Timer.
9.REC:Press to recordthe TV programyou
are watching inDTV Mode
10:TV/RADIO:Press to switchbetween TV andRadio modes.
11:EPG:Press to display the 7 Day Electronic Program Guide
For information on the show you are watching.
12:FAV:Press to accessyour favourite channelslist in TVor
DTV mode
15:REWIND:Press to rewindplay in USBMode and Timeshift
Mode.
16: FAST FORWARD:Press to FastForward play inUSB mode
or TimeshiftMode.
17:PLAY:Press the PlayButton in USBMode or Time Shift
Mode to beginor continue Playback.
18:PAUSE:Press the PauseButton to pauseplay in Time
Shift or USBMode or pauserecording in RecordMode.
19:TELETEXT KEYS:Refer to page12.
20:MUTE:Press to disableor enable thesound output.
21:TV/AUDIO:To select the availableaudio language ofTV
programs .
22:RECALL/GOTO:Press to returnto the previouslyviewed
channel.
23:SOURCE:Press to displaythe Input SourceList.
24:OK:Press to confirmMenu selections.
25:EXIT:To exit the mainmenu, press theExit Button orto
cancel setting selections.
A-B
26:SOUND:Press to switchbetween the soundmodes.
27:CH+/CH-:Press to scrollthrough your ChannelList.
28:ASPECT:Press to changethe picture aspectratio.
29:TEXT:Press to enteror exit TELETEXTmode.
30:INFO:Todisplay the programinformation of theshow you
are watching, pressthe Info Button.
33:SKIP FORWARD:Press to skipthe next fileor track in
USB Mode.
34: SKIP BACKWARD:Press to skipthe previous fileor
Track in USB Mode
35:SUBTITLE:Toturn on Subtitlespress the SubtitleButton
in DTV mode.
36. :Press to stopplaying in USBmode, or pressto stop
Time Shift.
37:FREEZE:Press to freezethe picture youare watching.
NOTE: For the DVD section, please refer to page 20.
-11-
REMOTE CONTROL
TELETEXT
Teletextis an informationsystem broadcasted bycertain channels whichwill provide
detailed program information. It also offers access tosubtitles for viewerswith hearing
problems or whoare not familiarwith the transmissionlanguage(cable networks,
satellite channels, etc.)
Press:
TEXT
You will obtain:
This is usedto access and/orexit the Teletext mode.Asummary will
appear with alist of itemsthat can beaccessed. Each itemhas a 3digit
page number. If the channelselected does notbroadcast teletext, 100
will be displayedand the screenwill remain blank(in this case, exit
teletext and selectanother channel).
Toview a specificpage enter thepage number requiredby using the
Numeric Buttons. Thenumber will bedisplayed on thetop left. The
page counter willturn until thepage is displayed. Repeat this operation
to view anotherpage. If thecounter continues tosearch, this means
that the pageis not transmitted.
SELECTING A PAGE
The coloured buttonscorrespond to thecolour options atthe bottom of
the screen. Thefour coloured keysare used toaccess the itemsor
corresponding pages. Thecoloured areas flashwhen the itemor the
page is notyet available.
DIRECT ACCESS
TO THE ITEMS
INDEX
This button willopen/return you tothe contents page.
Certain pages containsub-pages which areautomatically displayed.
This key is used to stopor resume sub-pageacquisitionThe indication
appears top left.
SUB PAGE
To freeze the page.
HOLD
To display or hide the concealed information.
REVEAL
The user canset four favouritepages to bedirectly linked tothe four
color keys. Whilelist mode isactivated, it isnot possibility touse TOP
or FLOF navigationwith the colourkeys. The favouritepage numbers
should be storedand restored to/fromnonvolatile memory foreach
channel by thesystem software.
LIST
-12-
OPERATION
Installation Guide
Please select an OSD Language
Cesky
English
Magyar
Polski
Fran ais
~
Espanol
Dansk
Deutsch
Hrvatski Nederlands Portugues
E
k
Italiano Norsk
OK
Pycck
Country
Australia
Austria
Bulgaria
Denmark
Finland
France
Germany
Italy
Luxembourg
Croatia
Czech
Greece
Netherlands
Belgium
Hungary
OK
This will appear during the firsttime installation and when you resetthe TV.You canchoose any of the above
languages or countries.
The TV will then automaticallyscan for all available stations andstore the in the station list.
1.CHANNEL MENU
Press the TVMENU Button todisplay the ChannelMenu.
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
CHANNEL
<
>
Signal Information
Software Update(USB)
1)Auto Tuning:
An Auto Scan willsearch for all availableATV and DTVStations and store them in thestation list.
Tune Type
DTV+ATV
Bulgaria
Australia
Denmark
Austria
Croatia
Czech
Finland
France
Belgium
MENU
To conduct an Auto Scan, press the arrow buttons to select the Auto Scan Setting and press OK to
confirm. To stop scanning at anytime, press the Menu or Exit Button.
Channel Tuning
TV : 0 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
96% UHF CH 68 DTV
-13-
OPERATION
2)DTV Manual Tuning - Select the DTV Manual Tune option in the Channel Menu,to conduct a Manual
scan. Use the
Buttons manually scanthrough the DTV Manual Tune channels, then press OK tosearch.
DTV Manual Tuning
_
VHF CH
5
+
Press OK to search
Nomal
Bad
Good
3)ATV Manual Tuning - Select the ATV Manual Tune option in the Channel Menu and follow the above
steps.
ATV Manual Tuning
_
Storage To 1
+
System BG
Current CH 1
Search
Fine-Tune
Frequency 255.25 MHz
Save
MENU
NOTE:
Press the Red Teletext Button tosave and store the channel you have manual scanned.
4). Program Edit:
Prorgram Edit
1--
2--
DTV
ATV
Delete
Rename
Move
Skip
Favourite
OK
MENU
Delete
Press the Red Teletext Button to delete a programor channel in the channel list.
Rename:
This feature isonly available forATVprograms. Use the
to the selectthe channel/ programyou
wish to rename. Then press theGreen Teletext Button toRename. Use the
Buttons to selectthe
character to renameand then pressOK to confirm. Press the MENUButton or EXITButton to exitthis
option.
Note: ATV programs canonly be 5 characters.
Use the Arrow Buttons toselect the channelyou wish tomove. Then pressthe Yellow Button toselect
Move function. Onceactive use theArrow Buttonsto move andthen press OKto confirm.
Use the Buttonsto highlight thechannel/program you wishto set toSkip. Then pressthe Blue
TeletextButton and theSkip icon willbe displayed nextto the programand it willbe skipped inthe
program list. Pressthe Blue Buttonagain to cancelthe skip setting.
-14-
OPERATION
Favourite
Use the
Buttonsto select theprogram you wishto set toyour favourites listand press theFAV
Button to set. The favourite Iconwill then bedisplayed next tothe program. Pressthe FAV Button again
to cancel setting.
2. PICTURE MENU
To enterthe Picture mode, press the MENUbutton and then press or buttonsto select the Picture Menu.
Once in the Picture mode, pressthe or buttons to select thepicture settings you wish to adjust.Toreturn
to the Main Menu, press theMENU Button.
Picture Mode Standard
Color Temperature
Aspect Ratio
Noise Reduction
PICTURE
Screen
<
>
Color Temperature
Medium
Picture Mode
Standard
Contrast 82
Red 40
Green 31
Blue 50
Brightness 50
Color 50
Sharpness 50
Tint 50
MENU
MENU
NOTE:
1) Youcan change the screen position inPC Mode only.You canadjust to horizontal, vertical, size andphase.
3.SOUND MENU
Toenter the SoundMenu, press MENUbutton and thenpress or buttonsto select theSOUND Menu.
Once in theSound Mode, press or buttons toselect the settingsyou wish toadjust. Press MENU
button to returnto the MainMenu.
Sound Mode Standard
Balance
Auto Volume
SOUND
<
>
Note:
Auto Volume is onlyavailable when the input signal volumeis too large or distorted.
4.TIME MENU
Toenter the Time Menu, pressMENU button & then press or buttons to selectthe TimeMenu.
Clock -- -- -- --
Off Time
On Time
Sleep Timer
TIME
<
>
Auto Sleep
Time Zone
NOTE:
When you set theAuto Sleep option to ON, yourTV will automatically enter intoStandby Mode, when there
has been no signal for 15minutes.
-15-
OPERATION
5.OPTION MENU
To enter the OptionMenu, press MENUbutton and thepress or buttonsto select theOption Menu.
Once in OptionMenu, press or buttons to selectthe settings youwish to adjust. Press MENU button
to return tothe Main Menu.
OSD Language English
Audio Languages
Subtitle Languages
Country Australia
OPTION
<
>
PVR File System
Restore Factory Default
In PVR FileSystem Menu youwill be askedto format yourUSB Disk orHard Disc forPVR Operation.
Select Disk
C:
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
Select Disc
To view and selectthe USB fileor the allocatedspace on yourHard Disc thatyou would liketo record to,
press OK buttonto enter the Select Disc Sub-Menu and thenpress or buttonson your remotecontrol
to select theparticular partition/file forrecording.
Press the MenuButton to returnto the MainMenu.
Check PVR FileSystem
Press the OKButton to startchecking the filesystem of yourUSB storage orHard Disk. OnceSuccess
is shown afterchecking, you willthen be ableto begin recordingor or useTime Shiftfunction. If FAIL is
shown after checking, you then needto format yourUSB or HardDisc and tobe able torecord or use
Time Shift.
Format
When you formatyour USB or Hard Disc partitionany saved datawill be lost. Please ensure
that you startwith a blankpartition on yourHard Disc toensure you don'tlose any data.
File System Size
PVR File System Type
PVR File System Size
FAT32
All
SD 13 Mins
HD 3 Mins
MENU
PVR File SystemType
There are twotypes of formats: FAT32 and HiSpeed Format. You can press or buttons tochoose
the type offormatting. If FAT32 isselected, you willhave to formatwhole size ofyour USB orthe
allocated partition forrecording. If HiSpeed Format isselected, you willthen be ableto press or
buttons to selectthe size youwish to use(for example 1G, 10G, 20G... orAll). Oncea particular sizeis
booked for recording, you will beable to usethe remaining spaceof your USBor Hard Discfor other data
storage.
Please note nomatter which sizeis booked forrecording, all thedata in theallocated partition ofthe
Hard Disc willbe lost afterformatting.
Speed
This will showthe supported speedof recording.
Record Limit
This will showthe approximate timeyou will beable to recordon to yourUSB or HardDisc.
-16-
OPERATION
FACTORYRESET NOTE:
If you wishto reset yourTV, please select theRestore Factory Defaultoption, this willclear all settings.
6.LOCK MENU
Toenter the LOCKMenu, press MENUbutton and thenpress or buttonsto select theLOCK Menu.
The default passwordis 6666.
Please set anew password toso it iseasy to remember. Follow theon screen stepsto set.
Lock System
Set Password
Block Program
Parental Guidance Off
LOCK
<
>
7. APPLICATIONSMENU
Toenter theApplications Menu, pressMENU button andthen press
Applications Menu. Thisis where youwill be able to view andplay your USBfiles.
or buttons to select the
DMP
APPLICATIONS
<
>
Press the OKbutton to enterthe DMP Menu.
PHOTO
MUSIC
MOVIE
TEXT
The supported formatsare as below:
Photo: JPEG, BMP, PNG
Music: MP3
Movie: AVI, MP4, MKV
Text:TXT
-17-
OPERATION
Sample1.ts
Resolution: 720x576
AudioTrack:
Subtitle:
1/2
½
1/1
Size:
30574 KBytes
Close
8.EPG Menu(Electronic Program Guide).
The EPG Menu is used to look at what is being broadcasted in DTV or Radio modes. Press the EPG
Button to access the EPG Menu. You will receive detailed program information of the channel you
are currently watching as well as the 7 Day Program guide.
PROGRAMME GUIDE
28 Apr 04:39
TIME
800 SZTVM01
801 SZTVM02
802 SZTVM03
803 SZTVM04
804 Date
No Information
No Information
No Information
No Information
No Information
Record
OK
INFO
Schedule
Remind
INDEX
INFO
to select a program andthen press the Green Button orINFO key to display the highlighted
1.
Use
program's information.
Schedule
2.
Press the Yellow Button to view thescheduled programs you have bookedfor watching or recording.
You canalso press the Red buttonto delete the program fromyour scheduled programs list.
Schedule List
Time Date
04:55 28th Apr
Delete
Programme Title
Channel Name
3.
Record
By pressing the Red Button you can book the program you would like to record. Please ensure a supported
USB or Hard Disc is connected with TV to ensureprogram will be recorded successfully.
Remind
4.
Press the Blue Button to booka program for future viewing andadd to the schedule list.
Reminder setting
_
802 SZTVM03
+
08 Minute
05 Hour
Apr Month
28 Date
Once Mode
OK
BACK
-18-
DVD OPERATION
DVD SIDE PANEL
OPEN/CLOSE
PLAY/PAUSE
Caution
This DVD Player has a Class 1 laser which may be harmful. Do not attempt to disassemble the cabinet or make
any adjustments. Please refer all servicing to a qualified professional.
DVD OPERATION
Disc Formats Supported by this DVD Player:
32
9
Multi-angle
Dolby Digital
KODAK picture CD
MPEG4 files on discs
Subtitle choices
LB
16:9
8
R
RESTRICTED
MP3 files on
CD-R/CD-RW
TV Aspect
Ratio modes
Audio choices
DVD video
Parental Lock
This item incorporatescopy protection technologythat is protectedby U.S. patentsand other
intellectual property rightsof Rovi Corporation. Reverse engineering anddisassembly are prohibited.
The product complies with the KODAK Picture CD format and will display KODAK Picture
CDs. The "KODAK Picture CD Compatible" logo is a trademark of Eastman Kodak Company
and is used with permission.
Manufactured under license from Dolby Laboratories."Dolby" and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished Works.
1992-1997 Dolby Laboratories, Inc. All rights reserved.
-19-
DVD OPERATION
Remote Control - DVD section
2:Numeric keys:Press to setthe time, selecttitle, chapter ortrack
you wish toplay. Pressthe ENTER/OK Buttonto confirm. Whena
VCD is playing(with PBC off),press the Numerickeys to selecta
track directly.
5:DVD MENU:During DVD playback, press MENU todisplay the
disc menu.
9:DVD SETUP:Press to enterthe system settingmenu. Press again
to exit themenu.
11:Play/Pause:Press to beginplay of theDVD of mediayou wish to
view. Pressagain to pauseplay.
12:STOP:Press to stopplay of theDVD you arewatching at anytime.
13: A-B:Press to repeata segment ofthe disc youare watching
between Aand B. (DVDmode)
14:TITLE:Press to displaythe DVD MainMenu.
15:REV:Press to rewindplay in DVD, CD MP3 orVCD mode. Press
repeatedly to scrollthrough rewind speeds. Press the Play/Pause
Button to resumeplay.
16:FWD:Press to fast-forwardplay in DVD, CD MP3 orVCD mode.
Press repeatedly toscroll through fast-forwardspeeds. Press the
Play/Pause Button toresume play
17:RETURN:Press to returnto the MainMenu.
18:DISPLAY:Press to showthe information ofthe current playing
disc.
21:EJECT:Press the EjectButton in conjunctionwith the Open/Close
Button the backof the unitto Eject yourDVD.
22:GOTO:For DVD discs, press to choosethe desired titleand
chapter and searchthe desired title, time and chaptertime. For
Super VCD,VCD,CD discs, press this buttonto search thedesired
disc time andtrack time andchoose the desiredtrack.
Note: During VCDplayback, the PBCmode must beset to OFF.
24:OK:Press to confirm.
A-B
31:ANGLE:Press to viewscenes shot fromdifferent angles. (Disc
support is required)
32:PBC:During VCD/SVCD playback, press PBC tocontrol PBC
ON/OFF.
33:NEXT:During DVD,CD,MP3, orVCD playback, pressNEXT to
play the nextchapter, titleor track.
34:PREV:During DVD, CD,MP3, or VCD playback, press PREV
to play theprevious chapter, title or track.
35:SUBTITLE:Press to choosedifferent captions (Requiressupport
from disc).
37:FREEZE:Press to freezethe picture youare watching.
-20-
DVD OPERATION
MENU OPERATION
Press the Setup Button on the remote control to display the DVD Setup Menu. Once in the Setup Menu
use the Cursor Buttons to select your desired Settings. Then press theENTER/OK Button to confirm.
To exit the Setup Menu, press the Setup Button again.
In the Setup Menu, you may choose any of the following options:
LANGUAGE SETUP
Use the Cursor Buttons in the Setup Menu to select the Language option and display the Language
sub-menu:
OSD Language
The OSD Language allows you to set Subtitle or change the on-screen display language.
Subtitle
This option provides the preset subtitle language.
MPEG4 Subtitle(optional)
Select different MPEG4subtitle encoding option.
Note: Not all players support this item.
Audio
This option allows you to change the Audio Language of the DVD you wish to play.
DVD Menu
This option provides the film's menu language options.
VIDEO SETUP
Select Video in the setup menu to display the Video submenu:
SYSTEM SETUP
Aspect Ratio
In the VideoSetup Menu use the Cursor Buttons to select the aspect ratio.
Notes:
The image display ratio is related to the recorded disc format. Some discs may not be able to format to
the aspect ratio of your choice.
TV System
In the VideoSetup Menu use the Cursor Buttons to select the differentTV systems.
-21-
DVD OPERATION
RATING SETUP
The Rating setup allows youto lock playof certain ratedmovies/DVDs. Use theCursor Buttons to
select the Ratingoption in theSetup menu andto display theRating submenu:
Parental Control
The Parental ControlSetting allows youto lock theDVD Player. You must enter thedefault password
(6666) before settingyour own password.
Setting the Password
Once you haveentered the defaultpassword you willbe asked toinput a fourdigit code ofyour choice.
Press the ENTER/OkButton to confirm.
Note: If youforget your password, you can usethe universal password6666 to unlock.
MISC Setup
Use the CursorButton in theSetup Menu toselect the MISC Menu and to displaythe sub-menu:
Use Default Settings
This allows youto reset yourDVD settings andgo back tothe factory defaultsetting. This willerase all
previous settings.
MP3/WMA/JPEG/MPEG4 PLAYBACK
-22-
DVD OPERATION
When playing anMP3, WMA, JPEGor MPEG4 discthe above screenwill appear. Tonavigate this menu,
use the Buttonsto scroll throughthe directory optionsor to selecttracks or filesyou wish toplay.
Press Enter/OK Buttonsto confirm anyselections.
Filter:This option allowsyou to filterand categories yourfile list inthe directory menu.
Repeat: This option allowsyou to seta desired trackto repeat.
Mode:The Mode optionallows you toscroll through thebelow playing modes:
Normal:This will playthe tracks orfiles in theorder they appearin the directory.
Shuffle:The Shuffle mode allows thetracks and orfiles to beplayed at random.
Edit Mode:This option allowsyou to editthe directory andfiles and tracksdisplayed. Use theCursor
Buttons to selecttracks or filesyou wish toedit and pressthe Enter/OK Button. Toexit the EditMode or
cancel press theexit button.
Program View:This option allowsyou to displaythe track orfile directly.
Browser View:This option allowsyou to displaytrack directory.
Add to Program:This option allowsyou to createyour own playlistin the trackdirectory.
Clear program:This option allowsyou to clearany playlists youhave created.
PICTURE CD PLAYBACK
When you wishto view Picturefiles, the belowdirectory will show.
Tonavigate this menu, use the Buttonsto scroll throughthe directory optionsor to selecttracks or
files you wishto play.Press Enter/OK Buttonsto confirm anyselections.
-23-
Troubleshooting
If you haveany questions, pleaseconsult the troubleshootingguide below:
NO PICTURE ORSOUND
Ensure the powerbutton is on.
Ensure the poweroutlet is operational.
Ensure the powercord is notdamaged.
Ensure the powerplug is connectedfirmly to theoutlet.
PICTURE BUT NOSOUND
Ensure the audiois not setto mute.
Ensure you haveset the player's Audio settingscorrectly.
POOR PICTURE ORSOUND
Ensure you haveset the player's Audio settings correctly
Ensure the discis not scratchedor stained.
Disc Error Displayed
Ensure the discis not warped, damaged or deformed.
Ensure the discis not badlystained or damaged.
Ensure the discformat is compatiblewith the player.
Please check whetheryou have triedto play asoftware CD. If so, please restartthe
player.
REMOTE NOT WORKING
Make sure theMain unit's POWER buttonis on.
Ensure the remotebatteries are working.
Point the remotecontrol directly atthe player's IR sensor.
Remove any obstaclesbetween the remoteand the IRsensor.
UNIT NOT WORKING
Turn offthe power, and then turn it on again.
"NO DISC" DISPLAYED
Ensure you haveput the disc on thetray.
Ensure the discis not upsidedown.
Ensure the discis not distorted, stained or scratched.
-24-
TROUBLESHOOTING
Potential Issues
Inspection Check
Picture
Audio
Check theAntenna Position
and that itis connected
Snow
Ghost
Noise
Check AntennaPosition and
that it isconnected correctly
Normal audio
Check for electrical
interference
Interference
Noise
Check if mutefunction is on.
Check AV cables are
connected.
Normal Picture
Mute
Check is connectedand on
Check Cable connections
Adjust Contrast, Brightness
and Volume Settings
No picture
No colour
Mute
Normal audio
Check TV ColourSettings
Conduct a ChannelRescan
Picture
Breaking Up
Normal Audio
or Weak
Irregular
Irregular
Check AV/Video settings
Check Antennaconnection
No Colour
Mosaic
Check Video Cables
connected firmly.
No Display
Normal audio
-25-
INTRODUCTION
Model: IDLED2202DVD
LED LCD :
Screen Size:
21.6 inch
Resolution
1366x768
16:9
Aspect Ratio
Display colours
16.2M
Brightness
250 CD/M2
1000:1
Contrast ratio
Response time
10 ms
View angle
160(H)/160(V)
TV:
Digital TV: DVB-T
Analog TV: PAL/SECAM
TV system
Audio: MPEG2Audio Layer I&II
Video: MPEG2 Transport MP@HL
DVB-T decode
Demodulator : COFDM
DVB-T de-modulation
OFDM Mod.: 2K, 8K FFT, SFN andMFN
Packed Carries: 2K/8K
Guard Interval: 1/4, 1/8, 1/16, 1/32
Terminals:
x2
x1
x1
x1
HDMI Input
VGA Input
PC audio input
AV input
USB Input
x1
x1
x1
YPbPr input
AV Output
Others:
Power supply
DC 12V, 3A(Power adaptor supplied)
2 X 3W
)
Audio Output Power THD 7%
)
-26-
INTRODUCTION
Model: IDLED2402DVD
LED LCD :
Screen Size:
23.6 inch
Resolution
1920x1080
16:9
Aspect Ratio
Display colours
16.2M
Brightness
250 CD/M2
1000:1
8 ms
Contrast ratio
Response time
View angle
160(H)/160(V)
TV:
Digital TV: DVB-T
Analog TV: PAL/SECAM
TV system
Audio: MPEG2 Audio Layer I&II
Video: MPEG2 Transport MP@HL
DVB-T decode
Demodulator : COFDM
DVB-T de-modulation
OFDM Mod.: 2K, 8K FFT, SFN and MFN
Packed Carries: 2K/8K
Guard Interval: 1/4, 1/8, 1/16, 1/32
Terminals:
x2
x1
x1
x1
HDMI Input
VGA Input
PC audio input
AV input
USB Input
x1
x1
x1
YPbPr input
AV Output
Others:
Power supply
DC 12V, 3A(Power adaptor supplied)
2 X 3W
)
Audio Output Power THD 7%
)
-27-
WARRANTY
Please keep yourreceipt as proofof purchase. This product iswarranted for any
defect in materialsor workmanship This product iswarranted for anydefects in the
materials or workmanshipfor a periodof 12 monthsafter the originaldate of purchase.
after the originaldate of purchase. This product is for normaldomestic and office use
only. This warranty does not coverdamage from misuseor neglect, accidental
damage, vermin infestation, excessive voltages suchus lightning orpower surges or
any alternation thataffects the performance or reliabilityof the product.
In the unlikelyevent that yourproduct fails towork normally, please contactthe Bush
Warranty on 1800 509 394(Australia) or 0800450 259 (NewZealand) and haveyour
receipt of purchaseon hand.
This warranty issubject to thefollowing provisions:
It is onlyvalid within boundariesof the countryof purchase;
The product must be correctlyassembled and operatedin accordance withthe
instructions contained inthe manual;
This product must be usedsolely for domesticpurposes;
The warranty does not coveraccidental damage;
The warranty will be renderedinvalid if theproduct is resoldor has beendamaged
by inexpert repair;
The manufacturer disclaims any liabilityfor incidental orconsequential damaged.
This warranty isin addition to, and does notdiminish, your statutoryor legal rights.
PO BOX 6287
Silverwater NSW 1811
Bush Warranty: 1800 509 394Australia
Bush Warranty: 0800 450 259New Zealand
-28-
|