RM7000A-R2
RM7001A-R2
RM7002
RM7003A-R2
RM7004A-R2
RM7005A-R2
RM7006
RM7007
RM7008A-R2
RM7010
4-Post Steel Open Racks
These 15U, 22U, 37U, 42U, and 51U racks provide
exceptional stability.
Hold up to 2200 pounds of equipment.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
Customer
Support
Information
Chapter 1: Specifications
1. Specifications
Exterior Height — RM7000A-R2: 80.5" (204.5 cm);
RM7001A-R2: 45.5" (115.6 cm);
RM7003A-R2: 33.25" (84.5 cm);
RM7004A-R2: 96" (243.8 cm);
RM7005A-R2: 108" (274.3 cm);
RM7008A-R2: 72" (183 cm)
Exterior Width — 20.6" (52.3 cm)
Exterior Depth — 29" (73.7 cm)
Rack Units — RM7000A-R2: 42U;
RM7001A-R2: 22U;
RM7003A-R2: 15U;
RM7004A-R2: 51U;
RM7005A-R2: 58U;
RM7008A-R2: 37U
Interior Width — 19" (48.3 cm)
Weight — RM7000A-R2: 80 lb. (36.4 kg);
RM7001A-R2: 65 lb. (29.5 kg);
RM7003A-R2: 60 lb. (27.3 kg);
RM7004A-R2: 94 lb. (42.7 kg);
RM7005A-R2: 101 lb. (45.9 kg);
RM7008A-R2: 79 lb. (35.8 kg)
Page 3
724-746-5500 | blackbox.com
Chapter 2: Overview
2. Overview
2.1 Introduction
The 4-Post Steel Open Rack combines the stability of a cabinet with the airflow
of an open rack. It’s made of 12-gauge steel and supports up to 2200 pounds
(1000 kg) of equipment. The rack conforms to EIA standards for 19" equipment
mounting and has universal M6 holes. The rack is labeled with rack units.
Mounting hardware is included.
Choose from six rack models. They are 19" wide and are available in the six
heights listed below:
• RM7003A-R2 (15U)
• RM7001A-R2 (22U)
• RM7008A-R2 (37U)
• RM7000A-R2 (42U)
• RM7004A-R2 (51U)
• RM7005A-R2 (58U)
2.2 What’s Included
• (2) 15U, 22U, 37U, 42U, 51U, or 58U uprights, right hand
• (2) 15U, 22U, 37U, 42U, 51U, or 58U uprights, left hand
• (4) 23"D horizontal depth brackets
• (4) top/bottom horizontal width brackets
• (16) 3⁄8-16 x 3⁄4" long flat head screws, hex drive
• (16) 1⁄2"-13 x 1" hex head bolts, black oxide, wax coat, RoHS compliant
• (16) 1⁄2" split lockwashers, black oxide, wax coat, RoHS compliant
• (16) 1⁄2"-13 finished hex nuts, black oxide, wax coat, RoHS compliant
• (50) M6 metric threaded universal mounting cage nuts
• (50) M6 x 12 mm long metric threaded Phillips head screws, black
Page 4
724-746-5500 | blackbox.com
Chapter 2: Overview
2.3 Optional Accessories
• Baying Kit (RM7002)
• RM7000A-R2 Series Caster Set (RM7006)
• RM7000A-R2 Series Flat Top (RM7007)
• Fixed Vented Shelf, 28.9"D, 50-lb. Capacity (RM7010)
• Fixed Vented Server Shelf, 271⁄4"D, 150-lb. Capacity (RM403)
• Fixed Vented Server Shelf, 30"D, 150-lb. Capacity (RM410)
Page 5
724-746-5500 | blackbox.com
Chapter 3: Assembly Instructions
3. Assembly Instructions
Tools You Will Need
• 3⁄4" socket
• 3⁄4" wrench
• 7⁄32" hex key wrench
Step 1: Assembling the Bottom Corners of the Rack
A. Lay the left-hand and right-hand uprights on end, facing each other.
KEY:
1. Right-hand upright
2. Left-hand upright
1
2
Figure 3-1. Uprights.
B. Align the through holes in one top/bottom horizontal width bracket (#3 in
Figure 3-2) with the through holes in one left-hand upright (#1 in Figure 3-2).
Install (2) 3⁄8"-16 x 3⁄4" long flat head screws (see #4 in Figure 3-2) through the
holes on the upright and the threaded holes on the horizontal width bracket
(#3).
Page 6
724-746-5500 | blackbox.com
Chapter 3: Assembly Instructions
7
2
1
5
6
7
Through
holes
4
Threaded
holes
3
KEY:
1. Left-hand upright
2. Horizontal depth bracket
3. Horizontal width bracket
4. 3⁄8-16 x 3⁄4" long flat head screw
5. 1⁄2-13 x 1" hex head bolt
6. 1⁄2" split lockwasher
7. 1⁄2-13 finished hex nut
Figure 3-2. Assembling the rack corners.
Page 7
724-746-5500 | blackbox.com
Chapter 3: Assembly Instructions
C. Align the through holes in one top/bottom horizontal depth bracket (#2 in
Figure 3-2) with the through holes on the opposite side of the upright in Step
1B (#1 in Figure 3-2). Install (2) 1⁄2"-13 x 1" hex head bolts, lockwashers, and
(2) 1⁄2-13 finished hex head nuts (see #5, #6, and #7 in Figure 3-2).
D. Align the through holes on the other side of the horizontal width bracket in
Step 1B (#3 in Figure 3-2) with the through holes in one right-hand upright (#1
in Figure 3-1).
E. Repeat steps A–D for the remaining left- and right-hand uprights (#1 and #2 in
Figure 3-1), horizontal width bracket (#3 in Figure 3-2), and horizontal depth
bracket (#2 in Figure 3-2).
Step 2: Assembling the Top Corners of the Rack
A. Stand the bottom corner assembly from Step 1 with the horizontal width and
depth brackets’ bottom edges flat on the floor.
B. Repeat Steps 1B through 1E for the remaining two top/bottom horizontal width
brackets and the two top/bottom horizontal depth brackets. See Figure 3-2.
Step 3: Final Tightening
Square the unit using a level or carpenter square. Tighten all bolts using a 3⁄4
"
socket and/or wrench.
Step 4: Secure the Rack to the Floor
CAUTION: Before installing equipment in the rack, bolt it to the floor, or to an
equally stable and secure surface before installing any equipment.
Page 8
724-746-5500 | blackbox.com
Chapter 3: Assembly Instructions
Step 5: Installing the Optional Accessories
Installing the Flat Top
Flat top
Front of
Rack
Figure 3-3. Installing the flat top.
Installing the Casters
If you don’t want to secure the rack to the floor, you can use optional casters
(RM7006) that install on the bottom of the rack.
Page 9
724-746-5500 | blackbox.com
NOTES
Page 10
724-746-5500 | blackbox.com
NOTES
Page 11
724-746-5500 | blackbox.com
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 30 seconds away at
724-746-5500 or blackbox.com.
About Black Box
Black Box provides an extensive range of networking and infrastructure products.
You’ll find everything from cabinets and racks and power and surge protection
products to media converters and Ethernet switches all supported by free, live 24/7
Tech support available in 30 seconds or less.
© Copyright 2012. Black Box Corporation.
RM7000A-R2, version 3
724-746-5500 | blackbox.com
|