EZ600/W
EZ600/B
CAUTIONS
CAUTIONS
FEATURES
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions;
• 1/3" Sony Super-HAD CCDⅡ
Minimum illumination 0.00002 Lux
( F1.2, 30 IRE, Sense-up X256, AGC high ) S/N Ratio 50dB
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
HIGH PERFORMANCE
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
BULLET CAMERA
OPERATION MANUAL
(Applicable in the European Union and other European
countries with separate collection systems)
• High Resolution 600TV Lines
This camera displays a high resolution of 600 TV Lines using
sophisticated full digital image processing, 10 bit A/D serial signal
processing and special algorithm technologies.
Note -
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.”
This marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
• 3D DNR (3D Digital Noise Reduction)
The DNR technology greatly reduces noise thus delivering a crisp
and clear image.
This camera’s DNR function utilizes an adaptive 3D Filter to reduce
noise caused by movement and the evironment.
This product should not be mixed with other commercial wastes
purchased this product, or their local government office, for details
of where and how they can take item for environmentally safe
recycling.
WARNING -
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
• DAY&NIGHT
The Day & Night operation feature an ‘auto’ mode which switches
between color and B&W modes automatically based on the level
of illumination in the scene. The COLOR mode operates during
bright conditions to provide optimum colors while the B&W Mode
operates during dark conditions to enhance the definition of the
image. Or, the camera may be set to return a color image at all
light levels.
Business users should contact their supplier and check the terms
and conditions of the purchase contract.
Household users should contact either the retailer where they for
disposal.
Caution -
Do not make any changes to the houseing or internal parts. This could void
the FCC certification and may void the warranty.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
1. IF DC power is used regulated DC12V 500mA power supply is
recommended for use with this camera for the best picture and the most
stable operation.
An unregulated power supply may cause damage to the camera.
If an unregulated power supply is used, product warranty may be void.
2. It is recommended that the camera is used with a monitor that has
a CCTV quality 75Ω video impedance level. If your monitor or other
equipment is switched to high impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal
components. Refer servicing to the manufacturer
• Privacy Mask Function
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER(OR BACK). SERVICING MUST
BE DONE BY QUALIFIED SERVICE PERSONNEL.
The Privacy masking feature allows for the ‘blanking’ of specific
areas in a scene where viewing or recording is prohibited or not
desired.
This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient mangnitude to constitute
a risk of electric shock to persons.
• OSD (On Screen Display)
This camera is easily configured with its OSD (On Screen Display),
menu. The menu can be displayed in multiple languages.
Before attempting to connect or operate, please read and
follow these instructions.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
4. Never face the camera towards the sun or any bright or reflective light,
which may cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial number sticker.
COMPONENTS
MOUNTING POSITION
CONNECTION
DIMENSIONS
Unit: mm(inch)
Ф36(Ф1.41)
133(5.23)
Bullet
Camera
DC12V POWER SUPPLY /
AC24V POWER SUPPLY
DC12V/AC24V
(RED)
Camera with sunshield
33.5(1.32)
124(4.88)
Mounting
Bracket
VIDEO IN
BNC FEMALE
Ф29(Ф1.14)
51.2(2.02)
1/4"-20 UNC
Depth 4.5(0.18)
TV MONITOR
OR DVR
360˚
360˚
Mounting
Screw 3ea
Focus Ring
(NEARꢀFAR)
Zoom Ring
(WideꢀTele)
Camera body only
Joystick for OSD
41.5(1.63)
3-Ф4.5(0.11-Ф0.18)
Power
Pigtail Cable
90˚
Operation
Manual
Mounting base pattern
When you install the camera, please seal the ends of
Ф
Ф
60( 2.36)
cables to protect the camera coneections from humidity
problems.
Mount
|