LED
State
Green
Description
QuickStart Guide
The correct cable is connected to the copper
10/100/1000 interface and the connected equip-
ment has power.
Ports 1 to 4 Left LED
FortiDB-1000B
Flashing
Green
Network activity at this interface.
Ports 1 to 4 Right LED
The interface is connected at 1000 Mbps.
The interface is connected at 100 Mbps.
Yellow
R
Visit these links for more information and documentation for your Fortinet product.
© Copyright 2008 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
30 September 2008
15-31000-78779-20080930
Package Contents
Connector
Type
Speed
Protocol
Description
Copper gigabit connection to 10/100/1000 copper networks.
Ports 1 to 4
RJ-45
10/100/1000
Base-T
Ethernet
CONSOLE
DB-9
USB
9600 8/N/1
RS-232 serial Optional connection to the management computer. Provides access to
the command line interface (CLI).
USB
USB
Optional connection to a USB key for firmware backup and installation.
R
Ethernet ports
Power supply
Ethernet
ports
For future
use
Console
USB
connection
QuickStart Guide
2 Mounting Slide Rails
R
Copyright 2008 Fortinet Incor
Trademarks
Products mentioned in this do
Welcome
|
Bienvenue
|
Willkommen | ?迎
| 歓
迎
|
Bienvenido
|
Benvenuto
Power Cable
Straight-through
Ethernet cable
Null-Modem Cable
(RS-232)
Connecting
Connect the following to the FortiDB unit. Ensure the FortiDB unit is placed on a stable surface or install in a standard 19 inch rack.
See the FortiDB-1000B Rack Installation Guide for details.
•
•
•
Insert one end of a an Ethernet cable into port 1.
Connect the other end of the Ethernet cable to the network hub or switch.
Connect the AC Power cable to the Power Supply on the back of the
FortiDB unit.
Ethernet cables connect to
the internal network and to
the Internet (public switch
or router)
•
Connect the other end of the Power cable to a surge protected
power bar or power supply.
Null modem
Ethernet cables connect to
the internal network and to
the Internet (public switch
or router)
Power cable
connects to
power supply
cable connects to serial
port on management
computer
Configuration Tools
Command Line Interface (CLI)
Web-based manager
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD included with the
FortiDB unit.
The FortiDB web-based manager is an easy-to-use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and configure reports.
Requirements:
Requirements:
•
•
An Ethernet connection between the FortiDB unit and management computer.
A web browser such as FireFox or Internet Explorer on the management computer.
•
The DB9 serial connection between the FortiDB unit and management
computer.
•
A terminal-emulation application such as HyperTerminal for Windows, on the manage-
ment computer.
|