Camera Menus
DINION 4000 AN
en Quick Operation Guide
Analog Camera Menus
Setup menu | en
3
1
Setup menu
Press the center button of the control pad to access the SETUP
menu.
Set
Menu
–
Press the up or down buttons to move the cursor through
the menus.
–
–
Press the right or left buttons to change values.
When the symbol
is shown, press the center button to
select an item or open a submenu.
Navigation items at the bottom of the screen
–
–
–
–
To move to the continuation of a menu, select NEXT.
To return to the previous menu, select BACK or RETURN.
To save changes, select SAVE ALL.
To close the SETUP menu, select EXIT.
Bosch Security Systems
Quick Operation Manual
AM18-Q0636 | v1.0 | 2013.01
4
en | Setup menu
Analog Camera Menus
1.1
Main menu
LENS
Iris setting
SHUTTER/AGC
WHITE BAL
BACKLIGHT
PICT ADJUST
DYN
Auto and manual exposure control
White balance setting
Backlight compensation setting
Image adjustment setting
Dynamic range setting
MOTION DET
PRIVACY
Video motion detection setting
Privacy masking setting
Day/Night setting
DAY/NIGHT
DNR
Digital noise reduction
CAMERA ID
SYNC
Camera identification
Synchronization mode setting
Language setting
LANGUAGE
CAMERA RESET
SAVE ALL
Restores all factory default values
Saves all settings
1.1.1
Lens menu
LENS
MANUAL
AUTO
TYPE
DC
MODE
SPEED
RETURN
OPEN, CLOSE, AUTO
0 - 255
AM18-Q0636 | v1.0 | 2013.01
Quick Operation Manual
Bosch Security Systems
Analog Camera Menus
Setup menu | en
5
1.1.2
Shutter/AGC (Automatic Gain Control) menu
SHUTTER/AGC AUTO
HIGH LUMINANCE
MODE
SHUT+AUTO IRIS, AUTO
IRIS
BRIGHTNESS
RETURN
0 - 255
LOW LUMINANCE
MODE
AGC, OFF
BRIGHTNESS
RETURN
x0.25, x0.5, x0.75, x1.0
MANUAL MODE
SHUT+AGC
SHUTTER
1/60, 1/120, 1/250, 1/500,
1/1000, /2000, 1/4000,
1/10000 (NTSC)
1/50, 1/100, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/10000 (PAL)
AGC
6, 12, 18, 24, 30, 36, 42,
44.8
RETURN
Bosch Security Systems
Quick Operation Manual
AM18-Q0636 | v1.0 | 2013.01
6
en | Setup menu
Analog Camera Menus
1.1.3
White balance menu
WHITE BAL
ATW
SPEED
0 - 255
0 - 255
DELAY CNT
ATW FRAME
ENVIRONMENT
RETURN
x0.5, x1.0, x1.5, x2.0
INDOOR, OUTDOOR
PUSH
USER1
B-GAIN
R-GAIN
RETURN
0 - 255
0 - 255
USER2
B-GAIN
R-GAIN
RETURN
0 - 255
0 - 255
ANTI CR
MANUAL LEVEL
RETURN
0 - 255
PUSH
LOCK
–
–
–
ATW (Auto Tracking White balance) and PUSH (Full pull-in:
1,800 K to 10,500 K) continuously analyze color
temperature.
Use ANTI CR (Anti Color Rolling) when certain types of
fluorescent light cause the picture to periodically change
color.
Use PUSH LOCK with a reference white object filling the
screen.
AM18-Q0636 | v1.0 | 2013.01
Quick Operation Manual
Bosch Security Systems
Analog Camera Menus
Setup menu | en
7
1.1.4
Backlight menu
BACKLIGHT
OFF
BLC
HLC
–
–
Use BLC (Back Light Compensation) to see a dark object in
front of a bright background.
Use HLC (High Light Compensation) to darken highlights
and avoid image wash-out (for example, car headlights).
1.1.5
Picture adjust menu
PICT ADJUST
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
ON, OFF
0 - 255
0 - 255
0 - 255
0 - 255
0- 255
GAIN
RETURN
1.1.6
Dynamic range setting menu
DYN
OFF
ON
LUMINANCE
CONTRAST
LOW, MID, HIGH
LOW, MIDLOW, MID,
MIDHIGH, HIGH
RETURN
–
Use DYN (Dynamic range setting) to improve dynamic
range by highlight compression and contrast
enhancement.
Bosch Security Systems
Quick Operation Manual
AM18-Q0636 | v1.0 | 2013.01
8
en | Setup menu
Analog Camera Menus
1.1.7
Motion detection menu
MOTION DET
OFF
ON
DETECT SENSE
BLOCK DISP
MONITOR AREA
AREA SEL
TOP
0 - 127
OFF, ON, ENABLE
OFF, ON
1 - 4
0 - 244 (NTSC), 288 (PAL)
0 - 244 (NTSC), 288 (PAL)
0 - 474 (NTSC), 468 (PAL)
0 - 474 (NTSC), 468 (PAL)
BOTTOM
LEFT
RIGHT
RETURN
–
–
The ENABLE function sets the regions/blocks where
motion detection does not work.
To exit the BLOCK DISP ENABLE function, press straight
down on the set button for a longer time.
1.1.8
Privacy masking menu
PRIVACY
OFF
ON
AREA SEL
TOP
1 - 8
0 - 244 (NTSC), 288 (PAL)
0 - 244 (NTSC), 288 (PAL)
0 - 474 (NTSC), 468 (PAL)
0 - 474 (NTSC), 468 (PAL)
1 - 8
BOTTOM
LEFT
RIGHT
COLOR
TRANSP
MOSAIC
RETURN
0.00, 0.50, 0.75, 1.00
OFF, ON
–
Only 4 areas are available if MONITOR AREA of motion
detection is on.
AM18-Q0636 | v1.0 | 2013.01
Quick Operation Manual
Bosch Security Systems
Analog Camera Menus
Setup menu | en
9
Area selection for motion or privacy masks
Select area 1, 2, 3 or 4 (8).
–
–
Top: extend or reduce upper limit of the detection area.
Bottom: extend or reduce bottom limit of the detection
area.
–
–
Left: extend or reduce left limit of the detection area.
Right: extend or reduce right limit of the detection area.
TOP
reduce RIGHT
extend
LEFT
RIGHT
1
1
BOTTOM
1.1.9
Day/night menu
DAY/NIGHT
AUTO
BURST
OFF, ON
DELAY CNT
DAY->NIGHT
NIGHT->DAY
RETURN
0 - 255
0 - 255
0 - 255
COLOR
B/W
BURST
OFF, ON
EXT
OFF, EXT1, EXT2
RETURN
–
–
When EXT is on the IR cut-off filter is switched by an
external input.
With EXT1 the camera switches to night mode when alarm-
in is high; with EXT2 the camera switches to night mode
when alarm-in is low.
–
The output relay closes when the camera switches to
NIGHT mode.
Bosch Security Systems
Quick Operation Manual
AM18-Q0636 | v1.0 | 2013.01
10 en | Setup menu
Analog Camera Menus
1.1.10
Digital noise reduction menu
DNR
DNR MODE
Y LEVEL
OFF, Y, C, Y/C
0 - 15
0 - 15
C LEVEL
RETURN
1.1.11
Camera identification menu
CAMERA ID
OFF
ON
RETURN
When ON is selected, a virtual keyboard appears on the screen.
Use the control pad to move to the character you want and
select it. Repeat this to enter the camera ID you desire. You can
enter up to 52 characters.
1.1.12
Synchronization menu
SYNC.
INT
LL
PHASE
0 - 524 (624)
RETURN
Line-Lock (LL) is only available for cameras with a VAC power
supply.
1.1.13
Language menu
LANGUAGE
ENGLISH, JAPANESE, GERMAN, FRENCH, RUSSIAN,
PORTUGUESE, SPANISH, SIMPLIFIED CHINESE
AM18-Q0636 | v1.0 | 2013.01
Quick Operation Manual
Bosch Security Systems
|