®
Bush Hog TOUGH
Tri-Deck Flex Finishing
Mowers
Model 1500
®
BUsH HOG TOUGH FeaTUres
TOUGH Fabricated 7 Gauge Decks
TOUGH Commercial Grade spindles
TOUGH 5 Year Gearbox Limited Warranty
TOUGH Kevlar reinforced Belts
Model 1100
TOUGH 4x4 Inch Boxed Wing section Lift arms
TOUGH Powder Coat Paint
MODeLs
TD-1100
11 ft
TD-1500
15 ft
TD-1700
17 ft
Cutting Width
Cutting Height
Transport Width
Transport Height
Transport Length
Minimum Tractor HP*
Type Hitch
3/4
1/4
1/2
1/2
1/2
1/2
inches
to 4
inches
1
to 4
inches
1
to 4
6 ft 6 inches
6 ft 3 inches
12 ft
8 ft
8 ft
8 ft
14 ft
9 ft
14 ft
30 PTO
40 PTO
40 PTO
Pull Type, Clevis Hitch, Three-Position Adjustment
Gearbox
45 HP center wings/80 HP transfer box for all 3 models
Tractor PTO speed
Driveline size
540 RPM
540 RPM
Category 4 80° CV (Main) - Category 3 (Decks)
4 x 4 inch Boxed Section
540 RPM
Wing section Lift arms
Wing Flex
4 x 4 inch Boxed Section
30° Up & 10° Down
4 x 4 inch Boxed Section
30° Up & 10° Down
30° Up & 10° Down
Wing Deck Flex
Tire size
10° Side to Side, 10° Front to Rear - Independent of the Wing Frame
23 x 8.5 (2)
23 x 9.5 (2)
(3) 4 ft
23 x 8.5 (2)
(3) 6 ft
Deck Widths
(1) 6 ft and (2) 5 ft
Deck Plate
7 gauge
7 gauge
7 gauge
Blade Tip speed
Gauge Wheels
Belt
18,468 FPM
10 x 4 inches
18,271 FPM (18,231 Wings)
13 x 5 inches
18,271 FPM
13 x 5 inches
(1) per Deck “B” size Kevlar
Spring Loaded Idler
6 inches
(1) per Deck “B” size Kevlar
Spring Loaded Idler
6 inches
(1) per Deck “B” size Kevlar
Spring Loaded Idler
6 inches
Belt adjustment
Deck Overlap
1/2
1/2
1/2
inches
Blade Overlap
Front roller size (Standard)
approximate Weight
Options (TD-1100 only)
1
inches
1
inches
1
3 x 5 inches
2450 lbs
3 x 5 inches
2752 lbs
3 x 5 inches
2855 lbs
Underside roller kit for each deck, double acting hydraulic cylinder conversion kit
Warranty
1 year limited warranty with a 5 year gearbox limited warranty
• Rear discharge • High blade tip speeds
FeaTUres
*Minimum horsepower will be subject to change due to mowing conditions
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 9
|