EV9324-01
Insurice Single-i2000² System
Delivers premium quality water for ice applications
B E N E F I T S
Reduces water-related ice machine problems
caused by scale build-up from dirt and dissolved
minerals
Insurice Single-i2000² System: EV9324-01
i2000² Replacement Cartridge: EV9612-22
New and improved Micro-Pure II media inhibits
the growth of bacteria
Reduces chlorine taste and odor and other
offensive contaminants
Self-contained scale inhibitor feed keeps ice
machines functioning at full capacity
Reduces maintenance and service costs by
reducing scale and clogging of distribution lines,
evaporator plate and pump
Precoat submicron technology reduces dirt and
particles as small as 1/2 micron in size and
reduces possible health contaminants such as cysts
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
NSF Certified under NSF/ANSI Standards 42
and 53
A P P L I C A T I O N / S I Z I N G
I N S T A L L A T I O N T I P S
O P E R A T I O N T I P S
Choose a mounting location suitable to support
the full weight of the system when operating
Change cartridges on a regular 6 month
preventative maintenance program
For ice machine applications
Most cubers up to 750 lbs./day
Most flakers up to 1,500 lbs./day
Rated Capacity: 9,000 gallons
Never use saddle valve for connection
Use 3/8” water line
Change cartridges when capacity is reached or
when pressure falls below 10 psi
Service flow rate must not exceed 1.67 gpm
Do not connect system to water-cooled
condenser
Always flush the filter cartridge at time of
installation and cartridge change
Install vertically with cartridges hanging down
and allow 2-1/2” clearance below the cartridge
for easy cartridge replacement
Flush cartridges by running water through system
for five minutes at full flow
|