Elation Professional Work Light RGBW User Manual

ELED Strip RGBW  
Introduction  
Unpacking: Thank you for purchasing the ELED Strip RGBW by Ela-  
tion Professional®. Every ELED Strip RGBW has been thoroughly tested  
and has been shipped in perfect operating condition. Carefully check  
the shipping carton for damage that may have occurred during ship-  
ping. If the carton appears to be damaged, carefully inspect your fix-  
ture for any damage and be sure all accessories necessary to operate  
the unit has arrived intact. In the case damage has been found or parts  
are missing, please contact our toll free customer support number for  
further instructions. Do not return this unit to your dealer without first  
contacting customer support.  
ELED Strip RGBW  
Introduction: The Elation Professional® ELED Strip RGBW is part of  
a continuing pursuit to create high quality intelligent lighting. The ELED  
Strip RGBW is a DMX intelligent, high powered LED color bar. This  
effect can be used in a stand alone mode or connected in a Master/  
Slave configuration. The unit can also be controlled via DMX controller.  
This wash has four operating modes: Sound Active mode, Static Color  
mode, Preset mode, RGBW mode, and DMX control mode.  
Customer Support: Elation provides a customer support line, to  
provide set up help and to answer any question should you encounter  
problems during your set up or initial operation. You may also visit us  
tions. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m.  
Pacific Standard Time.  
Voice:  
Fax:  
(323) 582-3322  
(323) 582-3108  
E-mail:  
User Instructions  
Warning! To prevent or reduce the risk of electrical shock or fire, do  
not expose this unit to rain or moisture.  
Caution! There are no user serviceable parts inside this unit. Do not  
attempt any repairs yourself, doing so will void your manufactures war-  
ranty. In the unlikely event your unit may require service please contact  
Elation.  
PLEASE recycle the shipping carton when ever possible.  
©Elation Professional®  
6122 S. Eastern Ave.  
Los Angeles CA. 90040  
Rev. 11/08  
 
ELED Strip RGBW  
Set Up  
ELED Strip RGBW  
Set Up  
Power Supply: Before plugging your unit in, be sure the source volt-  
age in your area matches the required voltage for your Elation ELED  
Strip RGBW. The Elation ELED Strip RGBW is a 100v ~ 220v unit.  
Because of voltage setup of the unit you do not have to worry about  
wall output voltage. This unit is compatiable with all wall outputs.atches  
the wall outlet voltage before attempting to operate you fixture.  
Notice: Be sure to follow figures two and three when making your own  
cables. Do not use the ground lug on the XLR connector. Do not con-  
nect the cable’s shield conductor to the ground lug or allow the shield  
conductor to come in contact with the XLR’s outer casing. Grounding  
the shield could cause a short circuit and erratic behavior.  
COMMON  
1
2
1
DMX +  
DMX -  
DMX512 OUT  
3-PIN XLR  
DMX512 IN  
3-PIN XLR  
3
3
DMX-512: DMX is short for Digital Multiplex. This is a universal pro-  
tocol used as a form of communication between intelligent fixtures  
and controllers. A DMX controller sends DMX data instructions from  
the controller to the fixture. DMX data is sent as serial data that trav-  
els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-  
minals located on all DMX fixtures (most controllers only have a DATA  
“OUT” terminal).  
2
Figure 2  
XLR Female Socket  
XLR Male Socket  
XLR Pin Configuration  
Pin 1 = Ground  
1 Ground  
2 Cold  
2 Cold  
1 Ground  
Pin 2 = Data Compliment (negative)  
3 Hot  
3 Hot  
Pin 3 = Data True (positive)  
Figure 3  
DMX Linking: DMX is a language allowing all makes and models of  
different manufactures to be linked together and operate from a single  
controller, as long as all fixtures and the controller are DMX compli-  
ant. To ensure proper DMX data transmission, when using several  
DMX fixtures try to use the shortest cable path possible. The order  
in which fixtures are connected in a DMX line does not influence the  
DMX addressing. For example; a fixture assigned a DMX address of 1  
may be placed anywhere in a DMX line, at the beginning, at the end,  
or anywhere in the middle. When a fixture is assigned a DMX address  
of 1, the DMX controller knows to send DATA assigned to address 1  
to that unit, no matter where it is located in the DMX chain.  
Special Note: Line Termination. When longer runs of cable are  
used, you may need to use a terminator on the last unit to avoid erratic  
behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con-  
nected between pins 2 and 3 of a male XLR connector (DATA + and  
DATA -). This unit is inserted in the female XLR connector of the last  
unit in your daisy chain to terminate the line. Using a cable terminator  
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic  
behavior.  
Termination reduces signal errors and  
1
avoids signal transmission problems  
3
and interference. It is always advisable  
2
to connect a DMX terminal, (Resistance  
120 Ohm 1/4 W) between PIN 2 (DMX-)  
and PIN 3 (DMX +) of the last fixture.  
Figure 4  
Data Cable (DMX Cable) Requirements (For DMX Operation):  
The ELED Strip RGBW can be controlled via DMX-512 protocol. The  
ELED Strip RGBW has 6 DMX modes, please see pages 10-12 for the  
different modes. The DMX address is set on the back panel of the ELED  
Strip RGBW. Your unit and your DMX controller require a standard 3-  
pin XLR connector for data input and data output  
5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR  
connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures  
may be implemented in a 3-pin XLR DMX line. When inserting stan-  
dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be  
used, these adaptors are readily available at most electric stores. The  
chart below details a proper cable conversion.  
(Figure 1). If you are making your own cables, be sure  
to use standard two conductor shielded cable (This  
3-Pin XLR to 5-Pin XLR Conversion  
cable may be purchased at almost all pro sound and  
lighting stores). Your cables should be made with a  
male and female XLR connector on either end of the  
cable. Also remember that DMX cable must be daisy  
Conductor  
Ground/Shield  
3-Pin XLR Female (Out)  
5-Pin XLR Male (In)  
Pin 1  
Pin 1  
Pin 2  
Pin 3  
Data Compliment (- signal)  
Data True (+ signal)  
Not Used  
Pin 2  
Pin 3  
Do Not Use  
Do Not Use  
Not Used  
Figure 1  
chained and can not be split.  
 
ELED Strip RGBW  
Operating Instructions  
ELED Strip RGBW  
Operating Instructions  
2. Set the “Master” unit to your desired mode or operation.  
3. For the “Slave” unit(s), press the MODE button until the display to  
shows “XXX7”.  
LED Display On/Off:  
To set the LED display to turn off after 10 seconds, press the MODE  
button until 0010 is displayed, press the UP button to display 0020.  
Now the display will disappear after 10s. Press any button to turn  
the display on again. Be advised though that the display will turn off  
automatically after 10 seconds.  
4. Connect the “Slave” unit or units and they will automatically start to  
follow the “Master.”  
Color Mode:  
1. Plug the fixture in and press the MODE button until “XXX8” is dis-  
played.  
To set the display press the MODE button until 0010 is displayed. The  
display will now stay on at all times.  
0010= LCD display on at all times.  
2. There are 32 colors to choose from. Select your desired color by  
pressing the UP and DOWN buttons.  
0020= LCD display shuts off after 10 seconds.  
Operating Modes:  
Preset Program Mode:  
You can use the ELED Strip RGBW in five ways:  
• DMX control mode - This function will allow you to control each  
individual fixtures traits with a standard DMX 512 controller.  
• Color mode - Select one of 32 colors to remain static  
• Preset mode - There are 32 built in programs to choose from.  
• RGBW mode - Control the intensity of all four colors adjusting the  
intensity to your desire.  
1. Plug the fixture in and press the MODE button until “XXX9” is dis-  
played.  
2. There are 20 programs to choose from. Select your desired program  
by pressing the UP and DOWN buttons. You can set your program  
speed by following the instructions below.  
Preset Program Mode Adjustment:  
1. To adjust the speed of your Preset mode program press the MODE  
button until “XXX ” is displayed. “XXX ” is the next mode after Pre-  
set Mode.  
• Sound-Active mode - The unit will react to sound, chasing through the  
built in programs.  
Master-Slave Operation:  
2. Press the UP or DOWN buttons to make the adjustmetns. Set to your  
This function will allows you to link units together to run in a Master-  
Slave mode. In Master-Slave operation one unit will act as the controlling  
unit and the others will react to the controlling units built-in programs.  
Any unit can act as a Master or as a Slave however, only one unit can be  
programmed to act as the “Master.”  
desire.  
RGBW Mode:  
1. Plug the fixture in and press the MODE button until:  
2. When XXX  
is displayed you are in Red dimming mode. Press the  
UP and DOWN buttons to adjust intensity.  
Master-Slave Connections and Settings:  
3. When XXX  
is displayed you are in Green dimming mode. Press the  
1. Daisy chain your units via the XLR connector on the rear of the unit.  
Use standard XLR microphone cables to link your units together.  
Remember that the Male XLR connector is the input and the Female  
XLR connector is the ouput. The first unit in the chain (master) will  
use the female XLR connector only. The last unit in the chain will use  
the male XLR connector only.  
UP and DOWN buttons to adjust intensity.  
3. When XXX  
is displayed you are in Blue dimming mode. Press the  
UP and DOWN buttons to adjust intensity.  
4. When XXXE is displayed you are in White dimming mode. Press the  
UP and DOWN buttons to adjust intensity.  
You can also daisy chain the power cords, this can only be  
done with 20 fixtures. After 20 you will need to use a new  
power outlet. They must be the same fixtures. DO NOT mix  
fixtures.  
Sound Active Mode:  
In this mode the ELED Strip RGBW will react to sound, and chase  
through the different programs.  
1. Plug the fixture in and press the MODE button until “XXX ” is dis-  
 
ELED Strip RGBW  
4 Channel - DMX Values & Functions  
Function  
ELED Strip RGBW  
Operating Instructions  
Channel  
Value  
played. You can press the UP and DOWN buttons to pick one of the  
20 preset programs to play in sound active mode. If you press the UP  
button until “ALL ” is displayed the fixture will now run through each  
preset program in sound active mode.  
1
RED  
0% - 100%  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
Note: When “ALL ” is displayed the fixture will rotate through all  
programs.  
2. The fixture will now change via sound.  
2
3
4
GREEN  
0% - 100%  
BLUE  
0% - 100%  
DMX Mode:  
Operating through a DMX controller gives the user the freedom to create  
their own programs tailored to their own individual needs. This function  
also allows you to use your fixtures as spot lights. The ELED Strip RGBW  
has 6 DMX modes: 4 Channel mode, 7 Channel mode, 8 Channel mode,  
11 Channel mode, 16 Channel mode, and a 19 Channel mode. See  
pages 10-16 for each modes’ DMX traits.  
WHITE  
0% - 100%  
ELED Strip RGBW  
7 Channel - DMX Values & Functions  
Function  
Channel  
Value  
1. This function will allow you to control each individual fixture’s traits  
with a standard DMX 512 controller such as the Elation® Show  
Designer™ or the Elation® DMX Operator™.  
2. To run your fixture in DMX mode, plug in the fixture via the XLR con-  
nections to any standard DMX controller. Select your desired DMX  
mode, and then press the UP or DOWN buttons to adjust the DMX  
address.  
3. To run the 4 Channel Mode, press the MODE button until “XXX1”  
is displayed. This is the DMX addressing for the 4 Channel Mode.  
4. To run the 7 Channel Mode, press the MODE button until “XXX2”  
is displayed. This is the DMX addressing for the 7 Channel Mode.  
5. To run the 8 Channel Mode, press the MODE button until “XXX3”  
is displayed. This is the DMX addressing for the 8 Channel Mode.  
6. To run the 11 Channel Mode, press the MODE button until “XXX4”  
is displayed. This is the DMX addressing for the 11 Channel  
Mode.  
1
RED  
0% - 100%  
GREEN  
0% - 100%  
BLUE  
0% - 100%  
WHITE  
0% - 100%  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
2
3
4
5
COLOR MACROS  
OFF  
0
1 - 7  
8 - 15  
BASTARD AMBER  
MEDIUM AMBER  
PALE AMBER GOLD  
GALLO GOLD  
GOLDEN AMBER  
LIGHT RED  
MEDIUM RED  
MEDIUM PINK  
BROADWAY PINK  
FOLLIES PINK  
LIGHT LAVENDER  
16 - 23  
24 - 31  
32 - 39  
40 - 47  
48 - 55  
56 - 63  
64 - 71  
72 - 79  
80 - 87  
7. To run the 16 Channel Mode, press the MODE button until “XXX5”  
is displayed. This is the DMX addressing for the 16 Channel  
Mode.  
8. To run the 19 Channel Mode, press the MODE button until “XXX6”  
is displayed. This is the DMX addressing for the 19 Channel  
Mode.  
9. Please see pages 10-16 for DMX values and traits  
 
ELED Strip RGBW  
7 Channel - DMX Values & Functions  
Function  
ELED Strip RGBW  
7 Channel - DMX Values & Functions  
Function  
Channel  
Value  
Channel  
Value  
5
COLOR MACROS CONT.  
SPECIAL LAVENDER  
LAVENDER  
6
PROGRAMS CONT.  
PROGRAM 12  
88 - 95  
96 - 103  
132 - 143  
144 - 155  
156 - 167  
168 - 179  
180 - 191  
192 - 203  
204 - 215  
216 - 227  
228 - 239  
240 - 255  
1 - 255  
PROGRAM 13  
PROGRAM 14  
PROGRAM 15  
PROGRAM 16  
PROGRAM 17  
PROGRAM 18  
PROGRAM 19  
PROGRAM 20  
104 - 111  
112 - 119  
120 - 127  
128 - 135  
136 - 143  
144 - 151  
152 - 159  
160 - 167  
168 - 175  
176 - 183  
184 - 191  
192 - 199  
200 - 207  
208 - 215  
216 - 223  
224 - 231  
232 - 239  
240 - 247  
248 - 255  
INDIGO  
HEMSLEY BLUE  
TIPTON BLUE  
LIGHT STEEL BLUE  
LIGHT SKY BLUE  
SKY BLUE  
BRILLIANT BLUE  
LIGHT GREEN BLUE  
BRIGHT BLUE  
PRIMARY BLUE  
CONGO BLUE  
PALE YELLOW GREEN  
MOSS GREEN  
PRIMARY GREEN  
DOUBLE CTB  
FULL CTB  
SOUND ACTIVE  
MAIN DIMMER 0% - 100%  
7
ELED Strip RGBW  
8 Channel - DMX Values & Functions  
Function  
Channel  
Value  
1
RED (RIGHT HALF SIDE)  
0% - 100%  
GREEN (RIGHT HALF SIDE)  
0% - 100%  
BLUE (RIGHT HALF SIDE)  
0% - 100%  
WHITE (RIGHT HALF SIDE)  
0% - 100%  
RED (LEFT HALF SIDE)  
0% - 100%  
GREEN (LEFT HALF SIDE)  
0% - 100%  
BLUE (LEFT HALF SIDE)  
0% - 100%  
WHITE (LEFT HALF SIDE)  
0% - 100%  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
2
3
4
5
6
7
8
HALF CTB  
DARK BLUE  
WHITE  
PROGRAMS  
PROGRAM 1  
PROGRAM 2  
PROGRAM 3  
PROGRAM 4  
PROGRAM 5  
PROGRAM 6  
PROGRAM 7  
PROGRAM 8  
PROGRAM 9  
PROGRAM 10  
PROGRAM 11  
6
1 - 11  
12 - 23  
24 - 35  
36 - 47  
48 - 59  
60 - 71  
72 - 83  
84 - 95  
96 - 107  
108 - 119  
120 - 131  
 
ELED Strip RGBW  
11 Channel - DMX Values & Functions  
Function  
ELED Strip RGBW  
16 Channel - DMX Values & Functions  
Function  
Channel  
Value  
Channel  
Value  
1
RED (SECTION ONE)  
0% - 100%  
GREEN (SECTION ONE)  
0% - 100%  
BLUE (SECTION ONE)  
0% - 100%  
WHITE (SECTION ONE)  
0% - 100%  
RED (SECTION TWO)  
0% - 100%  
GREEN (SECTION TWO)  
0% - 100%  
BLUE (SECTION TWO)  
0% - 100%  
WHITE (SECTION TWO)  
0% - 100%  
RED (SECTION THREE)  
0% - 100%  
GREEN (SECTION THREE)  
0% - 100%  
BLUE (SECTION THREE)  
0% - 100%  
WHITE (SECTION THREE)  
0% - 100%  
RED (SECTION FOUR)  
0% - 100%  
GREEN (SECTION FOUR)  
0% - 100%  
BLUE (SECTION FOUR)  
0% - 100%  
WHITE (SECTION FOUR)  
0% - 100%  
1
RED (RIGHT HALF SIDE)  
0% - 100%  
GREEN (RIGHT HALF SIDE)  
0% - 100%  
BLUE (RIGHT HALF SIDE)  
0% - 100%  
WHITE (RIGHT HALF SIDE)  
0% - 100%  
RED (LEFT HALF SIDE)  
0% - 100%  
GREEN (LEFT HALF SIDE)  
0% - 100%  
BLUE (LEFT HALF SIDE)  
0% - 100%  
WHITE (LEFT HALF SIDE)  
0% - 100%  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
2
3
2
3
4
5
6
7
8
9
4
5
6
7
8
9
PLEASE SEE DMX TRAITS AND  
VALUES OF CHANNEL 5 OF  
7 CHANNEL MODE  
PLEASE SEE DMX TRAITS AND  
VALUES OF CHANNEL 6 OF  
7 CHANNEL MODE  
MAIN DIMMER 0% - 100%  
10  
11  
12  
13  
14  
15  
16  
10  
11  
1 - 255  
Please see page 16 for a diagram of the fixture and section  
setup.  
 
ELED Strip RGBW  
19 Channel - DMX Values & Functions  
Function  
ELED Strip RGBW  
19 Channel - DMX Values & Functions  
Function  
Channel  
Value  
Channel  
Value  
1
RED (SECTION ONE)  
0% - 100%  
GREEN (SECTION ONE)  
0% - 100%  
BLUE (SECTION ONE)  
0% - 100%  
WHITE (SECTION ONE)  
0% - 100%  
RED (SECTION TWO)  
0% - 100%  
GREEN (SECTION TWO)  
0% - 100%  
BLUE (SECTION TWO)  
0% - 100%  
WHITE (SECTION TWO)  
0% - 100%  
RED (SECTION THREE)  
0% - 100%  
GREEN (SECTION THREE)  
0% - 100%  
BLUE (SECTION THREE)  
0% - 100%  
WHITE (SECTION THREE)  
0% - 100%  
RED (SECTION FOUR)  
0% - 100%  
GREEN (SECTION FOUR)  
0% - 100%  
BLUE (SECTION FOUR)  
0% - 100%  
WHITE (SECTION FOUR)  
0% - 100%  
17  
PLEASE SEE DMX TRAITS AND  
VALUES OF CHANNEL 5 OF  
7 CHANNEL MODE  
PLEASE SEE DMX TRAITS AND  
VALUES OF CHANNEL 6 OF  
7 CHANNEL MODE  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
1 - 255  
2
3
18  
19  
4
1 - 255  
MAIN DIMMER 0% - 100%  
Please see below for a diagram of the fixture and section setup.  
5
6
ELED Strip RGBW  
Section 4 Section 3  
Diagram  
Section 1  
Section 2  
7
8
9
Note: The power cord is located behind Section 4.  
ELED Strip RGBW  
Photometrics  
10  
11  
12  
13  
14  
15  
16  
1027  
430  
LUX  
220  
RED  
1360  
590  
LUX  
300  
GREEN  
4
3
4
3
2
2
1
0
1
2
3
4
1
0
1
40 DEGREE  
40 DEGREE  
2
3
4
1
2
3
Distance (meter)  
1
2
3
Distance (meter)  
L*W (meter)  
2.6*0.68  
2.3*0.52  
1.9*0.3  
L*W (meter)  
2.6*0.68  
2.3*0.52  
1.9*0.3  
121  
50  
LUX  
30  
BLUE  
3440  
1460  
760 LUX  
WHITE  
4
3
4
3
2
2
1
0
1
2
3
4
1
0
1
40 DEGREE  
40 DEGREE  
2
3
4
1
2
3
Distance (meter)  
L*W (meter)  
2.6*0.68  
1
1.9*0.3  
2
3
Distance (meter)  
2.3*0.52  
1.9*0.3  
L*W (meter)  
2.3*0.52  
2.6*0.68  
 
ELED Strip RGBW  
Fuse Replacement  
ELED Strip RGBW  
Warranty  
2-YEAR LIMITED WARRANTY  
Locate and remove the unit’s power cord. Once the cord has been  
removed located the fuse holder located inside the power socket.  
Insert a flat-head screw driver into the power socket and gently pry out  
the fuse holder. Remove the bad fuse and replace with a new one. The  
fuse holder also has a holder for a spare fuse.  
A. Elation Professionals® hereby warrants, to the original purchaser, Elation Profes-  
sionals® products to be free of manufacturing defects in material and workmanship  
for a period of two years (730 days) from the date of purchase. This warranty shall be  
valid only if the product is purchased within the United States of America, including  
possessions and territories. It is the owner’s responsibility to establish the date and  
place of purchase by acceptable evidence, at the time service is sought.  
ELED Strip RGBW  
Trouble Shooting  
B. For warranty service, send the product only to the Elation Professionals® factory.  
All shipping charges must be pre-paid. If the requested repairs or service (including  
parts replacement) are within the terms of this warranty, Elation Professionals® will  
pay return shipping charges only to a designated point within the United States. If the  
entire instrument is sent, it must be shipped in its original package. No accessories  
should be shipped with the product. If any accessories are shipped with the product,  
Elation Professionals® shall have no liability whatsoever for loss of or damage to any  
such accessories, nor for the safe return thereof.  
Listed below are a few common problems the user may encounter,  
with solutions.  
Unit not responding to DMX:  
1. Check that the DMX cables are connected properly and are  
wired correctly (pin 3 is “hot”; on some other DMX devices  
pin 2 may be ‘hot’). Also, check that all cables are connected  
to the right connectors; it does matter which way the inputs  
and outputs are connected.  
C. This warranty is void if the serial number has been altered or removed; if the prod-  
uct is modified in any manner which Elation Professionals® concludes, after inspec-  
tion, affects the reliability of the product; if the product has been repaired or serviced  
by anyone other than the Elation Professionals® factory unless prior written authori-  
zation was issued to purchaser by Elation Professionals®; if the product is damaged  
because not properly maintained as set forth in the instruction manual.  
Unit does not respond to sound:  
1. Quiet or high pitched sounds will not activate the unit.  
2. Make sure that you are in Sound Active mode.  
D. This is not a service contract, and this warranty does not include maintenance,  
cleaning or periodic check-up. During the period specified above, Elation Profession-  
als® will replace defective parts at its expense, and will absorb all expenses for war-  
ranty service and repair labor by reason of defects in material or workmanship. The  
sole responsibility of Elation Professionals® under this warranty shall be limited to the  
repair of the product, or replacement thereof, including parts, at the sole discretion of  
Elation Professionals®. All products covered by this warranty were manufactured after  
January 1, 1990, and bear identifying marks to that effect.  
ELED Strip RGBW  
Cleaning  
Due to fog residue, smoke, and dust cleaning the internal and exter-  
nal optical lenses must be carried out periodically to optimize light  
output.  
E. Elation Professionals® reserves the right to make changes in design and/or  
improvements upon its products without any obligation to include these changes in  
any products theretofore manufactured.  
1. Use normal glass cleaner and a soft cloth to wipe down the  
outside casing.  
2. Clean the external optics with glass cleaner and a soft cloth  
every 20 days.  
3. Always be sure to dry all parts completely before plugging  
the unit back in.  
Cleaning frequency depends on the environment in which the fixture  
operates (i.e. smoke, fog residue, dust, dew).  
F. No warranty, whether expressed or implied, is given or made with respect to any  
accessory supplied with products described above. Except to the extent prohibited  
by applicable law, all implied warranties made by Elation Professionals® in connec-  
tion with this product, including warranties of merchantability or fitness, are limited in  
duration to the warranty period set forth above. And no warranties, whether expressed  
or implied, including warranties of merchantability or fitness, shall apply to this prod-  
uct after said period has expired. The consumer’s and or Dealer’s sole remedy shall  
be such repair or replacement as is expressly provided above; and under no circum-  
stances shall Elation Professionals® be liable for any loss or damage, direct or conse-  
quential, arising out of the use of, or inability to use, this product.  
G. This warranty is the only written warranty applicable to Elation Professionals®  
Products and supersedes all prior warranties and written descriptions of warranty  
terms and conditions heretofore published.  
 
ELED Strip RGBW  
Specifications  
ELED Strip RGBW™  
Model:  
SPECIFICATIONS:  
Working Position:  
Voltage:  
Power Consumption:  
Fuse:  
Any safe working position  
100V ~ 240V/47~63Hz  
75W  
3.15 Amp  
Weight:  
10.5 lbs./ 4.74Kgs.  
Dimensions:  
42.25” (L) x 7.5” (W) x 6.5” (H)  
1070 x 185 x 160mm  
Colors:  
LEDs:  
RGB + W Color Mixing  
64 LED’s ~ 64W LED’s (16 Red,  
16 Blue, 16 Green, & 16 White)  
6 DMX Modes: 4 Channel Mode,  
7 Channel Mode, 8 Channel  
Mode, 11 Channel Mode, 16 Chan-  
nel Mode, & 19 Channel Mode  
2 Year (730 days)  
DMX Channels:  
Warranty:  
Please Note: Specifications and improvements in the design of  
this unit and this manual are subject to change without any prior  
written notice.  
©Elation Professionals®  
A Division of the AmericanDJ® Group of Companies  
World Headquarters:  
6122 S. Eastern Ave. Los Angeles, CA 90040 USA  
Tel: 323-582-3322 Fax: 323-582-3311  
 

Coleman Water Heater 413H User Manual
Concord Camera Camcorder DV2020 User Manual
Costar Carbon Monoxide Alarm 9RV User Manual
Craftsman Pressure Washer 5807524 User Manual
Craftsman Trimmer 82147 User Manual
Dacor Ice Maker EF36IWF User Manual
Delta Electronics Network Card SPBD 1250A4Q1R User Manual
Elation Professional Landscape Lighting ELAR 180 PRO RGBAW User Manual
GBC Paper Shredder 7500S User Manual
Genesis Advanced Technologies Cordless Saw GJS450 User Manual