®
FAIL-SAFE
Type
DESCRIPTION
The Harmony Compass combines exceptional aesthetics with remarkable
strength. Cast, extra-heavy aluminum walls of the front/back housings offer
rugged durability and afford efficient heat dissipation. A premium,
five-stage paint finish further protects the housings. Full-round lens is
fashioned from high-quality, tempered borosilicate glass. External convex
prisms and internal sandblasted surfaces create a lens that gives a smooth,
even glow. A liquid injection-molded silicone gasket provides a water- and
dust-tight seal between the fixture's housing and front-lens assembly.
Compass is CUL-listed for wet locations in all mounting positions.
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
Application
Regressed Housing
Socket Cont.
This handsome fixture will blend
seamlessly into virtually any
unsupervised environment where
broad, low-glare light distribution
Cast housing is nominal .125"
thick, marine grade, low copper
alloy aluminum. Comes with
concealed cast aluminum plate to
socket incorporates 26-watt
GX24q3; 32-watt; GX24q3; or
42-watt GX24q4 base with
stainless-steel retention clip and a
2-pin reject that ensures proper
lamping and lamp retention.
Fluorescent socket is poly-
carbonate. Incandescent socket is
porcelain medium-base with
nickel-plated brass screw shell.
is esthetically pleasing and security seal regressed housing to front
lens face. Two back-box
configurations are available
essential: shopping centers,
roadside malls, corporate building
exteriors or transportation stations. depending on installation. The BB
option is for stud wall and other
Lens
Affording optimal
combustible material applications
and comes with adjustable
brackets for 18" to 24" on center
spacing. The CP option is for
concrete pour and other
Ballast
shock-resistance, full-round,
molded, tempered borosilicate
glass is 0.225 inches thick and
floats on gasket. Dissipates heat
and is unaffected by UV light,
pollution and cleaning solutions.
Relamping hook holds lens
assembly for easier maintenance.
CFL ballasts are electronic
universal voltage 120-277V, less
than 10% harmonic distortion with
minimum starting temperature of
-18°C (0°F). HID ballasts are
standard HPF core & coil with
minimum starting temperatures of
-40°C (-40°F) for HPS and -30°C
(-20°F) for MH.
COMPASS 12"
noncombustible material
applications and comes with an
adjustable bracket to
Harmony(TM)
26W - 42W
Compact
accommodate variable wall
thickness. A quick-connect plug
wiring system allows for easy
installation. Back box may be
shipped separately for early
installation (see REGRESSED
HOUSING MOUNTING AND
ADVANCED ORDERING
Fluorescent
Optics
Internal, sandblasted matte finish
and external, half-inch, convex
pillow prisms spread lamp image
and provide an even glow. Fixture
boasts white 95% TR internal
diffuser. Arc tube is centered
within the fixture to provide
rotationally symmetrical
50W - 100W
High Pressure Sodium
Metal Halide
Fasteners
Four stainless-steel TORX® screws
with center reject pin. Screw heads
are recessed into casting to
maximize tamper-resistance.
Sealed with a gasket, fasteners are
captive.
INFORMATION). Wall mount only.
75W - 100W
Incandescent
Gaskets
Long-life, injection-molded silicone
gasket promotes water- and
dust-tight seal between housing
and front-lens assembly.
1/8-inch-thick, closed-cell EDPM
gasket facilitates proper seal
between luminaire and mounting
surface. No additional
distribution without hot spots. For
an even softer glow, use the
optional - SW "Soft White Lens."
Finish
Finish is TGIC, textured, thermoset
polyester-powdercoat that is
applied in five-stage process at
2.0-mil thickness and baked on at
400° F. Finish is 500-hour-salt-
spray test-rated and has an impact
rating of 160 inch/pounds.
Surface Housing
Back housing is precision TruGen
die-cast for superior strength and
product uniformity. Marine-grade,
low-copper-alloy aluminum resists
corrosion. Extra-heavy thickness
promotes durability and assures an
efficient heat sink for internal
components.
caulking is required.
Lamp
(by others)
Labels
CUL wet-listed for wall and ceiling.
Socket
HID socket is a 4KV rated porcelain
medium-base socket with a
nickel-plated brass screw shell. CFL
INSIDE/OUTSIDE POLYCARBONATE
LENS COATING
RCS-12
26W-42W CT
75W-100W IN
RCS-12
50W-100W HPS/MH
RCR-12
50W-70W HPS/MH
8.875”
225mm
10”
254mm
12” dia.
305mm
12”dia.
305mm
12” dia.
305mm
8.5”
217mm
4.5"
115mm
3.75”
4.5"
115mm
95mm
Specifications and Dimensions subject to change without notice.
ADC041336
04/11/2007 9:12:09 AM
Consult your representative for additional options and finishes.
HARMONY COMPASS 12"
ORDERING INFORMATION
PHOTOMETRICS
C a n d l e p o w e r D i s t r i b u t i o n
S h i p p i n g I n f o r m a t i o n
F o o t c a n d l e M u l t i p l i e r s
For other than 8’ mounting heights
use appropriate multiplier value:
Cat. No.
Weight
7.0 lbs
13.5 lbs
17.5 lbs
13.5 lbs
17.5 lbs
RCS - 12 - XXCT
RCS - 12 - XXMH
RCR - 12 - XXMH
RCS - 12 - XXHPS
RCR - 12 - XXHPS
6'
8'
10'
12'
14'
x1.7
x1.0
x0.64 x0.44 x0.32
.
ENERGY DATA
J - B o x M o u n t i n g
SURFACE HOUSING MOUNTING
I n p u t Wa t t s :
E l e c t r o n i c
(1) 26W Compact Triple
(1) 32W Compact Triple
(1) 42W Compact Triple
H i g h P o w e r F a c t o r
(1) 50W HPS
(1) 70W HPS
(1) 100W HPS
(1) 50W MH
(1) 70W MH
Rotationally adjustable mounting bracket is
screwed to J-Box. Fixture attaches to plate
with (2) 1/4”- 20 studs and nuts.
27.0 Watts
37.0 Watts
47.0 Watts
8.5"dia.
217mm
S u r f a c e M o u n t i n g
60.0 Watts
95.0 Watts
130.0 Watts
69.0 Watts
94.0 Watts
125.0 Watts
6 knock outs are provided in casting for
mounting directly to surface. Mounting
hardware supplied by others.
(1) 100W MH
.250"dia.
Mounting K.O.
J-Box Mounting Plate
Specifications and Dimensions subject to change without notice.
Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADC041336
04/11/2007 9:12:09 AM
REGRESSED HOUSING MOUNTING AND ADVANCED ORDERING INFORMATION
R E G R E S S E D S A M P L E N U M B E R
5 11/32
3 3/8
5 11/32
3 3/8
+
R B B - 1 2
R C R - 1 2 - 5 0 M H - D T- B K - B B = R C R - 1 2 - L H - 5 0 M H - D T- B K - B B
Complete Unit
L H =L e s s
R e g r e s s e d
H o u s i n g
B B =C o m b u s t i b l e M a t e r i a l A p p l i c a t i o n
C P =B r i c k o r C o n c r e t e P o u r
Center lines
to aid in
4 15/32
1 7/16
1 19/32
placement
The following regressed housings may be
ordered in advance
RBB-12-F=For Combustible (Studwall)
Applications - Fluorescent Fixtures Only
RBB-12=For Combustible (Studwall) Applications
- HID and Incandescent Fixtures Only
RCP-12=For Non-Combustible (Brick, Concrete-
Pour) Applications - HID, Fluorescent, and
Incandescent Fixtures
Finished
fixtures
trim
EXAMPLE: RBB-12
WITH THE STUDWALL
BRACKETS
4 1/2
Do not cut
outside of
pattern
perimeter
3 1/16
3 1/16
Cut-out Template Dimensions Included
Specifications and Dimensions subject to change without notice.
Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADC041336
04/11/2007 9:12:09 AM
|