Chicago Electric Fan 66878 User Manual

20” HigH velocity Air  
circulAtor  
66878  
Set up And operAting inStructionS  
®
distributed exclusively by Harbor Freight tools .  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
visit our website at: http://www.harborfreight.com  
read this material before using this product.  
Failure to do so can result in serious injury.  
reAd And SAve tHeSe inStructionS.  
©
®
Copyright 2009 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork  
contained herein may be reproduced in any shape or form without the express written consent of  
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing  
improvements, actual product may differ slightly from the product described herein. Tools required for  
assembly and service may not be included.  
For technical questions or replacement parts, please call 1-800-444-3353.  
 
cAution, without  
the safety alert  
symbol, is used to address  
practices not related to  
personal injury.  
manual cannot cover all conditions  
and situations that may occur. It must  
be understood by operator that com-  
mon sense and caution are factors  
which cannot be built into this prod-  
uct, but must be supplied by operator.  
Additional Safety instructions  
1. Maintain labels and nameplates on  
the tool. If unreadable or missing,  
contact Harbor Freight Tools for a  
replacement.  
2. Do not run Power Cord under car-  
peting. Do not cover cord with throw  
rugs, runners or similar coverings. Ar-  
range cord away from traffic area and  
where it will not be tripped over. Do  
not let cord hang over edge of table  
or counter, or touch hot surfaces. Do  
not pull on cord.  
3. Use only in dry environments. Do not  
use in bathrooms, laundry area, near  
sinks or other sources of water.  
4. This product is not a toy. Keep it out  
of reach of children.  
5. WARNING: Handling cord on this  
product will expose you to lead,  
a chemical known to the State of  
California to cause cancer, and birth  
defects or other reproductive harm.  
Wash hands after handling. (Califor-  
nia Health & Safety Code § 25249.5,  
et seq.)  
6. People with pacemakers should  
consult their physician(s) before use.  
Electromagnetic fields in close prox-  
imity to heart pacemaker could cause  
pacemaker interference or pacemak-  
er failure.  
7. The warnings, precautions, and in-  
structions discussed in this instruction  
rev 09f  
SKU 66878  
For technical questions, please call 1-800-444-3353.  
Page 3  
 
SpeciFicAtionS  
Electrical Requirements 120 V~ / 60 Hz / 1.6A  
Low: 1225 RPM  
Speeds (approx.)  
Medium: 1360 RPM  
High: 1480 RPM  
HouSeHold uSe only  
e144918  
unpAcking  
When unpacking, make sure that the  
item is intact and undamaged. If any parts  
are missing or broken, please call Harbor  
Freight Tools at 1-800-444-3353 as soon  
as possible.  
Save this Manual  
Keep this manual for the safety warn-  
ings and precautions, assembly, operat-  
ing, inspection, maintenance and cleaning  
procedures. Write the product’s serial  
number in the back of the manual near the  
assembly diagram (or month and year of  
purchase if product has no number). Keep  
this manual and the receipt in a safe and  
dry place for future reference.  
ASSeMBly  
read the entire ruleS For  
SAFe operAtion section at  
the beginning of this manual  
including all text under  
subheadings therein before set  
up or use of this product.  
SKU 66878  
For technical questions, please call 1-800-444-3353.  
Page 4  
 
to prevent  
SeriouS injury  
4. Insert the ends of the Stand Base (3)  
into the Stand Arms.  
FroM AccidentAl  
operAtion or electric  
SHock:  
Before assembly, cleaning or  
adjustment, make sure the  
switch is turned off, the cord  
is unplugged, and the unit has  
cooled.  
5. Align the holes in the sides of the  
Stand pieces and thread the Screws  
in place.  
6. Adjust the body of the fan to the de-  
sired angle, then Tighten the Adjust-  
ment Knobs.  
note: For additional information regarding  
parts listed, refer to Assembly dia-  
gram at the back of the manual.  
operAtion  
read the entire ruleS For  
SAFe operAtion section at  
the beginning of this manual  
including all text under  
Fan Body (1)  
Adjustment  
Knob (4)  
subheadings therein before set  
up or use of this product.  
1. Turn the knob on the back of the Fan  
Body (1) to Off.  
2. Set the Fan on a dry, stable surface.  
Stand  
Arm (2)  
3. Plug the power cord into a standard  
120V AC outlet.  
4. Turn the Knob on the back of the fan  
to the desired setting: Low, Medium  
or High.  
Screw (5)  
5. Adjust the tilt of the Fan Body by  
loosening the Adjustment Knobs (4),  
changing the tilt of the body, then  
tightening the Adjustment Knobs.  
Stand Base (3)  
Figure 1  
1. Place the Fan Body (1) on a flat and  
6. When done, turn the Knob on the  
back of the Fan Body to Off and un-  
plug.  
stable surface.  
2. Remove the Screws (5) and set  
aside.  
note: It is normal for the motor of the  
Fan to feel warm to the touch dur-  
ing operation. The motor is thermally  
protected and will automatically shut  
off when it overheats for any reason.  
If this happens, immediately discon-  
nect the Fan from the power outlet.  
3. Slide the Adjustment Knobs (4) onto  
the bolts on the Stand Arms (2) and  
loosen the Stand Arms slightly by  
turning the Adjustment Knobs counter  
clockwise.  
SKU 66878  
For technical questions, please call 1-800-444-3353.  
Page 5  
 
Allow to completely cool down before  
turning on again.  
inSpection And  
MAintenAnce  
The motor bearings are permanently  
lubricated at the factory and do not  
require any additional lubrication.  
to prevent  
SeriouS injury  
FroM AccidentAl  
operAtion or electric  
SHock:  
Before appliance inspection  
or maintenance, make sure  
the appliance’s switch is  
turned off, the cord is  
unplugged, and the unit has  
cooled completely.  
to prevent SeriouS  
injury FroM AppliAnce  
FAilure:  
do not use damaged  
appliances. if abnormal  
noise or vibration occurs,  
have the problem corrected  
before further use.  
1. BeFore eAcH uSe, inspect con-  
dition of the Fan. Check for loose  
screws, misalignment or binding of  
moving parts, cracked or broken  
parts, and any other condition that  
may affect its safe operation.  
2. Clean regularly to prevent dust from  
accumulating on Blades and Grill. To  
clean:  
a. Unthread the screws along the outer  
edge of the Grill (6) and remove the  
front of the Grill.  
b. Use a damp cloth with water and a  
soft brush to clean the blades and  
the Grill. Do not use harsh chemical  
cleaners. Do not bend the blades.  
3. DO NOT IMMERSE MOTOR.  
4. Allow Fan to dry completely before  
use.  
SKU 66878  
For technical questions, please call 1-800-444-3353.  
Page 6  
 
pleASe reAd tHe FolloWing cAreFully  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM  
IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES  
ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED  
TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS  
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT  
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN By CERTIFIED AND LICENSED  
TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL RISK AND LIABILITy ARISING OUT OF  
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT  
OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.  
pArtS liSt And ASSeMBly diAgrAM  
part  
description  
Qty  
part  
description  
Qty  
1
2
3
Fan Body  
1
2
1
4
5
6
Adjustment Knob  
Screw  
Grill  
2
2
1
Stand Arm  
Stand Base  
Grill (6)  
Fan Body (1)  
Adjustment  
Knob (4)  
Stand  
Arm (2)  
Screw (5)  
Stand Base (3)  
record product’s Serial number Here:  
note:If product has no serial number, record month and year of purchase instead.  
note:Some parts are listed and shown for illustration purposes only, and are not available individually as  
replacement parts.  
SKU 66878  
For technical questions, please call 1-800-444-3353.  
Page 7  
 
liMited 90 dAy WArrAnty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high  
quality and durability standards, and warrants to the original purchaser that this prod-  
uct is free from defects in materials and workmanship for the period of 90 days from  
the date of purchase. This warranty does not apply to damage due directly or indirectly,  
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,  
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.  
We shall in no event be liable for death, injuries to persons or property, or for incidental,  
contingent, special or consequential damages arising from the use of our product. Some  
states do not allow the exclusion or limitation of incidental or consequential damages, so  
the above limitation of exclusion may not apply to you. THIS WARRANTy IS ExPRESS-  
Ly IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE  
WARRANTIES OF MERCHANTABILITy AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the com-  
plaint must accompany the merchandise. If our inspection verifies the defect, we will ei-  
ther repair or replace the product at our election or we may elect to refund the purchase  
price if we cannot readily and quickly provide you with a replacement. We will return re-  
paired products at our expense, but if we determine there is no defect, or that the defect  
resulted from causes not within the scope of our warranty, then you must bear the cost  
of returning the product.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
SKU 66878  
For technical questions, please call 1-800-444-3353.  
Page 8  
 

Black Box Network Hardware ACS2001A User Manual
Black Decker Coffeemaker DCM100BC User Manual
Blue Rhino Outdoor Fireplace WAD794SPA User Manual
Brookstone Tablet Accessory 804007 User Manual
Cabletron Systems Switch FPIM 02 User Manual
Carrier Gas Heater 48PG16 User Manual
Casio Clock Radio MA0906 EA User Manual
Casio Watch 1813 User Manual
Chevrolet Automobile 2010 Malibu User Manual
Cisco Systems Home Security System ASA 5500 User Manual