POLES
RTA ROUND TAPERED ALUMINUM
10' —40' MOUNTING HEIGHT
4
3
MH
(mounting height)
SPECIFICATION FEATURES
...
...
...
1
Cast aluminum alloy shoe base with aluminum alloy bolt
covers or base cover dependent upon base type.
4
5
Drilled or Tenon (specify).
Anchor bolt per ASTM A576 with (1) nut, (1) flat washer,
and (2) shims. Nuts, washers and threaded portion of bolt
are hot dip galvanized.
...
2
Flush reinforced 2 3/8" x 4 1/2" for 4" shafts. Hand hole
assembly with internal reinforcing frame. 3" x 5" for 5" and
6" shafts, 4" x 6" for 7", 8", 10" shafts. Ground lug located
opposite hand hole opening drilled & tapped for 3/8"
16NC-2 grounding screw.
2
18"
handhole
...
3
Tapered aluminum lighting shaft with polished finish.
1
FOUR BOLT ANCHORAGE [ See ordering information]
BC=Bolt Circle
BP=Bolt Projection
AB=Bolt Dimensions
D=Bolt Diameter
H=Bolt Dimensions
Base View
BC
FINISH COLORS [ See ordering information. Other finish colors available.]
B=Clear Anodized
D
C=Dark Bronze Anodized
D=Black Anodized
E=Medium Bronze Anodized
F=Dark Bronze Powder Coat
V=Grey Powder Coat
BP
AB
5
W=White Powder Coat
X=None (natural aluminum)
Y=Black Powder Coat
H
WARNING: THE USE OF UNAUTHORIZED ACCESSORIES SUCH AS BANNERS, SIGNS OR PENNANTS FOR WHICH THE POLE WAS NOT DESIGNED FOR VOIDS THE COOPER LIGHTING
WARRANTY AND MAY RESULT IN POLE FAILURE CAUSING SERIOUS INJURY OR PROPERTY DAMAGE. COOPER LIGHTING'S POLE WARRANTY IS ALSO VOIDED IF
LUMINAIRE IS NOT INSTALLED AT TIME OF POLE INSTALLATION.
184 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
|