TABLE OF CONTENTS
Device overview ..................... 14 Removal ................................. 21
5.8" and 6.5" TFT-LCD screen ...... 14
OSD menu ............................. 22
General information ............... 16
Important notes ............................. 16
Safety notices ............................... 16
Operation ...................................... 22
IR remote control ................... 23
Functions ...................................... 23
Accessories............................ 17
Accessories supplied .................... 17
Available accessories .................... 17
Specifications ........................ 24
5.8" screen ................................... 24
6.5" screen ................................... 25
Fitting ..................................... 17
Monitor installation......................... 17
Prepare the working area .............. 17
Mark out the dimensions................ 17
Carefully cut open the headrest
Connection diagram ............ 109
cover............................................. 18
Open the headrest and remove
filling and other items..................... 18
Lay the cable through the headrest . 19
Insert the mounting frame in the
headrest ........................................ 19
Inserting the monitor...................... 19
Check and adjust the monitor then
apply the Velcro strips ................... 20
Example of a direct connection to a
DVD player.................................... 20
Positive connection ....................... 20
Negative (ground) connection ........ 21
15
NOTES
General information
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
To avoid the risk of electrical
shock, the device must be protected
from water and moisture, and must
not be opened. Dangerously high
voltages are generated inside the
device.
Please read these operating instruc-
tions before using the equipment for
the first time.
We wish to point out that the right to
claim against warranty is invalidated by
any changes or modifications to the
device that have not been explicitly ap-
proved by the manufacturer.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the device,
please contact your dealer or the tele-
phone hotline for your country. You will
find the telephone number printed at the
back of this booklet.
Long-term operation or storage outside
the specific temperature range can lead
to a shortening of the useful life of the
LC display.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
antee conditions at www.blaupunkt.de
or ask for them directly at:
Safety notices
Please observe the following safety
notices during installation and whilst
making the connections.
-
Disconnect the negative and positi-
ve terminals of the battery.
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
-
When doing so, please observe the
safety notices provided by the vehicle
manufacturer.
D-31139 Hildesheim
-
Before drilling the holes necessary
for mounting the equipment and for
laying cables, please make sure that
concealed cables, the fuel tank and
fuel lines cannot be damaged in the
process!
Important notes
This device is not intended for fitting in
the forward section of the passenger
compartment where it could also be
seen by the driver. Fitting this device in
any part of the vehicle where it could
interfere with or distract the driver’s at-
tention is dangerous and is not permit-
ted. The manufacturer cannot accept
responsibility for any damage caused
as a result of improper fitting of this de-
vice.
16
ACCESSORIES
Accessories
FITTING
Fitting
Accessories supplied
- Connecting cable
- Extraction tool
- Operating instructions
- Mounting plate
Monitor installation
Note:
It is recommended that the fitting is car-
ried out at a specialist workshop.
Prepare the working area
- Adapter cable for a direct connection
to an AV source
- IR remote control IVRC-06
➮ Remove the headrest, and place it
on a working surface that has been
cleared and cleaned, where the fur-
ther assembly procedures may be
carried out.
Available accessories
- Monitor bracket 7608009300
The installation instructions are included
with the bracket.
Note:
Take appropriate action to ensure that
the headrest is not damaged while fit-
Note regarding VIDEO IN/AUX:
Only use original Blaupunkt accessory ting the monitor.
7 607 001 510.
Or else use a mono plug.
Mark out the dimensions
➮ Feel the covering of the headrest
carefully to ensure that there are no
invisible parts that would prevent the
monitor from being fitted.
Mark out the surface that needs to be
cut out - its size must match that of the
installation frame.
17
FITTING
Open the headrest and remove
filling and other items
➮ Carefully lift the covering material
away from the cut area.
➮ Adjust the cutting depth of the knife
to about 2.5 cm, and cut into the he-
adrest following a line about 0.5 cm
inside the marked edge.
➮ Carefully lift the filling material at one
corner, and cut deeper into the ma-
terial with the knife.
Carefully cut open the headrest
cover
Use a knife with an adjustable cutting
depth to cut out the planned area.
➮ Remove the filling material in small
pieces.
➮ As you do this, lift one piece of the
filling material, and ensure that the
cut is being made to an even depth.
➮ Make the first cut inside the marked
area at a point about 0.5 cm from one
of the corners, then make a diago-
nal cut to a point about 0.5 cm from
the opposite corner.
To remove other pieces, use a Dremel
saw or another suitable tool.
➮ Insert the monitor to check that it will
fit into the cut area, and make ad-
justments if necessary.
➮ Make a similar cut between the oth-
er two diagonally opposed corners.
18
FITTING
Lay the cable through the
headrest
➮ Now pass the supplied cables throu-
gh the opening so that they emerge
from the underneath of the headrest.
➮ If possible, cover the cable with a ca-
ble tunnel.
➮ Now connect the power supply,
ground and video signal cables, to
check that the monitor is working.
Inserting the monitor
➮ Before connecting the monitor, pass
the connecting cables through the
holes provided in the mounting pla-
te, as shown in the illustration.
➮ Insert the monitor into the mounting
plate, and attach it with appropriate
fastenings.
Insert the mounting frame in the
headrest
➮ Before connecting the monitor, pass
the connecting cables through the
holes provided in the mounting pla-
te, as shown in the illustration.
Monitor
Mounting plate
➮ Insert the mounting plate into the
area that has been cut out, and fix it
in place with appropriate fastenings.
19
FITTING
Check and adjust the monitor Example of a direct connection to
then apply the Velcro strips
a DVD player
➮ Connect the monitor, place it tempo-
rarily in the cut-out, and place the
headrest into position.
Adapter cable for a
direct connection to an
AV source
➮ Check the various monitor settings
such as brightness, headphone func-
tion, volume control and so on.
DVD - Player (IVDP-01)
➮ Then attach the Velcro strips to the
rear of the monitor, and push the fra-
me onto the headrest.
Digital AV
out
in
Take care not to press the screen its-
elf, and apply pressure only in the
region of the frame.
Masse/GND
+12V
IVMS 5802/6502
Positive connection
Connect the fuse holder to protect the
positive cable (+12 V). The fuse holder
should be connected to the positive ter-
minal at a distance of max. 30 cm from
the vehicle battery (if necessary, drill a
hole in the bulkhead and use the ap-
propriate cable grommets).
20
FITTING
REMOVAL
Negative (ground) connection
Removal
Attach the negative cable (earth/GND)
directly to the vehicle body using a
screw. Scratch the surface down to the
bare metal at the point at which the
ground is made.
➮ To remove the screen, insert the ex-
traction tool between the screen and
the mounting plate.
➮ Insert the extraction tool at the place
where a slot has been provided be-
tween the screen and the mounting
plate.
•
If the installation requires holes to be
drilled or any other changes to be
made to the vehicle, please contact
a specialist workshop in your area.
Extraction tool
21
OSD MENU
OSD menu
Operation
➮ Press the “MENU” button on the dis-
play or on the remote control to open
the OSD menu.
➮
➮
TINT:
To adjust the picture shade (only
for NTSC)
REVOLVE:
To revolve the screen display
- LEFT - RIGHT
Horizontally mirrored
➮
Use the arrow buttons
/
to sel-
ect the options and after you press
the MENU button you can use the
- UP - DOWN
Vertically mirrored
arrow buttons
settings.
/
to change the
➮
➮
RESET PICTURE:
To reset the configured parameters
to the factory default settings.
➮ Press the “EXIT” option to close the
OSD menu again.
EXIT:
To close the OSD menu
ZOOM
BRIGHTNESS
CONTRAST
COLOR
TINT
REVOLVE LEFT-RIGHT
UP-DOWN
RESET PICTURE
EXIT
➮
ZOOM (picture size):
Change the picture height/width
- FULL
- NORMAL
- WIDE
➮
BRIGHTNESS
To adjust the brightness
➮
CONTRAST:
To adjust the contrast
➮
COLOR:
To adjust the colour
22
IR REMOTE CONTROL
IR remote control
Functions
The supplied remote control is suitable
for operating the following monitors:
IVMS-5802 and IVMS-6502.
1
2
3
1 POWER
POWER TV/VIDEO
MUTE
On/off button for the monitor.
4
5
2 TV/VIDEO
No function.
3 VOL • arrow button
Increase the volume for the sel-
ected monitor.
VOL
CH
VOL • arrow button
Decrease the volume for the sel-
ected monitor.
6
4 MUTE
MENÜ
Mute the volume of the loudspea-
kers inside the monitor.
5 CH • arrow button
/
Channel selection if the monitor is
connected to a signal controller
IVSC-3302 or IVSC-5502.
IVRC-06
Caution:
The way the CH
/
buttons
function depends on the monitor
selection (which is made using
the signal controller’s remote con-
trol).
6 Menu
See OSD menu, operation (page
22).
23
SPECIFICATIONS
Specifications
5.8" screen
System:
NTSC/PAL auto switch
Power supply / consumption:
12 V direct current, ± 10%,
<900 mA
Standby:
< 1 mA
Video input level:
Audio input level:
Operating temperature:
Storage temperature:
Screen size (diagonal):
Contrast ratio:
1 Vpp, 75 ohms
0 - 0.3 Vrms, 20 Hz - 20 kHz
-20° C to +60° C
-30° C to +80° C
5.8" (14.7 cm)
60
Power consumption:
Brightness:
< 11 W
300 cd/m2
Display technology:
Resolution (pixels):
Visible screen area:
Viewing angle:
TFT active matrix system
1200 (H) x 234 (W) = 280,800 pixels
127.20 (W) x 71.84 (H) mm
From the left and right: 60°,
From above: 60°,
From below: 30°
Total monitor dimensions:
Monitor weight:
165 (W) x 122 (H) x 26.7 (D) mm
< 400 g
24
SPECIFICATIONS
6.5" screen
System:
NTSC/PAL auto switch
Power supply / consumption:
12 V direct current, ± 10%,
<900 mA
Standby:
< 1 mA
Video input level:
Audio input level:
Operating temperature:
Storage temperature:
Screen size (diagonal):
Contrast ratio:
1 Vpp, 75 ohms
0 - 0.3 Vrms, 20 Hz - 20 kHz
-20° C to +60° C
-30° C to +80° C
6.5" (16.5 cm)
60
Power consumption:
Brightness:
< 10 W
280 cd/m2
Display technology:
Resolution (pixels):
Visible screen area:
Viewing angle:
TFT active matrix system
1200 (H) x 234 (W) = 280,800 pixels
142.80 (W) x 87.70 (H) mm
From the left and right: 60°,
From above: 60°,
From below: 30°
Total monitor dimensions:
Monitor weight:
176.0 (W) x 122 (H) x 26.7 (D) mm
< 400 g
Subject to changes!
25
Anschlussbild • Connection diagram • Schéma de connexion
• Schema di allacciamento • Bedradingsschema •
Anslutningsschema • Cuadro de conexiones • Esquema de
ligação • Tilslutningsbillede
I V M S 5 8 0 2
V i d e o o u t
u d A i o R o u t
u d A i o L o u t
o l l e r I V S C - 3 S 3 i 0 g 2 n a l C o n t r
109
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço / Servicenumre
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 57 69 473
01-4598830
02-369 6464
40 2085
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
Luxembourg (L)
Netherlands (NL)
Norway
Portugal
Spain
(GR) 210 57 85 350
(IRL) 01-4149400
(I)
02-369 6331
40 4078
023-565 6348
66-817 000
01-2185 00144
902-120234
08-7501500
(N)
(P)
(E)
(S)
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ)
02-6130 0441
01-333 9575
0800-118922
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
Poland
(PL)
Turkey
USA
(TR)
0212-3350677
0212-3460040
708-6817188
(USA) 800-2662528
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
07/03
CM/PSS2 - 8 622 403 803
|