Radio / CD
Porto CD34
San Remo CD34
7 644 191 310
7 644 176 310
Operating instructions
1
2
5
6
3
4
10
9
8
7
11
3
CONTROLS
1
2
button for opening the de-
tachable control panel (flip-re-
lease panel)
6
SRC button to switch between
CD, CD changer (if connected)
and AUX.
: Briefly display the clock
time.
Button to switch the device on/
off and operate the volume mute
feature
7
8
Arrow buttons
3
4
Volume control
MENU button to open the basic
settings menu
BND button (band) to select ra-
dio mode as the source,
to select the FM memory banks
and the MW and LW wavebands
TS to start the Travelstore func-
tion
9
:
Keys 1 - 6
TRAF button to switch traffic in-
formation standby on/off.
RDS button to switch the RDS
function on/off (Radio Data Sys-
tem).
5
AUDIO button to adjust the
bass, treble, balance and fader.
To select an equalizer preset.
For adjusting the X-BASS func-
tion and activating/deactivating
it.
;
button to eject the CD from
the device
27
CONTENTS
Notes and accessories .......... 29 CD mode ................................ 40
Road safety ................................... 29 Switching to CD mode .................. 40
Installation ..................................... 29 Selecting tracks ............................ 40
Accessories .................................. 29 Fast track selection ....................... 40
Fast searching (audible) ................ 40
Random track play (MIX) ............... 40
Scanning tracks (SCAN) ............... 41
Repeating tracks (REPEAT) ........... 41
Pausing playback (PAUSE)............ 41
Configuring the display .................. 41
Displaying CD text......................... 41
Traffic announcements in CD mode. 42
Ejecting a CD ................................ 42
Detachable control panel
(flip-release panel)................. 30
Switching on/off .................... 31
Adjusting the volume ............. 32
Setting the power-on volume ......... 32
Instantaneously decreasing the
volume (mute)................................ 33
Switching the confirmation beep
on/off ............................................ 33
Mute while telephoning .................. 33
CD-changer mode ................. 43
Switching to CD-changer mode..... 43
Selecting CDs............................... 43
Selecting tracks ............................ 43
Fast searching (audible) ................ 43
Configuring the display .................. 43
Repeating individual tracks or
whole CDs (REPEAT).................... 43
Random track play (MIX) ............... 44
Scanning all tracks on all CDs
Radio mode............................ 34
Switching to radio mode ................ 34
Convenient RDS functions............. 34
Selecting the waveband /
memory bank................................. 34
Tuning into a station....................... 35
Setting the sensitivity of station
seek tuning.................................... 35
Storing stations ............................. 36
Storing stations automatically
(SCAN) ......................................... 44
Pausing playback (PAUSE)............ 44
(Travelstore) .................................. 36
Listening to stored stations ............ 36
Scanning receivable stations
(SCAN) ......................................... 36
Setting the scanning time .............. 36
Programme type (PTY) .................. 37
Optimising radio reception............. 38
Configuring the display .................. 38
CLOCK - Time ........................ 45
Sound..................................... 46
X-BASS .................................. 47
Configuring the level display . 48
External audio sources .......... 48
Specifications ........................ 49
Traffic information.................. 39
28
NOTES AND ACCESSORIES
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Installation
If you want to install your car sound sys-
tem yourself, please read the installa-
tion and connection instructions that
follow these operating instructions.
Please read these operating instruc-
tions before using the equipment for
the first time.
Accessories
Only use accessories approved by Blau-
punkt.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the device,
please contact your dealer or the tele-
phone hotline for your country. You will
find the telephone number printed at the
back of this booklet.
Remote control
The optional RC08 or RC10 remote
control allows you to access the most
important functions of your car sound
system safely and conveniently from
your steering wheel.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
or ask for them directly at:
Amplifiers
You can use all Blaupunkt and Velocity
amplifiers.
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 08, IDC A 09 and CDC A 03.
Blaupunkt GmbH, Hotline CM/PSS,
Robert Bosch Str. 200,
D-31139 Hildesheim
Germany
Compact Drive MP3
Road safety
You can connect the Compact Drive
MP3 instead of a CD-changer in order
to play MP3 music tracks. If you decide
to connect a Compact Drive MP3, you
will first need to use a computer to store
the MP3 music tracks on the Micro-
drive™ hard disk that is inside the Com-
pact Drive MP3. Then, when the Com-
pact Drive MP3 is connected to the car
sound system, you can play the tracks
like normal CD music tracks. You can
operate the Compact Drive MP3 in the
same way as a CD changer. Most of
the CD-changer functions can also be
used with the Compact Drive MP3.
Road safety has absolute prior-
ity. Only operate your car sound sys-
tem if the road and traffic conditions
allow you to do so. Familiarise your-
self with the device before setting off
on your journey.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, listen to
your car sound system at a reason-
able volume level during your jour-
ney.
29
DETACHABLE CONTROL PANEL
Detachable control panel
(flip-release panel)
Theft protection
The device is equipped with a detacha-
ble control panel (flip-release panel) as
a way of protecting your equipment
against theft. The device is worthless
to a thief without this control panel.
Note:
● The device will switch off after a
particular time period configured by
you. For further details, read the
section entitled “OFF TIMER” in
this chapter.
Protect your device against theft by tak-
ing the control panel with you whenev-
er you leave your vehicle. Do not leave
the control panel inside your vehicle -
not even in a hiding place.
● All the current settings are saved.
● Any CD already inserted in the de-
The control panel has been designed
to be easy to use.
vice remains there.
Attaching the control panel
Note:
● Never drop the control panel.
● Hold the control panel at approxi-
● Never expose the control panel to
direct sunlight or other heat sourc-
es.
mately right angles to the device.
● Slide the control panel into the de-
vice’s guides that are positioned on
the left and right at the lower edge
of the housing. Push the control
panel carefully into the bracket until
it clicks into place.
● Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, clean the contacts with
a lint-free cloth and some alcohol.
Detaching the control panel
● Flip up the control panel and care-
fully press it into the device until it
clicks into place.
● Press the
button 1.
The control panel opens out towards
you.
● Hold the control panel by its right
side and then pull the control panel
straight out of the bracket.
2.
1.
30
CONTROL PANEL
SWITCHING ON/OFF
Note:
Switching on/off
There are various ways of switching the
device on/off:
● When attaching the control panel,
make sure you do not press the
display.
Switching the device on/off using
the vehicle ignition
If the device was still switched on when
you removed the control panel, it will
automatically switch on with the last
settings activated (i.e. radio, CD, CD
changer or AUX) when the panel is re-
placed.
If the device is correctly connected to
the vehicle’s ignition and you did not
switch it off by pressing button 2, the
device will switch on/off simultaneously
with the ignition.
Off timer
Switching the device on/off using
the detachable control panel
After you detach the control panel, the
device will switch off after a preset time
period. You can set this time to between
0 and 30 seconds.
● Detach the control panel.
The device switches off.
● Press the MENU button 8.
Note:
● Press the or button 7 re-
peatedly until “OFF TIMER” ap-
pears in the display.
● The device will switch off after a
preset time period. For further de-
tails, read the section entitled “Off
timer”.
● Adjust the time using the
tons 7.
but-
● Attach the control panel again.
When you have finished making your
changes,
The device switches on. The last set-
ting (radio, CD, CD changer orAUX) will
be reactivated.
● press the MENU button 8 twice.
Switching on/off using button 2
Note:
● If you set the off-timer to 0 sec-
onds, the device will switch off im-
mediately as soon as you open the
control panel.
● To switch on the device, press but-
ton 2.
● To switch off the device, press and
hold down button 2 for longer
than two seconds.
The device switches off.
Note:
● To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
31
SWITCHING ON/OFF
ADJUSTING THE VOLUME
Adjusting the volume
Switching on by inserting a CD
If the device is switched off and there is
no CD present in the drive,
You can adjust the volume in steps from
0 (off) to 66 (maximum).
● press the
button 1.
To increase the volume,
The flip-release panel opens.
● turn the volume control 3 clock-
● Gently insert the CD with its printed
side uppermost into the drive until
you feel some resistance.
wise.
To decrease the volume,
● turn the volume control 3 anti-
The drive draws in the CD automatical-
ly.
clockwise.
Setting the power-on volume
You can set the device’s default power-
on volume.
You must not hinder or assist the drive
as it draws in the CD.
● Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “ON VOLUME” ap-
pears in the display.
The device switches on and starts play-
ing the CD.
Note:
● Adjust the power-on volume using
● If the ignition was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 2 in order to
start playing the CD.
the
buttons 7.
To help you adjust the setting more eas-
ily, the device will increase or decrease
the volume as you make your changes.
If you change the setting to “LAST VOL”,
the volume when the device switches
on will be the same as the volume level
that was set the last time you switched
the device off.
Note:
● To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
than this when the device was last
switched off and the “LAST VOL”
setting is activated, the system will
reset the volume to “38” when you
switch the device on again.
32
ADJUSTING THE VOLUME
When you have finished making your
changes,
Switching the confirmation beep
on/off
● press the MENU button 8 twice.
The system will output a confirmation
beep for some functions if you keep a
button pressed down for longer than two
seconds, for instance, when assigning
a radio station to a station preset but-
ton. You can switch the beep on/off.
Instantaneously decreasing the
volume (mute)
You can instantaneously decrease the
volume (mute) to a level preset by you.
● Briefly press button 2.
● Press the MENU button 8.
“MUTE” appears in the display.
● Press the or button 7 re-
peatedly until “BEEP” appears in
the display.
Cancelling mute
To return to your previously set volume
level,
● Configure the beep using the
buttons 7. “OFF” means the beep
is off and “ON” means the beep is
switched on.
● briefly press button 2 again.
Setting the mute level
When you have finished making your
changes,
You can set the device’s mute volume
level.
● press the MENU button 8.
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “MUTE LVL” appears
in the display.
Mute while telephoning
If your car audio system is equipped with
a mobile telephone, it will automatically
switch to mute when you use the phone.
This will only work if the mobile phone
is connected to the car audio system
as described in the installation instruc-
tions.
● Adjust the mute level using the
buttons 7.
When you have finished making your
changes,
● press the MENU button 8 twice.
The volume will be reduced to the con-
figured volume mute level.
33
RADIO MODE
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
Note:
● REGIONAL must be activated/de-
activated separately in the menu.
Switching REGIONAL on/off
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “REG” appears in the
display. “OFF” or “ON” is displayed
alongside “REG”.
The station name appears in the dis-
play as soon as the tuner receives it.
Switching to radio mode
If you are in CD, CD changer or AUX
mode,
● To switch REGIONAL on/off, press
the or button 7.
● Press the MENU button 8.
● press the BND•TS button 4.
or
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
● press the SRC ( ) button 6 re-
peatedly until the memory bank
(e.g. “FM1”) appears in the display.
● press and hold down the TRAF/
RDS button : for longer than two
seconds.
Convenient RDS functions
The convenient RDS functions AF (Al- The RDS functions are active when an
ternative Frequency) and REGIONAL RDS symbol lights up in the display.
extend your radio’s range of functions.
Selecting the waveband /
● AF: If you activate this RDS func-
memory bank
tion, the radio automatically tunes
This device can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) wave-
bands. There are three memory banks
available for the FM waveband (FM1,
FM2 and FMT) and one for each of the
MW and LW wavebands.
into the best receivable frequency
for the station that is currently set.
● REGIONAL: At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REGIONAL function to pre-
vent the car radio from switching to
alternative frequencies that are
transmitting different programme
content.
Six stations can be stored in each mem-
ory bank.
34
RADIO MODE
To switch between the FM memory Note:
banks (FM1, FM2 and FMT) and the ● When using this feature, you will
MW and LW wavebands,
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the Scan or Travelstore func-
tion.
● briefly press the BND•TS button
4.
Tuning into a station
There are various ways of tuning into a
station.
Setting the sensitivity of station
seek tuning
Automatic station seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
● Press the or button 7.
The radio tunes into the next receiva-
ble station.
● Press the MENU button 8.
Tuning into stations manually
● Press the or button 7 re-
peatedly until “SENS” appears in
the display.
You can also tune into stations manual-
ly.
Note:
● Press the button 7.
● You can only tune into stations
manually if the RDS function is de-
activated.
The display shows the currently set sen-
sitivity level. “SENS HI6” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
● Press the or button 7.
Browsing through broadcasting
networks (only FM)
● Set the sensitivity level that you
want using the
buttons 7.
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
When you have finished making your
changes,
● press the MENU button 8.
Note:
Note:
● The RDS function must be activat-
ed before you can use this feature.
● You can set different sensitivity lev-
els for FM and MW or LW (AM).
● Press the or button 7 to
switch to the next station on the
broadcasting network.
35
RADIO MODE
Storing stations
Listening to stored stations
● Select the memory bank or wave-
Storing stations manually
band.
● Select the memory bank (i.e. FM1,
FM2, FMT) that you want or one of
the wavebands (MW or LW).
● Press the station button 1 - 6 9
that corresponds to the station that
you want to listen to.
● Tune into the station that you want.
Scanning receivable stations
(SCAN)
You can use the scan function to briefly
play all the receivable stations. You can
set the scanning time in the menu to
between 5 and 30 seconds.
● Press and hold down one of the
station buttons 1 - 6 9 for longer
than two seconds to assign the sta-
tion to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Starting SCAN
● Press and hold down the MENU
button 8 for longer than two sec-
onds.
Scanning begins. “SCAN” appears
briefly in the display followed by a flash-
ing display of the current station name
or frequency.
Note:
● Any stations that were previously
stored in this memory bank are de-
leted in the process.
● Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
Cancelling SCAN and continuing
listening to a station
● Press the MENU button 8.
Scanning stops and the radio continues
playing the station that it tuned into last.
The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
Setting the scanning time
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “SCAN TIME” ap-
pears in the display.
● Set the scanning time that you
want using the
buttons 7.
36
RADIO MODE
When you have finished making your ● If the tuned radio station or another
changes,
station on the broadcasting net-
work broadcasts your selected pro-
gramme type at a later point in
time, the radio will automatically
switch from the currently tuned sta-
tion or from CD mode or CD-
changer mode to the station whose
programme type matches the one
you selected.
● press the MENU button 8 twice.
Note:
● The scanning time that you set is
also applied by the system to scan-
ning carried out in CD and CD-
changer mode.
Programme type (PTY)
Switching PTY on/off
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your car radio can
receive and display this information.
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “PTY ON” or “PTY
OFF” appears in the display.
For example, the programme types can
be:
● Press the or button 7 to
switch PTY ON or OFF.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
● Press the MENU button 8.
Selecting the PTY language
CLASSICS
You can select the language in which
the programme types are displayed.
You can use the PTY function to select
stations of a particular programme type.
The
“DEUTSCH”,
“FRANÇAIS”.
following
are
“ENGLISH”
available:
and
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “PTY LANG” appears
in the display.
Note:
● If the tuner does not find a station
that corresponds to the selected
programme type, you will hear a
beep and “NO PTY” appears briefly
in the display. The radio will then
retune to the station that it received
last.
● Set your preferred language using
the
buttons 7.
When you have finished making your
changes,
● press the MENU button 8 twice.
37
RADIO MODE
“HICUT 0” means that no automatic re-
duction of the treble and interference
level will be made; “HICUT 1” means
that a maximum reduction will be made.
Selecting a programme type and
starting seek tuning
● Press the or button 7.
The current programme type appears
in the display.
● Press the MENU button 8.
Configuring the display
● If you want to select another pro-
gramme type, you can do so by
pressing the or button 7
whilst this display is visible.
In radio mode you have the option of
displaying the waveband together with
the memory location and the time or the
station name.
The selected programme type appears
briefly in the display.
● Press the MENU button 8.
● Press the or button 7 to
● Press the or button 7 re-
peatedly until “TUN DISP” appears
in the display.
start seek tuning.
The radio will then tune into the next
station that it finds that corresponds to
your selected programme type.
● Press the or button 7 to
switch between “CLOCK” and
“FREQUENCY”.
Optimising radio reception
Select “FREQUENCY” if you want to
display the station name / frequency.
Treble reduction feature during
interference (HICUT)
● Press the MENU button 8 twice.
The HICUT function improves reception
during poor radio reception (only FM).
If interference occurs, the system auto-
matically reduces the treble thus reduc-
ing the interference level.
Switching HICUT on/off
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “HICUT” appears in
the display.
● Press the or button 7 to ad-
just the HICUT setting.
38
TRAFFIC INFORMATION
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Setting the volume for traffic
Whenever a traffic announcement (TA)
is broadcast, the system switches au- announcements
tomatically from a station that does not
● Press the MENU button 8.
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
● Press the or button 7 re-
peatedly until “TA VOLUME” ap-
pears in the display.
Once the traffic report has been played,
the system will switch back to the pro-
gramme that you were listening to be-
fore.
● Adjust the volume using the
buttons 7.
When you have finished making your
changes,
Switching traffic information
priority on/off
● press the MENU button 8 twice.
● Briefly press the TRAF button :.
Note:
● Using the volume control 3, you
can also adjust the volume during
a traffic announcement for the du-
ration of that announcement.
Traffic announcement priority is active
when a traffic-jam symbol lights up in
the display.
Note:
Note:
You will hear a warning sound:
● You can adjust the sound settings
and volume distribution settings for
traffic announcements. For further
details, refer to the chapter entitled
“Sound”.
● if you leave the reception area of a
traffic information station that you
are currently listening to.
● if, while listening to a CD or CD in
the changer, you leave the recep-
tion area of a traffic information sta-
tion that the system is tuned into,
and the subsequent automatic
search cannot find a new traffic in-
formation station.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
39
CD MODE
CD mode
You can use this device to play stand-
ard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 or 8 cm.
● If a CD is already inserted in the
drive,
● press the SRC ( ) button 6 re-
peatedly until “CD” appears in the
display.
Risk of severe damage to the
CD drive!
Playback begins from the point at which
it was last interrupted.
Contoured CDs (shape CDs) are not
suitable for playback in this unit.
We accept no responsibility for any
damage to the CD drive that may
occur as a result of the use of un-
suitable CDs.
Selecting tracks
● Press one of the arrow buttons 7
to select the next or previous track.
If you press the or button 7 once,
the player will play the current track
again from the beginning.
Switching to CD mode
● If there is no CD inserted in the
Fast track selection
To quickly select tracks backwards or
forwards,
drive,
● press the
button 1.
The flip-release panel opens.
● press and hold down one of the
buttons 7 until fast-reverse /
/
● Gently insert the CD with its printed
side uppermost into the drive until
you feel some resistance.
fast-forward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
The drive draws in the CD automatical-
ly.
● press and hold down one of the
buttons 7 until fast search-
You must not hinder or assist the drive
as it draws in the CD.
ing backwards / forwards begins.
● Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
Random track play (MIX)
● Press the 5 MIX button 9.
The CD starts playing.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Note:
● If the ignition was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 2 in order to
start playing the CD.
Cancelling MIX
● Press the 5 MIX button 9 again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
40
CD MODE
Scanning tracks (SCAN)
Pausing playback (PAUSE)
You can briefly play all the tracks on the
CD.
● Press the 3 button 9.
“PAUSE” appears in the display.
● Press and hold down the MENU
button 8 for longer than two sec-
onds.
Cancelling pause
● Press the 3 button 9 while in
pause mode.
The next track will then be played brief-
ly.
Playback is resumed.
Note:
Configuring the display
You can choose between two display
types for CD mode:
● You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
•
Track number and clock time
(“CLOCK”)
Stopping SCAN and continuing
listening to a track
•
Track number and playing time
(“PLAYTIME”)
● To stop scanning, press the MENU
button 8.
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “CD DISP” appears
in the display.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
● press the 4 RPT button 9.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated continuously until you
deactivate RPT.
● Press the or button 7 to
switch between “PLAYTIME” and
“CLOCK”.
● Press the MENU button 8 twice.
Displaying CD text
Some CDs include CD text. The CD text
might contain the names of the artist,
album and tracks.
Cancelling REPEAT
If you want to deactivate the repeat func-
tion,
You can allow the CD text to be dis-
played as scrolling text every time you
switch to another track. The standard
display will appear again after the whole
CD text has been shown once. For fur-
ther information, read the section enti-
tled “Configuring the display”.
● press the 4 RPT button 9 again.
“RPT OFF” appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
41
CD MODE
Note:
Switching CD text on/off
● If a CD is ejected, the drive will au-
tomatically draw it back in again
after 10 seconds.
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “CD TEXT” appears
in the display.
● You can also eject CDs whilst the
device is switched off or whilst an-
other audio source is activated.
● Switch the CD text function on
(“TEXT ON”) or off (“TEXT OFF”)
using the or button 7.
When you have finished making your
changes,
● press the MENU button 8 twice.
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments in CD mode,
● press the TRAF button :.
Traffic announcement priority is active
when a traffic-jam symbol lights up in
the display. For further details, read the
chapter entitled “Traffic information re-
ception”.
Ejecting a CD
● Press the
button 1.
The flip-release panel opens out to-
wards you.
● Press the eject button ; next to
the CD compartment.
The CD is ejected.
● Remove the CD and close the con-
trol panel.
42
CD-CHANGER MODE
Configuring the display
CD-changer mode
There are five display options available
for CD-changer mode:
Note:
● Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
•
•
•
•
•
Track number and playing time
Track number and clock time
CD number and track number
CD number and playing time
CD number and clock time
Switching to CD-changer mode
● Press the SRC ( ) button 6 re-
peatedly until “CHANGER” ap-
pears in the display.
● Press the MENU button 8.
● Press the or button 7 re-
peatedly until “CDC DISP” appears
in the display.
The device starts playing the first CD
that the CD changer detects.
● Press the or button 7 re-
peatedly until the option that you
want appears in the display.
Selecting CDs
To move up or down to another CD,
● Press the MENU button 8 twice.
● press the or button 7 once
or several times.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
Note:
● The device will ignore empty CD
slots in the changer and slots con-
taining invalid CDs.
● briefly press the 4 RPT button 9.
“RPT TRCK” appears briefly and RPT
lights up in the display.
Selecting tracks
To move up or down to another track
on the current CD,
To repeat the current CD,
● press and hold down the 4 RPT
button 9 for longer than two sec-
onds.
● press the or button 7 once
or several times.
Fast searching (audible)
To fast search backwards or forwards,
“RPT DISC” appears briefly and RPT
lights up in the display.
● press and hold down one of the
buttons 7 until fast search-
ing backwards / forwards begins.
43
CD-CHANGER MODE
Cancelling REPEAT
Stopping SCAN
To stop the current track or current CD To stop scanning,
from being repeated,
● briefly press the MENU button 8.
The currently scanned track will then
continue to be played normally.
● briefly press the 4 RPT button 9.
“RPT OFF” appears and RPT disap-
pears from the display.
Note:
● You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Random track play (MIX)
To play the tracks on the current CD in
random order,
● briefly press the 5 MIX button 9.
“MIX CD” appears briefly and MIX lights
up in the display.
Pausing playback (PAUSE)
● Press the 3 button 9.
“PAUSE” appears in the display.
To play the tracks on all inserted CDs in
random order,
Cancelling pause
● press and hold down the 5 MIX
button 9 for longer than two sec-
onds.
● Press the 3 button 9 while in
pause mode.
Playback is resumed.
“MIX ALL” appears briefly and MIX
lights up in the display.
Cancelling MIX
● Briefly press the 5 MIX button 9.
“MIX OFF” appears and MIX disappears
from the display.
Scanning all tracks on all CDs
(SCAN)
To briefly play all the tracks on all the
inserted CDs in ascending order,
● press and hold down the MENU
button 8 for longer than two sec-
onds.
“TRK SCAN” appears in the display and
the number of the current track flashes.
44
CLOCK - TIME
● Press the or button 7 to
CLOCK - Time
switch between the modes.
Displaying the clock time
To briefly display the clock time,
When you have finished making your
changes,
● Press and hold down the SRC (
button 6 until the clock time ap-
pears in the display.
)
● press the MENU button 8.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is
off and the vehicle ignition is on,
Setting the clock time
To set the clock time,
● press the MENU button 8.
● Press the or button 7 re-
peatedly until “CLOCK SET” ap-
pears in the display.
● press the MENU button 8.
“MENU” appears in the display.
● Press the or button 7 re-
peatedly until “CLOCK OFF” or
“CLOCK ON” appears in the dis-
play.
● Press the button 7.
The time appears in the display. The
hours flash and can be adjusted.
● Adjust the hours using the
buttons 7.
/
● Press the or button 7 to
switch between the ON/OFF set-
tings.
Once the hours are set,
● press the button 7.
The minutes flash.
When you have finished making your
changes,
● press the MENU button 8.
● Adjust the minutes using the
buttons 7.
/
Briefly displaying the time when
the device is switched off
● Press the MENU button 8 twice.
To briefly display the time when the de-
vice is off,
Selecting 12/24-hour clock
mode
● press the SRC ( ) button 6.
The time is displayed for eight seconds.
● Press the MENU button 8.
“MENU” appears in the display.
● Press the or button 7 re-
peatedly until “24 H MODE” or
“12 H MODE” appears in the dis-
play.
45
SOUND
Sound
You can adjust the sound settings (bass
and treble) separately for each audio
source (radio, CD, CD changer, AUX
and traffic announcements). The vol-
ume distribution settings (balance and
fader) apply to all the audio sources.
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribu-
tion (balance),
● press the AUDIO button 5.
“BASS” appears in the display.
● Press the button 7 repeatedly
Note:
until “BAL” appears in the display.
● You can only adjust the sound set-
tings for traffic announcements
whilst a traffic announcement is ac-
tually being played.
● Press the or button 7 to ad-
just the balance (right/left).
When you have finished making your
changes,
Adjusting the bass
● press the AUDIO button 5.
● Press the AUDIO button 5.
“BASS” appears in the display.
Adjusting the front/back volume
distribution (fader)
To adjust the front/back volume distri-
bution (fader),
● Press the or button 7 to ad-
just the bass.
When you have finished making your
changes,
● press the AUDIO button 5.
● press the AUDIO button 5.
“BASS” appears in the display.
● Press the button 7 repeatedly
until “FADER” appears in the dis-
play.
Adjusting the treble
● Press the AUDIO button 5.
“BASS” appears in the display.
● Press the or button 7 to ad-
● Press the button 7 repeatedly
just the fader (front/back).
until “TREB” appears in the display.
When you have finished making your
changes,
● Press the or button 7 to ad-
just the treble.
● press the AUDIO button 5.
When you have finished making your
changes,
● press the AUDIO button 5.
46
SOUND
X-BASS
Equalizer presets
X-BASS
This device is equipped with an equal-
izer that has been preset with settings
for the “ROCK”, “POP” and “CLASSIC”
music styles.
The X-BASS feature can be used to
boost the bass at low volume levels.
Note:
● You can adjust the X-Bass settings
separately for each audio source
(radio, CD, CD changer and AUX).
To select an equalizer preset,
● press the AUDIO button 5.
“BASS” appears in the display.
Adjusting the X-BASS boost
settings
● Press the button 7 repeatedly
until “POP”, “ROCK”, “CLASSIC” or
“OFF” appears in the display.
You can set the X-BASS boost in steps
ranging from 1 to 3.
● Press the or button 7 to se-
lect one of the presets or select
“OFF” to switch off the equalizer. If
you select one of the presets,
“XBASS OFF” means that the X-BASS
feature is switched off.
● Press the AUDIO button 5.
“BASS” appears in the display.
SOUND lights up in the display to-
gether with the selected setting.
● Press the button 7 repeatedly
until “XBASS” appears in the dis-
play together with the current set-
ting.
When you have finished making your
changes,
● press the AUDIO button 5.
● Press the or button 7 re-
peatedly until the setting that you
want appears in the display.
When you have finished making your
changes,
● press the AUDIO button 5.
47
LEVEL DISPLAY
EXTERNAL AUDIO SOURCES
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output.Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
Configuring the level
display
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst you
are adjusting them.
When you are not changing any set-
tings, the level display depicts the sound
system’s output level. You can switch
the level display on/off.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
● Press the MENU button 8.
“MENU” appears in the display.
● Press the or button 7 re-
peatedly until “PEAK LVL” appears
in the display.
Switching the AUX input on/off
● Press the MENU button 8.
“MENU” appears in the display.
● Press the or button 7 to
switch between “PEAK ON” and
“PEAK OFF”.
● Press the or button 7 re-
peatedly until “AUX OFF” or “AUX
ON” appears in the display.
When you have finished making your
changes,
● press the MENU button 8 twice.
● Press the or button 7 to
switch AUX on/off.
When you have finished making your
changes,
● press the MENU button 8.
Note:
● If the AUX input is switched on, you
can select it by pressing the SRC
button 6.
48
SPECIFICATIONS
Specifications
Amplifier
Output power:
4 x 25 watts sine
in accordance
with DIN 45 324 at
14.4 V
4 x 45 watts max.
power
Tuner
Wavebands in Europe:
FM
MW :
LW
:
87.5 - 108 MHz
531 - 1602 kHz
153 - 279 kHz
:
FM frequency response:
35 - 16,000 Hz
CD
Frequency response:
20 - 20,000 Hz
3 V
Pre-amp Out
4 channels:
Input sensitivity
AUX input
: 2 V / 6 kΩ
Subject to changes!
49
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço / Servicenumre
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5444
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 0030-210 94 27 337 0030-210 94 12 711
(IRL) 01-4149400
01-4598830
02-369 62464
40 2085
(I)
02-369 62331
40 4078
Luxembourg (L)
Netherlands (NL) 023-565 6348
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
01-2185 00144
902-120234
08-7501500
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0441
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
01-333 9575
Poland
(PL) 0800-118922
(TR) 0212-3350677
(USA) 800-2662528
Turkey
USA
0212-3460040
708-6817188
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
12/03
CM/PSS 8 622 403 875
|