UMTS and ADSL2+ Router
Michelangelo UMTS - Code 8E4389
l Your LAN over the Internet via UMTS
l ADSL always online with UMTS Back-up function
l 54M Wi-Fi Wireless Internet surfing
l WEB based configuration
UMTS - ADSL2/2+
DESCRIPTION
Michelangelo UMTS is a router with 3G/HSDPA PC
Card slot using 3G/HSDPA, UMTS, EDGE, GPRS or
GSM standards for Internet connections.
The diffusion of 3G standard also solved the problem of
speed limit related to GSM and GPRS technologies and
allows broadband mobility and wireless connections.
At present the 3G/HSDPA standard reaches the speed
of 7,2 Mbps and 1,8 Mbps for the UMTS.
The real performance with Michelangelo UMTS will
then depend on the operator, on the UMTS coverage
and on the PC Card you use.
With Michelangelo UMTS you will perform streaming video, real-time audio, play online, e-mail and Internet
access even where a traditional Internet connection is not available.
Just insert an UMTS Pc Card in Michelangelo UMTS and you will give connectivity to all the LAN computers and
devices.
Michelangelo UMTS is equipped with an ADSL WAN interface supporting the ADSL2/2+ standard and it can surf
the Internet in downstream up to 12/24 Mbps and upstream up to 1 Mbps. Anyway, the ADSL connection can be
always established in downstream up to 8 Mbps.
Connecting Michelangelo UMTS to the ADSL line you can manage the UMTS connection as a Back-up that
guarantees the service. In case of faulty ADSL connection, the router automatically will pass over UMTS and come
back to the starting configuration as this is restored.
Three different types of connection are available with Michelangelo UMTS: ADSL, UMTS or ADSL with Back-up
over UMTS.
Wireless surfing thanks to the 54/11 Mbps built-in Wireless Access Point (802.11g/802.11b).
As for the security of radio transmissions the WPA-PSK/WPA2-PSK and 4/128 bit WEP encryptions are supported.
Michelangelo UMTS 14/07/2008
For further information visit our
website
|