OWNER’S MANUAL
Model FP200
120V~, 60Hz., 350 Watts
DO IT ALL 3
STICK BLENDER/CHOPPER
EURO-PRO Operating LLC
Boston, MA, 02465
1 (800) 798-7398
COPYRIGHT© EURO-PRO OPERATING LLC 2008
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS cont.
4. Place the metal stick blender first into the
The Bravetti Platinum Pro DO IT ALL 3 STICK BLENDER/CHOPPER is an
indispensable kitchen tool for blending, chopping, mixing or pureeing when preparing
your favorite recipes. The interchangeable accessories and attachments that come with
your unit are powered by a high efficiency 350 watt power pack. For best results, be
sure to carefully read all the instructions contained in this book before using this
appliance.
Variable Speed Control:
food to be chopped or pureed before
pressing the On/Off Switch to avoid
spattering.
Your Bravetti Platinum Pro Do It All 3 Stick
Blender/ Chopper has been designed with a
variable speed control to provide more
versatility in preparing delicate sauces or for
chopping ice. To adjust speed, turn knob on
top of Power Pack clockwise from low setting to
increase speed and counterclockwise from
high setting to decrease speed.
5. Use the variable speed control knob to
select the desired speed.
6. Always release the On/Off switch before
removing the stick blender from the food
especially when using the stick blender in
hot liquids. Always hold the unit with your
hand while processing. Never leave the
unit unattended or hook it on the wall
bracket when it is plugged in.
7. To remove the stick blender attachment
from the power pack, first unplug the unit
from the power source and turn only the
stick blender attachment 90°
350 Watt Power Pack
Food Chopper Attachment
Caution - Blades are sharp. Use
extreme caution when handling the
blade, always hold it by the plastic
hub. Do not immerse the cover and gear
box in water.
To store the unit, do not wrap cord
around the power pack. Coil cord loosely
and use a twist tie to secure it in large
loops.
The 350 Watt Power Pack operates on
120V~, 60Hz. electrical power. Never
allow the power pack to become wet
when plugged into an electrical outlet.
Assembling the Stick Blender:
Make sure that the unit is unplugged from
power source before attaching or removing
any of the Stick Blender attachments.
1. Line up arrow of Stick Blender attachment
with arrow on power pack. Once fully
inserted, rotate stick blender attachment
clockwise 90º until arrow on power pack
aligns with square on Stick Blender.
Warning: The power pack should
never be immersed in water.
Caution: Make sure that the power
pack is unplugged from power source
before attaching or removing any
accessory.
counterclockwise and pull it off.
To clean the power pack, processor
cover/gear box, wipe off with a clean,
damp kitchen cloth. Towel dry.
Using the Stick Blender
Warning: This appliance is designed for
intermittent use. Maximum running time
with the Stick Blender is 1 minute. After
this time, allow the unit to cool.
Pureeing soups, sauces, fruits and
vegetables:
* Fruits and vegetables should be peeled,
cored and seeded.
* Meats, poultry, and fish should have skin
and bones removed.
* Food should be cut up into pieces no larger
than 3/4-inch.
* Cook the food in liquid until very soft and
tender.
* Puree cooked food ONLY after allowing to
cool down.
* Food can also be pureed directly in the
pot after being allowed to cool.
* Place the Stick Blender in the center of
the food in an upright position with the
processor end resting directly on the bottom
of the bowl or pot.
* The processor end must always be
immersed in the food. DO NOT lift up and
out of food while operating since the hot
food will splatter and could cause burns.
* While holding the power pack and the
Stick Blender in your hand, press and hold
down on the switch with your index finger.
* Release once the food has reached the
desired consistency.
* Do not operate continuously for more than
1 minute.
* If pieces of unprocessed food remain, or if
there are any lumps, continue pureeing the
food, however, mash the food pieces or
lumps by slightly raising and then lowering
the Stick Blender over those pieces.
To use the power pack with any of the
Bravetti Platinum Pro Do It All Stick
Blender/Chopper accessories, place it
on the attachment shaft aligning the
arrows on the power pack and
accessories to be used and turn it
counterclockwise 90º until the arrow on
the power pack aligns with the square.
To remove the power pack, turn it
clockwise.
Wall Bracket
2. Plug the cord into an electrical outlet.
A wall bracket is provided with your
Bravetti Platinum Pro Do It All 3 Stick
Blender/ Chopper. Install the wall
bracket in any convenient location using
the wall anchors and screws (included).
The Power Pack with or without the Stick
Blender attachment may then be
conveniently stored out of the way. (See
illustration below.)
Caution: To avoid splattering, place the
Stick Blender first in the food to be
beaten or chopped, then press the
button. Always release the button before
removing the Stick Blender from the
food, especially when using the Stick
Blender in hot liquids. Always hold the
Stick Blender with your hand while
processing. Never leave unit
To operate the Power Pack, press on the
switch button located on the top of the
unit. The Power Pack will stop operating
when you remove your finger from the
switch button.
unattended.
Important: Install wall mount bracket
high enough above countertop to
allow for clearance of power pack with
stick blender attached.
Caution: Do not use the Stick Blender on
the stove. If you want to use it in a
saucepan while cooking, you must first
remove saucepan from the stove.
Variable Speed Control
3. Use the glass beaker with the Stick Blender
or you can use another container. The
glass beaker is intended only for
processing small quantities of food with the
Stick Blender.
There is a variable speed control located
at the top of the power pack. To vary the
speed of your Do It All Stick
Blender/Chopper rotate the round knob
at the top of the power pack. From the
low setting turn the variable speed
control clockwise to increase speed and
counterclockwise to reduce speed.
Stick Blender Attachment
Caution - Blade is sharp. Detach Stick
Blender from power pack and wash with
warm soapy water. Do not use any sharp
pointed objects to clean residues from
under the blade.
Care and Cleanup
Always disconnect unit from power
source before cleaning or changing
accessories.
Caution: Never immerse the power
pack, cord, or plug in water.
3
4
OPERATING INSTRUCTIONS cont.
OPERATING INSTRUCTIONS cont.
Press on the switch for 2 to 3 seconds
Food Chopper Assembly
Using the Food Chopper
and then let go. Repeat this
procedure until the food has reached
the desired consistency.
Caution - Blades are sharp. Use
extreme caution when handling the
blade, always hold it by the plastic
hub. Do not immerse the gear box in
water.
*
*
*
Only process very soft, tender pieces
of food.
Food pieces should not be larger than
¾-inch cubes.
Do not fill the processor bowls more
than half way with very soft, tender
foods like cooked apples or tomatoes.
When pureeing foods like cooked
vegetables, soft cheese, or cooked
poultry, only add a few pieces at a
time so that the unit does not jam. It
is best to batch feed when using this
appliance.
3. Disconnect the unit from the power
source. After the blade has fully
stopped, remove the chopper gear
box and the chopper gear box
adapter. Using a rubber spatula,
remove the chopped or minced food
from the glass beaker.
Power Pack
1. Place blade support in the groove
inside the glass beaker.
2. Insert the chopper blade onto the
blade support.
3. Place the food to be chopped into the
glass beaker.
4. Cover the glass beaker with the
chopper gear box adapter.
5. Place the chopper gear box on top of
the glass beaker.
Caution: Never put your fingers or
any utensils in the Stick
Chopper Gear
Box
Blender/Chopper during operation.
*
*
Avoid pureeing foods like citrus fruits
or other foods that have a lot of fiber
or hard, tough skin which can jam the
appliance.
Should the unit jam during use and
the blade stops turning, cease
operation and unplug the unit from
the power source. Disassemble the
unit to remove any food that is
jammed.
Crushing Ice
6. Attach the power pack to the chopper
gear box by rotating 90°
Caution - Blades are sharp. Use
extreme caution when handling the
blade, always hold it by the plastic
hub. Do NOT immerse Power Pack in
water or any other liquid.
Chopper Gear
Box Adapter
counterclockwise and lining up the
arrows.
Ensure that the chopper gear box,
chopper gear box adapter and blade
assembly is well seated before turning
the unit on to chop ice. Hold appliance
with BOTH hands when chopping ice.
Frothier
(not for chopping)
Caution: Never put your fingers or
any utensils in the Stick
Blender/Chopper during operation.
1. Assemble the chopper as you would
for chopping (see page 5 for
assembly instructions).
2. Place ice cubes to be crushed into
bowl.
Warning: This appliance is designed
for intermittent use. Maximum
running time with the Chopper is
15 seconds. Allow unit to cool
before resuming use. Best
Chopper Blade
Blade Support
3. Hold the power pack firmly with one
hand and pulse the On/Off switch with
your index finger as you hold the
glass beaker firmly with the other
when you are crushing ice cubes.
Note: Recommended size of ice cubes is
1 1/4” x 1” x 3/4”. Do not crush more
than 6 oz. of ice cubes at a time.
Warning:This appliance is intended for
intermittent use. When crushing
ice, use only bursts of 4 seconds
each. Run time not to exceed 15
seconds before allowing unit to cool
down.
chopping results are achieved by
using 2-3 second pulses.
Important: To mince meat, cut the
meat into 1/2” cubes and do not
mince more than 6 oz. at one time.
Make sure that the meat, fish or
poultry is fully defrosted and that
all bones and gristle have been
removed. Allow cooked food to
cool before placing in the chopping
bowl.
1. After assembling the unit, hold the
power pack with your hand, press and
hold down on the On/Off switch with
your index finger.
7. If you wish to use the Frothier
attachment to whip cream or milk,
insert onto chopper blade as shown in
illustration at right. The frothier
attachment is NOT to be used for
chopping.
Caution: Hold both the bowl/gear box
and power pack when chopping ice.
Don’t hold appliance by the power
pack only.
Glass Beaker
2. To avoid the food from being over
processed, use the pulse method of
chopping and mincing.
5
6
OPERATING INSTRUCTIONS cont.
OPERATING INSTRUCTIONS cont.
Multi-Mixer Assembly
Care & Maintenance
Storing Your Unit
Caution: Ensure that the appliance is
unplugged from the electrical
power source before changing
attachments. Do not immerse the
mixer gear box in water.
Caution: Ensure that the appliance is
unplugged from the electrical
You may store your unit in the wall
bracket provided. Do NOT wrap power
cord around unit. Coil the cord in
loose loops and tie with a tye wrap or
twist tie.
It is recommended that the chopping
blade be stored inside the glass
beaker as blade is very sharp.
power source before changing or
cleaning attachments. Do not
immerse the mixer gear box in water.
1. To attach the mixer gear box to the
Power Pack, line up arrow on the
Power Pack and Mixer Gear Box.
2. Push Power Pack onto Mixer Gear
Box until seated.
3. While grasping Mixer Gear Box rotate
it 90º clockwise until the arrow on
the Power Pack aligns with the
“Square” on the Mixer Gear Box.
4. To disassemble Mixer Gear Box and
Power Pack rotate Mixer Gear Box
90º counterclockwise.
1. The unit and the various attachments
should be cleaned after each use.
2. All accessories and glass beaker can
be cleaned with warm soapy water.
3. Use a damp cloth or sponge to clean
the housing of the power pack. Do NOT
immerse in water or any other liquid.
Caution: Use extreme caution when
cleaning the chopper blade or
metal stick blender because blades
are SHARP.
Attaching the Attachments to the
Mixer Gear Box
C) Wire Whisk
This attachment is used for beating
air into mixtures such as egg whites,
yolks or creams..
• To install, place stem of Wire Whisk
into either of the openings in the
Mixer Gear Box.
Caution: Ensure that the appliance is
unplugged from the electrical
power source before changing
attachments. Do not immerse the
mixer gear box in water.
Select the desired attachment, either the
Dough Hooks, Wire Beaters or Whisk
and assemble to Mixer Gear Box as
noted below:
• Rotate Wire Whisk while pushing
gently until Wire Whisk “Clicks” into
place.
• Ensure that Wire Whisk is well
seated in Mixer Gear Box.
A) Dough Hooks (2)
For use with light dough ONLY.
• Insert stem end of dough hooks
(one at a time) into opening in base
of Mixer Gear Box.
• Rotate slightly while pressing gently
until dough hook “Clicks” into place.
• Repeat for second dough hook.
• Ensure that dough hooks are well
seated in Mixer Gear Box.
1. After attaching the desired accessory
into the mixer gear box, plug the
mixer into power source.
2. Hold the power pack with one hand
and press and hold the On/Off switch
with your index finger.
3. Ensure that there are no obstructions
and that the accessories are moving
freely in the mixing container.
4. When finished using the unit, unplug
the unit before removing the
B) Wire Beaters (2)
Follow same installation procedure as
above.
accessories.
7
8
Model FP200
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in m aterial and
workm anship for a period of one (1) year from the date of purchase when utilized for normal
household use.
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, return the com plete appliance and accessories, freight prepaid.
If the appliance is found by EURO-PRO Operating LLC to be defective in m aterial or
workm anship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of
purchase date and $9.95 to cover the cost of return shipping and handling m ust be included.*
The liability of EURO-PRO Operating LLC is lim ited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover norm al wear of parts and
does not apply to any unit that has been tampered with or used for comm ercial purposes.
This lim ited warranty does not cover damage caused by m isuse, abuse, negligent handling
or dam age due to faulty packaging or m ishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal
and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is
limited to the specific obligations expressly assumed by it under the term s of the lim ited
warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential
damages of any nature whatsoever. Some states do not perm it the exclusion or lim itation of
incidental or consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you m ay also have other rights which vary
from state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof
of purchase date and to attach tag to item before packing with your name, com plete
address and phone num ber with a note giving purchase information, m odel num ber
and what you believe is the problem with item . W e recom mend you insure the package
(as damage in shipping is not covered by your warranty). M ark the outside of your
package “ATTENTION CUSTOM ER SERVICE”.
----------------------------------------------------------------------------------------------------------------
OW NERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and m ail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification.
By returning this card you acknowledge to have read and understood the instructions for use,
and warnings set forth in the accom panying instructions.
RETURN TO EURO-PRO Operating LLC, 4400 Bois Franc, St-Laurent, QC, H4S 1A7
Model FP200
________________________________________________________________
Appliance m odel
________________________________________________________________
Date purchased
Nam e of store
________________________________________________________________
Owner’s name
________________________________________________________________
Address
City
Prov
Postal Code
Printed in China
|