Belkin Computer Keyboard F8E839UKBNDL User Manual

Wireless Keyboard and  
Optical Mouse Bundle  
Enjoy web surfing and total media control  
with 19 smart hot keys  
User Manual  
F8E839ukBNDL  
 
98uk_F8E839ukBNDL_man.indd  
1
15/10/04 5:47:17  
TABLE OF CONTENTS  
Introduction  
Compatible Equipment  
1
2
2
2
3
4
5
7
8
Operating Systems  
Package Contents  
Quick Installation Guide for PS/2 Connection  
Software Installation for Windows 98, Me, 2000, and XP  
Troubleshooting  
Uninstallation process for Windows 98, Me, 2000, and XP  
Information  
 
98uk_F8E839ukBNDL_man.indd  
3
15/10/04 5:47:17  
 
98uk_F8E839ukBNDL_man.indd  
4
15/10/04 5:47:17  
INTRODUCTION  
Congratulations and thank you for purchasing the Wireless Keyboard  
and Optical Mouse bundle from Belkin. We appreciate your business  
and are sure you will enjoy years of reliable use with these high-  
quality, input devices. Please review this entire User Manual  
so you can be sure to get the most reliable performance from your  
new equipment.  
1
 
98uk_F8E839ukBNDL_man.indd  
1
15/10/04 5:47:17  
INTRODUCTION  
Compatible Equipment  
Works with all PCs that are compatible with IBM® and equipped with  
PS/2 interface  
NOTE: Use of these products on a desk made of iron, or other  
metal, will negatively impact the operation of your Wireless  
Keyboard and Mouse.  
Operating Systems  
Windows XP, Me, 2000, 98 SE, 95  
Package Contents  
Wireless Keyboard  
Wireless Optical Mouse  
Receiver  
4 AA batteries  
User Manual  
Driver CD  
Please read the instructions for installing, operating, and using  
the wireless desktop.  
2
 
98uk_F8E839ukBNDL_man.indd  
2
15/10/04 5:47:17  
QUICK INSTALLATION GUIDE FOR  
PS/2 CONNECTION  
1. Be sure that your computer is powered off.  
2. Connect the receiver to your computer’s PS/2 port. The receiver  
has a 2-head connector for the Keyboard and Mouse connections  
(purple is for the Keyboard and the USB connection; the green is  
for the Mouse). There is also an illustration on the top connector  
to identify them. If your computer does not use the same color  
scheme, match the plug with the illustration next to the port.  
3. Install the batteries into your Keyboard and Mouse. Please make  
sure you follow the indication on the inside compartment for  
correct positioning of the batteries.  
4. Power on your computer.  
5. To set up the wireless mouse and keyboard links, press the  
connection button on the receiver. Then press the connection  
button on the mouse that is located on the bottom and hold for  
several seconds. Press the connection button on the keyboard  
(located under the foot of the keyboard) and hold for several  
seconds. The indicator light on the receiver will flash until the  
channel has been selected. When the indicator light stops flashing,  
your keyboard and mouse will be operational.  
3
 
98uk_F8E839ukBNDL_man.indd  
3
15/10/04 5:47:17  
SOFTWARE INSTALLATION FOR  
WINDOWS 98, ME, 2000, AND XP  
Note: The Keyboard and Mouse should now be functioning.  
If they are not, repeat the setup instructions and refer to the  
Troubleshooting” section for help. When the Mouse and  
Keyboard are operational, the software can be installed.  
Warning: It is recommended that you uninstall any previously installed  
keyboard and mouse software prior to installing your  
new Belkin software.  
1. Be sure your computer is powered on.  
2. Insert the CD into your computer’s CD-ROM drive.  
3. If you have not previously installed Keyboard and Mouse software,  
click “OK” and the installation will begin. Follow the on-screen  
instructions.  
4. Upon completion of installation, you will be prompted to restart  
your computer. You must restart at this time in order for the  
software to function.  
5. The setting icons of the keyboard and mouse will appear on  
the taskbar of windows - Double click the icons to set the  
programmable mouse button and the keyboard hot key functions.  
4
 
98uk_F8E839ukBNDL_man.indd  
4
15/10/04 5:47:17  
TROUBLESHOOTING  
The Keyboard and/or Mouse is/are not detected or do not  
work after installation.  
• Make sure the receiver cables are plugged into the computer’s PS/2  
port.  
• For optimal performance, place the receiver at least eight inches  
(20cm) away from the computer monitor, the computer, any external  
storage devices, or other electrical devices.  
• Make sure you have properly installed the batteries. Test the  
batteries to make sure they are not dead (you can do this by  
installing them into another device).  
You may have other system devices that are conflicting with the  
Mouse and/or the Keyboard. Check the IRQ/address setting of  
these devices for conflicts and change the settings as required.  
Please refer to your computer documentation or the manufacturer’s  
technical support for assistance in making these changes.  
• Make sure you have properly established communication/  
synchronization between the receiver and the Mouse and Keyboard.  
5
 
98uk_F8E839ukBNDL_man.indd  
5
15/10/04 5:47:17  
TROUBLESHOOTING  
• If your Mouse pointer becomes choppy on-screen or the Keyboard  
does not register keystrokes, replace batteries swith a fresh set.  
• When multiple wireless keyboard and mouse sets are used in a  
close proximity, interference might occur. You can solve this by  
changing the communication channel of your keyboard and mouse.  
To change the channel of the wireless keyboard and mouse, press  
the connection button on the receiver. Then press the connection  
button on the mouse that is located on the bottom and hold for  
several seconds. Press the connection button on the keyboard  
(located under the foot of the keyboard) and hold for several  
seconds. The indicator light on the receiver will flash until the new  
channel has been selected.  
6
 
98uk_F8E839ukBNDL_man.indd  
6
15/10/04 5:47:17  
UNINSTALLATION PROCESS FOR  
WINDOWS 98, ME, 2000, AND XP  
1. Select “Setting”.  
2. Select “Control Panel”.  
3. Select “Add/Remove Programs”.  
4. Select “Belkin Wireless Driver,” then click on “Add Remove”.  
5. You will be asked if you are sure if you want to remove the selected  
application and all of its components. Click on “Yes”.  
The uninstall process will begin. Follow the on-screen instructions to  
complete the process.  
7
 
98uk_F8E839ukBNDL_man.indd  
7
15/10/04 5:47:17  
INFORMATION  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under  
our sole responsibility that the product,  
F8E839ukBNDL  
to which this declaration relates,complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
CE Declaration of Conformity  
We, Belkin Corporation, declare under our sole responsibility, that the F8E832-BNDL to  
which this declaration relates, is in conformity with EN55022, EN61000-3-2, EN61000-3-3,  
and EN55024.  
Caution: Exposure to Radio Frequency Radiation.  
The radiated output power of this device is far below the FCC radio frequency exposure  
limits. Nevertheless, the device shall be used in such manner that the potential for human  
contact normal operation is minimized.  
When connecting an external antenna to the device, the antenna shall be placed in such  
a manner to minimize the potential for human contact during normal operation. In order to  
avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity  
to the antenna shall not be less than 20cm (8inches) during normal operation.  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy. If not installed  
and used in accordance with the instructions, it may cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try and correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the distance between the equipment and the receiver.  
• Connect the equipment to an outlet on a circuit different from that to which  
the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
8
 
98uk_F8E839ukBNDL_man.indd  
8
15/10/04 5:47:18  
INFORMATION  
Modifications  
The FCC requires the user to be notified that any changes or modifications to this device that  
are not expressly approved by Belkin Components may void the users authority to operate  
the equipment.  
Belkin Corporation Limited Lifetime Product Warranty  
Belkin Corporation warrants this product against defects in materials and workmanship for  
its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product  
at no charge provided it is returned during the warranty period, with transportation charges  
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of  
purchase may be required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse,  
or misapplication; if the product has been modified without the written permission of Belkin;  
or if any Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF  
ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN  
SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT  
LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE.  
No Belkin dealer, agent, or employee is authorised to make any modification, extension, or  
addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER  
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME,  
GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING ANY PROGRAM OR  
DATA STORED IN, OR USED WITH, BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or consequential damages  
or exclusions of implied warranties, so the above limitations of exclusions may not apply to  
you. This warranty gives you specific legal rights, and you may also have other rights that  
vary from state to state.  
9
 
98uk_F8E839ukBNDL_man.indd  
9
15/10/04 5:47:18  
INFORMATION  
Canada- Industry Canada (IC)  
The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.  
This Class B digital complies with Canadian ICES-003.  
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.  
Europe-European Union Notice  
Radio products with the CE 0560 or CE alert marking comply  
with the R&TTE Directive (1995/5/EC) issued by the Commission  
of the European Community.  
Compliance with this directive implies conformity to the following  
European Norms (in brackets are the equivalent international standards).  
• EN 60950 (IEC60950) – Product Safety  
• EN 300 328 Technical requirement for radio equipment  
• ETS 300 826 General EMC requirements for radio equipment.  
To determine the type of transmitter, check the identification label  
on your Belkin product.  
Products with the CE marking comply with the EMC Directive (89/336/EEC) and the  
Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.  
Compliance with these directives implies conformity to the following European Norms  
(in brackets are the equivalent international standards).  
• EN 55022 (CISPR 22) – Electromagnetic Interference  
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity  
• EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics  
• EN 61000-3-3 (IEC610000) – Power Line Flicker  
• EN 60950 (IEC60950) – Product Safety  
Products that contain the radio transmitter are labeled with CE 0560 or CE alert marking  
and may also carry the CE logo.  
10  
 
98uk_F8E839ukBNDL_man.indd 10  
15/10/04 5:47:18  
11  
 
98uk_F8E839ukBNDL_man.indd 11  
15/10/04 5:47:19  
Belkin Corporation  
501 West Walnut Street  
Compton • CA • 90220-5221 • USA  
Tel: +1 310 898 1100  
Fax: +1 310 898 1111  
Belkin Ltd.  
Express Business Park  
Shipton Way • Rushden  
NN10 6GL • United Kingdom  
Tel: +44 (0) 1933 35 2000  
Fax: +44 (0) 1933 31 2000  
Belkin B.V.  
Boeing Avenue 333  
1119 PH Schiphol-Rijk • The Netherlands  
Tel: +31 (0) 20 654 7300  
Fax: +31 (0) 20 654 7349  
Belkin GmbH  
Hanebergstrasse 2  
80637 Munich • Germany  
Tel: +49 (0) 89 143405 0  
Fax: +49 (0) 89 143405 100  
Belkin SAS  
5 Rue du Petit Robinson  
3ème étage  
78350 Jouy en Josas • France  
Tel: +33 (0) 1 34 58 14 00  
Fax: +33 (0) 1 39 46 62 89  
Belkin Tech Support  
Europe: 00 800 223 55 460  
US: 877 736 5771  
© 2004 Belkin Corporation. All rights reserved.  
All trade names are registered trademarks of respective manufacturers listed.  
P74598uk  
 
98uk_F8E839ukBNDL_man.indd 12  
15/10/04 5:47:20  

Beko Washer WMB 51021 W User Manual
Bel Canto Design Stereo Amplifier PRe6 User Manual
Belkin Server LH 4 User Manual
Best Ventilation Hood K41 User Manual
Bosch Appliances Oven PGL985UC User Manual
Broilmaster Gas Grill T3C 1 User Manual
Canon Fax Machine L380S User Manual
Canon Scanner 3297B002 User Manual
CFM Fan 165834 User Manual
Chrysler Automobile 2007 Sebring Sedan User Manual