GLASS BOWL FOOD
PROCESSOR
OWNER’S MANUAL
Model EP108H
120V., 60Hz., 270 Watts
EURO-PRO Operating LLC
Boston, MA, 02465
1 (800) 798-7398
COPYRIGHT © 2008 EURO-PRO OPERATING LLC
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The Bravetti Glass Food Processor is an indispensable kitchen tool for blending,
chopping, mixing or pureeing when preparing your favorite recipes. For best results, be
sure to carefully read all the instructions contained in this book before using this
Operating:
1. Plug power cord into an electrical
outlet.
2. To turn the unit on, turn the speed
control more to the left until you get
the speed that you desire. The
speed can be adjusted while the unit
is in use.
3. Now you are ready to use the food
processor.
Note: Please note that the maximum
amount of liquid to be processed at
one time is 1 cup. Exceeding this
quantity of liquid will cause overflow.
Attention: Do NOT operate this unit
continuously for more than 10-15
seconds.
4. When you are finished using the
food processor, turn the unit “Off”.
5. Unlock the power unit and remove
from the food processor.
Slicing & Shredding Blades
CAUTION: Make sure that the unit
is unplugged from the power
source before inserting or removing
attachments.
1. Select the blade that you wish to
use. (Fig. 6)
2. To insert the blade of your choice
into the blade holder, place the
longer tab of the blade into the blade
holder first. (Fig. 7)
3. Press the other end of the blade until
it clicks into place. (Fig. 8)
4. Fit the processor bowl and spindle
as detailed on the page 3. (Fig. 9)
5. Using the finger holes in the blade
holder, fit it over the spindle and
place spindle in processor bowl.
(Fig. 10)
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
6. Place the processor inner lid onto
the bowl making sure that it is
placed correctly onto the bowl.
(Fig. 11)
appliance.
Using the Chopping Blade:
1. Place the food processor bowl onto
the slip guard pad.
Power Unit
The Power Unit operates on 120V.,
60Hz. electrical power. Never allow the
power unit to become wet when plugged
into an electrical outlet.
2. Holding the chopping blade by
plastic hub, remove the protective
blade cover and insert it onto the
spindle. (Fig. 1)
3. Place the spindle with the blade
onto the locating pin in the food
processor bowl. (Fig. 2)
4. Add ingredients that you wish to
process into the bowl.
5. Place the processor inner lid onto
the bowl making sure that it is
placed correctly onto the bowl.
(Fig. 3)
6. Place the power unit onto the bowl.
Turn the locking/unlocking button to
the left to lock the power unit in
place on the bowl. (Fig. 4)
Warning: The power unit should
never be immersed in water.
Caution: Make sure that the
power unit is unplugged from
power source before attaching
or removing any accessory.
Speed Control & Locking/
Unlocking Button
The speed control & locking/unlocking
button that is on the power unit will
automatically lock the power unit onto the
processor bowl when you turn it on.
6. Remove the processor inner lid. Be
sure that all chopping blade has
stopped rotating before you remove
the processor inner lid.
The food processor has a variable speed
control dial and “Pulse”.
Warning: Do NOT operate this
appliance when empty.
7. Place the power unit onto the bowl.
Turn the locking/unlocking button to
the left to lock the power unit in
place on the bowl. (Fig. 12)
+ =
The speed can be adjusted while the
food processor is in use.
Using the Whipper:
1. Place the food processor bowl onto
the slip guard pad.
2. Insert the whipper onto the spindle.
(Fig. 5)
3. Place the spindle with the whipper
onto the locating pin in the food
processor bowl.
Fig. 1
Use of the “Pulse” button allows greater
control over the texture of the food being
processed. You can also use "Pulse"
when the unit is in the "Off" position.
Please note that the "Pulse" is only
intended to be used for short "bursts" of
processing.
Fig. 6
4. Add ingredients that you wish to
process into the bowl.
Fig. 2
Operating the Food Processor
5. Place the processor inner lid onto
the bowl making sure that it is
placed correctly onto the bowl.
6. Place the power unit onto the bowl.
Turn the locking/unlocking button to
the left to lock the power unit in
place on the bowl.
CAUTION - Blades are sharp. Use
extreme caution when handling
the blade, always hold it by the
plastic hub. Do not immerse the
power unit in water.
Fig. 7
Fig. 8
Fig. 9
CAUTION: Make sure that the unit
is unplugged from the power
source.
Fig. 3
CAUTION: Never place food
processor bowls (glass or plastic)
in microwave or over direct heat.
Fig. 10
Fig. 11
+
=
Fig. 5
IMPORTANT: Remove protective
chopping blade cover(s) before
use. Protective blade covers to be
used only for storage.
Fig. 4
Fig. 12
3
4
CLEANING & TROUBLESHOOTING
OPERATING INSTRUCTIONS
Slicing & Shredding Blades (cont.)
Cleaning
Trouble Shooting (cont.)
Food is unevenly chopped:
• Either you are chopping too much food
at one time, or the pieces are not small
enough. Try cutting the food into
smaller pieces of even size and
8. Plug in the processor.
• Do NOT immerse the power unit into
water or any other liquid. Clean with a
damp sponge or cloth and wipe dry.
• The glass processor bowl and the
chopping blade may be cleaned in the
upper basket of the dishwasher.
• Use extreme caution when cleaning
the chopping blade as the blades are
very sharp.
• The processor inner lid, plastic bowl,
bowl lid, whipper and the slip guard
pad may be washed in lukewarm water
and a mild dishwashing liquid. Do NOT
place these in the dishwasher.
WARNING: ALWAYS USE THE FOOD PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH THE FEEDER TUBE.
Do not overload the food processor bowl. In one operation, you can process a
maximum of 6 cups (1500 ml) of food.
processing smaller amounts per batch.
PROCESSING EXAMPLES
Food is chopped too fine or is too
watery:
• The food has been over processed.
Use brief pulses or process for shorter
time. Let blade stop completely
between pulses.
PROCESSING EXAMPLES USING THE CHOPPING BLADE & WHIPPER
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
RECOMMENDED
PRODUCT
QUANTITY
ACCESSORY USED
Food collects on processor inner lid
or on the sides of the glass bowl:
• You may be processing too much food.
Turn the machine off. When the blade
stops rotating, remove the power unit
and the processor inner lid.
Remove some of the food being
processed. Maximum capacity for
processing is 6 cups (1500 ml).
SPEED
Trouble Shooting
Motor doesn't start or blade doesn't
rotate:
• Check that the plug is securely
inserted into the electrical outlet.
• Check that the processor inner lid and
power unit are securely in place.
Onions / Garlic
Parsley
2 cups
1 cup
Max / Pulse
Max / Pulse
Max / Pulse
Max / Pulse
Max / Pulse
Chopping blade
Chopping blade
Chopping blade
Chopping blade
Chopping blade
Raw Meat
Meat (cooked)
Nuts
2 cups
2 cups
1 ½ cups
Fruits (cut in
small pieces)
2 ½ cups
Max / Pulse
Chopping blade
Carrots (cooked)
Hard Boiled Eggs
Mayonnaise
2 cups
Max / Pulse
Max / Pulse
Max / Pulse
Max / Pulse
Chopping blade
Chopping blade
Whipper
4 eggs
Max 4 cups
1 cup
Whipping cream
Whipper
* Always allow food to cool before placing in the bowl.
* Remove all bones before processing.
PROCESSING EXAMPLES USING THE SHREDDING & SLICING BLADES
SLICING
THIN SHREDDING
THICK SHREDDING
For slicing:
-
Recommended speed level is High
(Cucumbers, raw potatoes, lettuce, carrots, cabbage,
onions)
For thin shredding:
For thick shredding:
-
-
Recommended speed level is High
(Carrots, cucumbers, cabbage)
Recommended speed level is High
(Lettuce, carrots, apples)
6
5
Model EP108H
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized for normal
household use.
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid. For
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date and $12.95 to cover the cost of
return shipping and handling must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to
any unit that has been tampered with or used for commercial purposes. This limited warranty does
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty
packaging or mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event
is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
---------------------------------------------------------------------------------
OWNERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and mail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification. By
returning this card you acknowledge to have read and understood the instructions for use, and
warnings set forth in the accompanying instructions.
RETURN TO EURO-PRO Operating LLC, 4400 Bois Franc, St-Laurent, QC, H4S 1A7
Model EP108H
_____________________________________________________________________
Appliance model
_____________________________________________________________________
Date purchased
Name of store
_____________________________________________________________________
Owner’s name
_____________________________________________________________________
Address
City
Prov.
Postal code
Printed in Turkey
7
|