Califone CD Player 1886 User Manual

Model 1886  
Multimedia Player/Recorder  
User Manual  
 
Table of Contents  
Model 1886 Multimedia  
Player/Recorder  
1. IMPORTANT SAFETY INSTRUCTIONS  
2. PACKAGE CONTENTS  
4
6
6
3. PART NAMES AND FUNCTIONS  
4. SETUP AND INSTALLATION  
4.1 AC OPERATION  
7
7
7
7
Thank you for purchasing the Califone® Model 1886 Multimedia  
Player/Recorder  
4.2 BATTERY OPERATION  
4.3 CONNECTING HEADPHONES  
5. BASIC OPERATION  
5.1 RADIO OPERATION  
8
product for its warranty coverage, to sign up to receive our  
newsletter, download our catalog, and learn more about the complete  
line of Califone® audio visual products, including portable and installed  
wireless PA systems, multimedia players and recorders, headphones  
and headsets, computer peripheral equipment, visual presentation  
products and language learning materials.  
8
5.2 CASSETTE OPERATION  
5.3 CD OPERATION  
5.4 PLAYING FROM USB / SD STORAGE MEDIA  
5.5 MISC FUNCTIONS  
8
11  
12  
13  
14  
5.6 ENCODE (RECORD) MODE  
6. TROUBLESHOOTING  
7. SPECIFICATIONS & FEATURES  
8. WARRANTY  
15  
16  
17  
califone.com  
3
 
WARNING: Changes or modifications to this unit not expressly approved  
by the party responsible for compliance could void the user’s authority to  
operate the equipment.  
1. IMPORTANT SAFETY INSTRUCTIONS  
Before using this product, read the instruction manual for important safety  
information. Please retain this manual for future reference and warranty  
information.  
IMPORTANT  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
Troubleshooting & Servicing  
Do not attempt to service or repair the device yourself. Refer all servicing  
to qualified service personnel. Do not attempt to modify the device in any  
way. Doing so could invalidate your warranty.  
(1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may  
cause undesired operation.  
The unit’s circuitry may cause interference to nearby radios. To prevent  
interference, either switch the unit off or move away from the affected  
radio.  
Moisture and heat sources  
Do not use this apparatus near water (for example, sinks, baths, pools) or  
expose it to rain, moisture, dripping or splashing liquids. Do not expose  
the unit to high temperatures, high humidity or direct sunlight.  
NOTE: This equipment has been tested and found to comply within the  
limits for a class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Cleaning  
When cleaning the device, please use a soft, dry cloth. Never use  
benzene, paint-thinner, or other chemicals on the device.  
Location  
Place the device in stable location, so it will not fall causing damage to  
the device or bodily harm.  
Intended use  
The product may only be used with the original parts intended for it. The  
product may only be used in closed and dry rooms. The intended use  
includes adherence to the specified installation instructions. The  
manufacturer accepts no liability for damage arising due to improper use.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio / TV technician for  
help.  
NOTE: Shielded cables may be required to be used with this unit to en-  
sure compliance with the Class B FCC limits.  
SAFETY CERTIFICATION  
This device is made and tested to meet safety standards of the U.S.  
Department of Health and Human Services, and also with FDA Radiation  
Performance Standards 21 CFR Subchapter J.  
LASER SAFETY  
This unit employs an optical laser beam system in the CD mechanism,  
designed with built-in safeguards. Do not attempt to disassemble; refer to  
qualified service personnel. Exposure to this invisible laser light beam may be  
INVISIBLE LASER  
RADIATION WHEN  
harmful to the human eye.  
OPEN AND INTERLOCK  
FAILED OR DEFEATED.  
AVOID DIRECT EXPO-  
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR ADJUST-  
MENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN,  
SURE TO LASER BEAM. MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE.  
califone.com  
califone.com  
4
5
 
1. Function Selector Switch  
2. Condenser Microphone  
3. Headphone Jack  
4. CD Compartment  
5. CD Door Open Button  
6. FM Antenna  
7. Tuning Dial Scale  
8. Band Switch  
9. Tuning Control  
16. CD Up/F.F. Button  
17. CD/USB/SD Button  
18. Pause Button  
19. Stop / Eject Button  
20. Fast Forward Button  
21. Rewind Button  
22. Play Button  
23. Record Button  
24. Cassette Compartment  
25. CD Display  
2. PACKAGE CONTENTS  
1886 Multimedia Player/Recorder with external power adapter (at-  
tached)  
User Manual  
3. PART NAMES AND FUNCTIONS  
10. CD DN/REW Button  
11. Volume Control  
12. Folder+ Button  
1
3
4
5
6
7
9
26. Left Speaker  
27. Right Speaker  
2
8
13. Prog/Repeat Button  
14. CD Stop Button  
15. CD Play / Pause Button  
28. USB Connector  
29. SD/MMC Card Slot  
30. Encode Button  
4. SETUP AND INSTALLATION  
4.1 AC OPERATION  
1. Ensure the unit is off. To turn off the unit, slide the FUNCTION  
D
I
G
I
T
A
L
10  
SELECTOR SWITCH to the "OFF" position.  
TUNING  
29  
28  
17  
30  
11  
13  
FOLDER  
12  
14  
2. Before operation please be sure that the voltage on the power  
adapter corresponds to the AC voltage of your local area. Unravel  
the AC Line Cord, insert one end into the AC jack on the set, and the  
other end into a standard AC outlet.  
DN/R  
EW  
OPEN  
UP/F  
.F  
.
SD / MMC CARD  
PAUSE  
STOP/EJ.  
F.FWD  
REWIND  
PLAY  
RECORD  
CD/USB/SD  
ENCODE  
15  
16  
26  
POWER  
FM.ST  
27  
4.2 BATTERY OPERATION  
PORTABLE RADIO COMPACT DISC PLAYER  
1. Ensure the unit is off. To turn off the unit, slide the FUNCTION  
SELECTOR SWITCH to the "OFF" position.  
2. IMPORTANT: Disconnect the power adapter from the AC main  
power.  
3. Open the BATTERY COMPARTMENT DOOR and insert C (UM-2)  
size x 8 batteries (not included) making sure that the indicated  
battery polarity is observed.  
21  
18 19 20  
22 23  
24  
25  
4.3 CONNECTING HEADPHONES  
1. Decrease the volume to minimum.  
2. Connect the headphones to the PHONE jack.  
3. Increase the volume to the desired listening level.  
CAUTION: Avoid excessive volume for long periods of time as this can  
result in hearing damage.  
califone.com  
califone.com  
6
7
 
HANDLING CASSETTE TAPES  
5. BASIC OPERATION  
If the tape is loose in its cassette, take up the slack by inserting a  
pencil in one of the reels and rotating if the tape is loose it may get  
stretched, cut, or caught in the cassette.  
5.1 RADIO OPERATION  
1. Slide the FUNCTION SELECTOR SWITCH to the RADIO  
position.  
Do not touch the tape surface.  
To prevent recording from being erased accidentally, remove the  
tab(s) A and B.  
2. Slide the BAND switch to the desired waveband. Turn the  
TUNING KNOB to your desired radio station.  
3. Adjust the sound level by rotating the VOLUME CONTROL  
KNOB.  
To record after the tabs have been broken off reseal the slots A and  
B with a piece of adhesive tape.  
4. To turn off the radio, slide the FUNCTION SELECTOR SWITCH  
to OFF position.  
5. For Stereo FM reception, slide the BAND Switch to the FM  
position. The FM STEREO indicator will light when listening to a  
strong station that is broadcasting in stereo.  
NOTES:  
CASSETTE DECK MAINTENANCE  
The heads, capstan and pinch roller should be cleaned from time to time  
to prevent buildup of tape oxide, which degrades performance. We  
recommend cleaning after every 20-30 hours of operation.  
1. Press the Stop/Eject key to open the deck door.  
2. Remove cassette tape before cleaning.  
3. Clean the head of all visible, reddish-brown oxide with a cotton-  
tipped swab moistened with a methyl alcohol or any solution specifi-  
cally manufactured for this purpose.  
CAUTION: DO NOT scrape the head surface with hard, sharp or abra-  
sive objects. This will permanently damage the heads.  
4. Clean the pinch roller by scrubbing the surface of the roller with the  
moistened swab. Rotate the roller by hand until the entire surface is  
clean.  
5. Clean external case surfaces with a moist, soft cloth. Use only a mild  
detergent water solution.  
For FM, pull out the telescopic antenna. To improve FM reception  
extend and reposition the antenna, reduce its length if the FM-signal  
is too strong (very close to a transmitter).  
For AM, SW1 & SW2, the set is provided with a built-in aerial, so  
there is no need to use the telescopic aerial, the aerial can be  
directed by turning the whole set.  
5.2 CASSETTE OPERATION  
1. Press the STOP/EJECT button to open the cassette door.  
2. Insert a cassette tape into the CASSETTE COMPARTMENT and  
push the cassette door to close.  
3. Slide the FUNCTION SELECTOR SWITCH to TAPE position.  
4. Press the PLAY button. Adjust the VOLUME CONTROL KNOB  
to your desired listening level.  
HEAD DEMAGNETIZATION  
It is recommended that the tape heads be demagnetized from time to  
time. This eliminates residual magnetism which degrades sound  
reproduction and the recording function.  
1. After cleaning the heads and capstan, place the demagnetizer sev-  
eral feet away from the cassette unit and plug it into an AC outlet.  
2. Follow the manufacturer’s operating instructions supplied with the  
demagnetizer.  
5. To stop the tape, press the STOP/EJECT button.  
FAST FORWARD AND REWIND  
The tape can be fast FORWARDED or REWOUND by pressing the  
FAST FORWARD button or REWIND button respectively.  
PAUSE FUNCTION  
During playback or recording, the tape can be stopped temporarily  
by pressing the PAUSE button. To continue playback or recording,  
press the PAUSE button once again.  
RECORDING FROM THE RADIO TO CASSETTE DECK  
1. Tune to a desired radio program as described in the "RADIO  
OPERATION" section.  
2. Insert a blank cassette tape into the CASSETTE COMPARTMENT.  
3. Press the PAUSE button.  
4. Press the RECORD button. The PLAY button is engaged  
simultaneously to start recording. With the built-in Automatic Level  
Control (ALC), the best recording quality is automatically adjusted.  
Changing the volume level will not affect the recording.  
AUTO STOP SYSTEM  
When the tape runs to its end during playback or recording, the  
cassette operation will be stopped automatically.  
CAUTION: To avoid damage to the cassette mechanism or to the  
cassette tapes, always press the STOP/EJECT button between each  
operation.  
califone.com  
califone.com  
8
9
 
5. To activate recording, release the PAUSE button.  
6. To stop recording temporarily, press the PAUSE button. To continue  
the recording, press the PAUSE button once again.  
7. Press the STOP/EJECT button to stop recording.  
8. When the tape runs to its end, the cassette operation will be stopped  
automatically.  
5.3 CD OPERATION  
HANDLING COMPACT DISCS  
This unit is designed to play only compact discs bearing the identification  
logo below.  
Other discs may not conform to the CD standard and may not play  
properly.  
RECORDING FROM THE BUILT-IN CONDENSER MICROPHONE TO  
CASSETTE DECK  
1. Set the FUNCTION SELECTOR SWITCH to the TAPE position.  
2. Open the CASSETTE COMPARTMENT by pressing the STOP/  
EJECT button and insert a blank tape into the CASSETTE  
COMPARTMENT. Close the door gently.  
3. Press the RECORD button and PLAY button simultaneously to start  
the recording process. This process will record the signals that are  
received by the built-in CONDENSER MICROPHONE.  
4. Press the STOP/EJECT button when finished.  
Dirty, scratched or warped discs  
may cause skipping or noise.  
INSERT WITH  
THE LABEL  
FACING UP.  
PRESS THE CLAWS  
ATTHE CENTER OF  
THE DISC CASE.  
Handle the disc only by the edges. To  
keep clean, do not touch its surface.  
Discs should be stored in their  
cases after use to avoid serious scratches.  
Do not expose disc to direct  
PRESS THE  
DISC GENTLY  
TO INSERT IT.  
LIFT OUT WITHOUT  
TOUCHING THE  
RECORDED SURFACE.  
sunlight, high humidity, high  
INCORRECT  
temperature, dust, etc.  
NOTE: Monitoring during MICROPHONE recording is not possible.  
Prolonged exposure to extreme  
temperatures can warp the disc.  
Do not stick or write anything on either  
side of disc. Sharp writing instruments or  
the inks used in some felt tip pens may  
damage its surface  
CORRECT  
INCORRECT  
RECORDING FROM THE CD PLAYER TO CASSETTE DECK  
1. Slide the FUNCTION SELECTOR SWITCH to "CD" position.  
2. Put a CD into the CD COMPARTMENT with the label side upward.  
3. Insert a blank cassette into the CASSETTE COMPARTMENT and  
press PAUSE button of the cassette deck.  
4. Press RECORD button and PLAY button simultaneously for  
recording stand-by. With the built-in ALC, the best recording quality is  
adjusted automatically.  
FROM THE CENTER TO THE EDGE  
Remove the disc  
To pick up the disc, hold the edge and  
gently press the center pivot  
as illustrated.  
5. Activate the CD players, playing in a desired TRACK as described  
in the COMPACT DISC PLATER OPERATION section. Release the  
PAUSE button of the cassette deck to start recording.  
6. To stop recording temporarily, press the PAUSE button. To continue  
recording, press the PAUSE button again.  
CAUTION: Wait for the disc to stop rotating before  
pressing the OPEN button.  
NOTE: This unit can play 3” (8 cm) single CDs  
without an adapter. Do not use a CD single adapter for these discs.  
7. Press STOP/EJECT button of the cassette deck to stop  
recording. Then stop CD playback by pressing the STOP button of  
the CD player.  
CLEANING DISCS  
Finger prints should be carefully wiped from the surface of disc with a soft  
cloth. Unlike conventional records, compact discs  
have no grooves to collect dust and microscopic  
debris, so gently wiping them with a soft cloth  
should remove most particles. Wipe in a straight  
motion from the center to the edge. Never use  
thinner, benzine, record cleaner or anti-static  
spray on a compact disc. Such chemicals can  
damage its plastic surface.  
NOTE: Should skipping of tracks occur during CD playback, try turning  
the volume down. When CD is playing, do not open the CD Door.  
califone.com  
califone.com  
10  
11  
 
is open. Make sure the CD door is closed during USB/SD Playback.  
This system is able to playback most MP3 and WMA format files  
stored on the memory media with a USB connector and SD Card.  
This includes the Califone® 8100 MP3 Player/Recorder using a  
standard USB cable and iPod® devices using appropriate iPod® dock  
connector to USB connector.  
When the PLAY/PAUSE button is pressed while playback is stopped,  
the first track will be played. The LCD DISPLAY will show the specific  
number of track being played.  
PLAYING COMPACT DISCS  
1. Select FUNCTION SELECTOR SWITCH to MODE.  
2. Press the CD door open button to open the CD DOOR. Put a CD into  
the CD COMPARTMENT and close the CD DOOR.  
3. When the CD DOOR is closed, the disc will automatically begin  
playback.  
4. If the CD DOOR is not closed or there is no disc inside, the DISPLAY  
will show "OPN" or "NOd".  
CAUTION: Improperly connecting the USB Storage Media or SD/MMC  
Card upside down could damage the unit or the USB Storage Media or  
SD/MMC Card.  
NOTE: This unit can read CD-RW discs, however not all types of CD-RW  
discs are compatible.  
PLAYING COMPACT DISCS WITH MP3/WMA FILES  
1. Select FUNCTION SELECTOR SWITCH to MODE.  
2. Press the CD door open button to open the CD DOOR. Put an MP3  
disc into the CD COMPARTMENT and close the CD DOOR.  
3. When the CD DOOR is closed, the disc will automatically begin  
playback.  
4. Use the REW and F.F. buttons to skip between tracks. If some files  
are within folders on the disc, use the FOLDER+ button to enter each  
folder and play the files.  
5.5 MISC FUNCTIONS  
SKIP AND SEARCH MODE  
During Play or Pause mode, press the UP/F.F. or DN/REW button  
once to go to next track or previous track.  
During Play or Pause mode, press and hold the UP/F.F. or DN/REW  
button to search within a track and the elapsed time will be shown on  
the Display.  
Release the UP/F.F. or DN/REW button once the desired time is  
reached.  
5. If the CD DOOR is not closed or there is no disc inside, the DISPLAY  
will show "OPN" or "NOd".  
NOTE: This unit can read and play compact discs with MP3 and WMA  
files on them, however not all such discs and filetypes are compatible.  
PROGRAM MODE  
1. First, press the STOP button to ensure that playback is stopped.  
Note that it is not possible to program while the CD/USB/SD are  
playing.  
5.4 PLAYING FROM USB / SD STORAGE MEDIA  
2. Press the PROG button, the display will show "P01" and "000" in  
flashing. “P01” for the program location, and “000” for your desired  
songs.  
3. Then press UP/F.F. or DN/REW. button to search for the track to be  
stored.  
4. Press the PROG button to store the track.  
5. Continue entering tracks in this way until all the desired tracks are  
stored (up to a limit of 20 tracks).  
6. Press the PLAY/PAUSE button once to start playing the first  
programmed track.  
To play files from USB/SD storage media, follow these steps:  
1. Slide the FUNCTION SELECTOR SWITCH to the MODE position.  
2. Remove the rubber cover of the USB Connector  
3. Before connecting the USB/SD media to the unit, make sure the port  
is in the correct direction and will connect. Then connect the USB  
Storage Media or SD card.  
4. Press CD/USB/SD button to switch function between operation of the  
CD, USB, and SD card. The LCD will indicate with text and an icon,  
which mode it is in.  
5. The system will automatically start playing the files on the USB / SD  
card.  
6. Use the REW and F.F. buttons to skip between tracks. If some files  
are within folders on the disc, use the FOLDER+ button to enter each  
folder and play the files. The folder number will flash for 3 seconds.  
NOTES:  
7. During the playback of Programmed tracks, the PROG Indicator on  
the LCD display will remain lighted.  
8. To clear/stop programmed play, press the STOP button.  
It is not possible to operate the USB/SD functions when the CD door  
califone.com  
califone.com  
12  
13  
 
REPEAT MODE  
REPEAT SINGLE TRACK  
COPYING FILES FROM USB/SD STORAGE MEDIA  
1. Select and Play the desired song on the USB or SD card.  
2. When the song is being played, press and hold the ENCODE button  
until the display shows “ENC”. (It will take about 3 seconds)  
3. To successfully copy to the Storage Media, do not interfere the unit  
until copying is completed. To stop the copying process, press the  
STOP button.  
To continually repeat playback of a single track, first play the track.  
During playback, press the REPEAT button once.  
The “REP” indicator will light on the LCD display.  
REPEAT ALL TRACKS IN FOLDER  
To continually repeat playback of all tracks in a folder on the storage  
media, first start playback of the first track in the folder.  
During playback, press the REPEAT button twice.  
6. TROUBLESHOOTING  
The “REP” and “FOLDER” indicators will light on the LCD display.  
Freezing / Problem occur during unit  
operation.  
Should the unit Freeze or exhibit problem  
during operation, turn off the unit and  
disconnect the power supply and then  
restart.  
REPEAT ALL TRACKS  
To continually repeat playback of all tracks on the storage media, first  
start playback of the first track.  
During playback, press the REPEAT button three times.  
The “REP” and “ALL” indicators will light on the LCD display.  
To cancel Repeat ALL tracks within FOLDER, press REPEAT button  
once more and the REP ALL indicator will go off.  
CD-RW disc does not play.  
This unit can read CD-RW discs, how-  
ever not all types of CD-RW discs are  
compatible. Thus the full  
playability with all CD-RW disc is not  
guaranteed.  
5.6 ENCODE (RECORD) MODE  
No Playback via USB Flash Player / USB Due to the variance in the use of USB  
NOTES:  
/ SD Card.  
Flash Players software and capacity of  
the USB / SD Card, not all USB MP3  
Players / USB / SD Card are compatible  
in the unit.  
It is not possible to encode or record during STOP mode or while no  
storage media (USB or SD/MMC) is connected to the unit.  
If using USB Storage Media, make sure it’s powered on and NOT in  
“HOLD”/”LOCKED” mode. If using an SD/MMC card, make sure the  
write protect tab is NOT in the LOCK position.  
Problem occur during playback of songs  
via USB / SD Card.  
Due to the variance in MP3 or WMA  
transferring, some files may not be  
supported.  
ENCODING (FOR CD PLAYBACK)  
1. Select and play the CD song.  
Not able to Encode (Record) to USB /  
SD Card  
Should the memory in the USB / SD card  
reach capacity, use a computer to access  
and delete files to make enough free  
space.  
2. When the song is being played, press and hold the ENCODE button  
till the display shows “ENC”. (It will take about 3 seconds)  
3. To successfully copy the whole song to the storage media, do not  
press any buttons on the unit until copying is completed.  
4. To manually stop the copying process, press the STOP button. If the  
STOP button is pressed during the Encode (Record) process, the  
song being Encoded (Recorded) to the Storage Media will also stop  
at the same time.  
Make sure the write protect tab of SD  
Card is NOT in LOCK position.  
Make sure the USB Storage Media is  
powered on and NOT in “HOLD” mode.  
5. NOTE: The song will play through the speakers while it is being cop-  
ied to the storage media.  
6. The songs copied onto the storage media will be stored inside a  
folder “MP3“ or “CDROM” (depending on the type of CD) and the  
songs will be named “TRACK01”, “TRACK02”, etc.  
califone.com  
califone.com  
14  
15  
 
7. SPECIFICATIONS & FEATURES  
8. WARRANTY  
Califone warrants this product to be free from defective material and  
workmanship for one year from the purchase date. Our “Project Inter-  
cept” Customer Satisfaction program will replace defective parts and  
repair malfunctioning equipment under this warranty when the defect  
occurs under normal use.  
Radio Frequency Range  
Power requirements  
AM:  
FM:  
530 - 1600 kHz  
88 - 108 MHz  
8 “C” size alkaline batteries OR 110-  
240VAC -> 12VDC power adapter  
(attached)  
All Damage Claims Must Be Made With the Freight Carrier  
No. of Channels  
Output Power  
2 Channels (Stereo)  
Notify the freight carrier immediately if you observe any damage to the  
shipping carton or product. Repack the unit in the carton and await  
inspection by the carrier’s claim agent. Notify your dealer of the pending  
freight claim.  
1.8 W x 2  
CD Compatibility  
CD / MP3/WMA-CD / CD-R / CD-RW  
Digital Audio File Compatibility  
MP3, WMA  
Compatible USB/SD Card Capacities  
16MB / 32MB / 64MB / 128MB / 256MB /  
512MB / 1GB / 2GB  
Returning Your Unit for Service or Repairs  
Should your unit require service, contact our Customer Service Depart-  
ment online at califone.com/techsupport or via email warranty@califone.  
com or by phone at 800-722-0500 / 818-407-2400 to first obtain an RA  
(Return Authorization) number before returning it to Califone. The unit  
must be returned to our factory via prepaid transportation only after the  
factory issues an RA number, which must be clearly written on the out-  
side of the box.  
Encoding (Recording) format (CD to USB / 128 kbps MP3 format  
SD)  
Product Dimensions  
13x 10x 5.5”  
4.5 lbs  
Product Weight (incl. accessories)  
califone.com  
califone.com  
17  
16  
 
 
Califone® International, Inc.  
1145 Arroyo Avenue, #A  
San Fernando, CA 91340 USA  
Toll Free 800.722.0500 | Toll Free Fax 877.402.2248  
International Customers call 818.407.2400 or Fax 818.407.2405  
califone.com  
Califone 1886 Rev 02 1109  
 

BenQ Computer Monitor FP71V+ User Manual
Black Decker Carpet Cleaner FSM1610 User Manual
Bloomfield Convection Oven WVOC G136 User Manual
Bowers Wilkins Speaker VM6 User Manual
Braun Blender MR 6500 BC User Manual
Broan Ventilation Hood QT230BL User Manual
Canon Photo Scanner LIDE 200 User Manual
Canon Projector LV X1 User Manual
Casablanca Fan Company Outdoor Ceiling Fan K134F User Manual
Chamberlain Garage Door Opener 2500DC User Manual