AB-34 / AB-64 Array Bracket System
Assembly and Installation Instructions
360° Array Bracket Kit
AB-34 and AB-64 series kits feature a 4 sided powder
coated steel mounting assembly that allows the mounting
of 4 EVID speakers into a 360° pattern array configura-
tion. The AB-34 works with the EVID 3.2 series and can
be used with a threaded rod for suspension from the ceil-
ing. The AB-64 is used with the EVID 4.2 or 6.2 series
speakers and can be hung from the ceiling using a threaded
rod or used with a speaker stand tripod as shown. The
EVID’s can then be adjusted using the StrongArm Mount™
to cover a variety of patterns to best serve the installation
requirements. All assembly hardware is included.
Evid 6.2/4.2 360° Array Bracket Kit Includes
Evid 3.2 360° Array Bracket Kit Includes
Item
Qty.
2
Description
Array Bracket, Evid 6.2/4.2
360° Array Adapter, Evid 6.2/4.2
Screw, 1/4"-20 x .5"
Item
Qty.
2
Description
Array Bracket, Evid 3.2
1
2
3
4
5
6
7
8
1
2
3
4
5
1
360° Array Adapter, Evid 3.2
Screw, 1/4"-20 x .5"
1
20
20
20
20
24
24
4
Flat Washer, (1/4" inside Dia.)
Lock Nut, 1/4"-20
Flat Washer, (1/4" inside Dia.)
Lock Nut, 1/4"-20
Flat Head Screw, 1/4"-20 x .5"
Threaded Rod Adapter, Evid 6.2/4.2
Pole Mount
1
1
Ceiling Suspension (All Sizes)
Step 1: Assemble Array Brackets
Assemble the 2 Array Brackets (Item 1) using 4 Screws (Item 3), 4 Flat Washers (Item 4), and 4 Lock Nuts (Item 5) as
shown in Figure 1.
(Item 3)
Screws
(Item 5)
Lock Nuts
(Item 1)
Array Brackets
(Item 4)
Flat Washers
Figure 1
Tripod Mounting (6.2/4.2 only)
Step 1: Assemble Array Brackets
(See Page 1.)
Step 2: Assemble SAM’s to Array Bracket
(See Page 2.)
Step 3: Assemble Pole Mount to 360
Array Adapter
(Item 5)
Lock Nuts
Mount Pole Mount (Item 8) to the 360° Array
Adapter (Item 7) using 4 Flat Head Screws (Item
6), 4 Flat Washers (Item 4) and 4 Lock Nuts
(Item 4)
Flat
Washers
(Item 5) as shown in Figure 4.
(Item 7)
360 Array Adapter
(Item 8)
Pole Mount
(Item 6)
Flat Screws
Figure 4
Pole Mount Assembly
3/8 Threaded Rod
Threaded Rod Suspension
Pole Mount
Suspension Safety Warning
This guide provides instruction on how to use EVID components to create example arrays. Correct use of this
hardware is required for secure array construction. Only persons with the knowledge of proper hardware and safe
suspension techniques should attempt to suspend any sound systems overhead. CAUTION! The weakest
component determines the size and safety of the entire array. Before suspending any array always inspect all
components of the array including building structural supports for cracks, deformations, corrosion or damage that
could reduce strength and safety of the array.
It is the responsibility of the user to ensure that any Electro-Voice loudspeaker system is suspended overhead in
accordance with all current federal, state, and local regulations.
© Telex Communications, Inc. 11/2001
Part Number 38110-062 Rev A
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
|