Chauvet All in One Printer F 1050 User Manual

Troubleshooting  
If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the  
external fuse, remote connection and main power supply. If all appear to be OK, plug the unit in again. If  
fog does not come out after holding the remote control button for 30 seconds, check the hose attached to  
the tank to make sure there is fluid going through the hose. If you are unable to determine the cause of the  
problem, do not simply continue to push the remote control button as this may damage the unit. Contact  
CHAUVET for servicing.  
Contact Chauvet  
USA  
Tecnical Assistance: 1-800-762-1084 (954) 929-1115  
Caution  
• Never remove the Fluid tank from the unit as this will damage the fluid level sensors.  
• Never use any other type of liquid other than UNSCENTED water based fog fluid.  
• Use of any other fluids or additives will void the warrantee  
• Do not obstruct the nozzle. Fog output is very hot, avoid coming within 60cm (24") of the nozzle during  
operation. Never aim the nozzle directly at people or naked flames.  
• Danger of Burns. Keep out of reach of children. Do not leave machine unattended.  
• Output nozzle becomes very hot during operation (300oC). Keep flammable materials at least 50cm (20")  
away from the nozzle.  
• Always allow the fogger to cool down before cleaning or servicing.  
• Never drink fog liquid. If its ingested, call a doctor immediately. If fog fluid comes into contact with skin or  
eyes, rinse thoroughly with water.  
• Beware of condensation around the nozzle. Consider carefully when mounting.  
• All fog machines may splutter small amounts of fog occasionally during operation and for a minute or so  
after being turned off.  
Fog Machine  
• Never place the fog machine on any flammable material (i.e. carpet, fabric etc.) during operation. All fog  
machines generate a considerable amount of heat. When placed on the floor, fog machines should always  
be placed on a non-flammable surface such as concrete or tile.  
F-1050  
• Depending on the amount of fog generated, all fog machines may set off smoke detectors.  
Power Connections  
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other  
connections be required they must be carried out with the following configuration.  
Earth = Green/Yellow cable  
User Guide  
Neutral = Blue cable  
Live = Brown cable  
Please read these instructions carefully before use  
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.  
In the UK, it is required that all mains plugs are fitted with 5A fuses.  
Technical Specifications  
Power Input:  
Fog Output:  
AC 120V 60 Hz or 230V 50 Hz  
5000 Cubic Feet per Minute  
1.0 Liter  
Fuse:  
10A 125V or 5A 250V  
7.7 lbs / 3.5 Kg  
Tank Capacity:  
Weight:  
Dim:  
18.1 x 5.2 x 8 in  
460 x 132 x 203mm  
User Informtion (Please complete for your records)  
Date Purchased:  
/
/
Serial No: ________________  
 
Work on internal parts should be carried out by a qualified technician. Removal of any covers is considered  
a breach of warranty and will not be covered under any such agreement unless authorized first by Chauvet.  
 

Belkin Network Router F7D3302 User Manual
Bolens Lawn Mower 110 140 306 User Manual
Bosch Power Tools Grinder 1380 SLIM User Manual
Bosch Power Tools Router PR10E User Manual
Brinkmann Charcoal Grill Dual Zone Charcoal Grill User Manual
Calibre UK Computer Monitor 30W User Manual
Campbell Hausfeld Welder WS0970 User Manual
Carbine Stereo Receiver M9900DVDS User Manual
Carrier Heat Pump 50VQP084 300 User Manual
Chief Manufacturing Indoor Furnishings MF1 Series User Manual