Earthquake warrants the original purchaser that all Factory Sealed New Audio Products be free from
defects in material and workmanship, under normal and proper use, for a period of ninety (90) days from
the date of purchase (as shown on the original sales receipt with serial number affixed/written on it). The
ninety (90) day warranty period is valid only if an authorized Earthquake dealer properly installs the
product, and the warranty registration card is properly filled out and sent to Earthquake Sound
Corporation. Ifa non-authorized party installs the product, no warranty will be rewarded.
Sound That Will Move You
(A)Ninety (90) day limitedwarranty guidelines:
Earthquake pays forlabor, parts, and ground freight (US mainland only) back tocustomer.
(B)Warning:
Products (sent for repair) that are tested by Earthquake technicians and deemed to have no
problem(s) will not be covered by the day limited warranty. Customer will be charged a
minimumofone(1) houroflabor(ongoingrates) plusshippingcharges back tocustomer.
HD250-X
owner’s manual
(C) Earthquake agrees to repair or replace - at our option - all such defective products/parts
subjecttothefollowingprovisions:
!
Defective products/parts have not been altered or repaired by other than an Earthquake factory
approved technician.
Products/parts are not subjected to negligence, misuse, improper use, or accident, damaged by
!
improper line voltage, used with incompatible products, or have its serial number or any part of
it altered, defaced or removed, or have been used in any way that is contrary to Earthquake's
written instructions.
(D)Warranty Limitations:
Earthquake warranty does not cover products that have been modified or abused, including but not
limited tothe following:
!
Damages to driver enclosure or part finish due to misuse, abuse, or use of improper use of
cleaning materials/methods.
Bent driver frame, broken speaker connectors, holes in grille or burnt speaker voice coil.
Fading, deterioration ofspeaker components &finish due toimproper exposure toelements.
!
!
!
Subsequent damage toand fromother products.
A warranty claim will not be valid if the warranty registration card is not properly filled & returned to
Earthquake with a copy ofthe sales invoice.
(E) Service Request:
To receive product(s) service, contact Earthquake Sound’s service department at (510) 732-1000
and request an RMA number (Return Material Authorization) as item(s) shipped without a valid
RMAnumber will be refused. Make sure you provide us with your complete and correct shipping
address, a valid phone number, and a brief description of the problem you are experiencing with
the product. In most cases, our technicians might be able to resolve the problem over the phone,
thus eliminating the need toship the product.
(F) Shipping Instructions:
Product(s) must be packaged in its original protective box(es) to minimize transport damage.
Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake
Sound Corporation reserves the right to refuse product that improperly packed. Original sales
receipt must accompany product returned for service. Ship product to: Earthquake Sound Corp.
2727 McConeAvenue, Hayward, CA94545.
You are responsible forthe costofshipping the product toEarthquake Sound Corporation.
Earthquake Sound Corporation
2727 McCone Avenue. Hayward, CA 94545.USA
US Toll Free: 1-800-576-7944 | Tel: 510-732-1000 | Fax: 510-732-1095
(G)DisputesResolution:
All disputes - between clients and Earthquake Sound Corporation - resulting from the ninety (90) day
limited warranty policy must be resolved according to the laws & regulations of the county of
Alameda, California.
EQ11-25
matching horn
4”
4 9/16”
3” deep
outer diameter
1 5/8”
Specifications are subject to change without notice
ATTACHING HD250-X (DRIVER) TO EQ11-25 (HORN)
1) Place the EQ11-25 Horn facing downward onto a flat, hard surface.
2) Take the HD250-X Driver and carefully twist into the Horn. Hold the Horn down firmly
with one hand while twisting the Driver in with the other hand.
3) Make sure the Driver screws evenly and at a level angle.
Consider using a protective mat as to not damage the horn
Specifications are subject to change without notice
|