Fire Alarm Systems | FMM‑100 Series Die‑cast Metal Fire Alarm Manual Stations
FMM‑100 Series Die‑cast Metal Fire Alarm
Manual Stations
Single or dual action
▶
▶
▶
▶
Terminal connections
Gold‑plated alarm contacts for corrosion resistance
Surface or weatherproof back boxes
The FMM‑100 Series is a family of versatile, high‑quality,
metal fire alarm manual stations. Single‑action or
Certifications and Approvals
dual‑action models are available. All models come with a key
lock and contain gold‑plated contacts to resist corrosion.
Region
Certification
USA
UL
UNIU: Boxes, Non-Coded (UL38), UNIU7:
Boxes, Non-Coded Certified for Canada
(cULus)
Functions
CSFM
7150-1615: 224
Operation
NYC-MEA 382-94-E or 382-94-E, Vol. 3
Single-action
When the bar on the front of the manual station is pulled, it
latches open and is easily visible from 50 ft (15 m). Reset
the activation bar by opening the manual station with the
key and placing the activation bar in its normal upright
position. An optional scored acrylic break rod is available.
Installation/Configuration Notes
Compatibility Information
Compatible with all Bosch Security Systems, Inc. Fire Alarm
Control Panels.
Dual-action
Mounting Considerations
With the dual‑action configuration the upper bar on the
front of the manual station rotates inward allowing the
activation bar to be grasped and operated by a single hand.
The FMM Series manual stations can be surface mounted
on either the FMM‑100BB‑R Surface‑mount Back Box or the
FMM‑100WPBB‑R Weatherproof Back Box. They can also be
flush mounted on a standard single‑gang back box.
Note
When properly mounted on the
FMM‑100WPBB‑R Weatherproof Back Box,
these manual stations meet UL requirements
for outdoor use.
|