RFF 052 and RFF 054 False Plates
for 1-inch Products Installation Guide
The Extron® False Plates for 1-inch Products increase the face height of 1-inch tall,
quarter rack width (RFF 054) or half rack width (RFF 052) products to full single rack unit
height (1U), aiding airflow management and aesthetics. Install plates as follows:
1. Clean the 1-inch tall Extron device to be rack mounted of any dust or debris.
2. Remove the protective film from the adhesive tape on the RFF 052 or RFF 054.
3. Align the plate on the top of the device so that the adhesive faces the device and the
raised side runs flush with the front panel of the device.
4. Firmly press the plate onto the device.
5. Install the 1-inch tall device to the rack shelf.
2
3
4
5
Extron USA - West -
Headquarters
Extron Europe
Extron Asia
Extron Japan
Extron China
Extron Middle East
Extron USA - East
+800.3987.6673
Inside Europe Only
+800.7339.8766
Inside Asia Only
+400.883.1568
Inside China Only
+800.633.9876
Inside USA/Canada Only
+800.633.9876
Inside USA/Canada Only
+31.33.453.4040
+65.6383.4400
+81.3.3511.7655
+86.21.3760.1568
+971.4.2991800
+1.919.863.1794
+1.919.863.1797 FAX
+31.33.453.4050 FAX +65.6383.4664 FAX +81.3.3511.7656 FAX +86.21.3760.1566 FAX +971.4.2991880 FAX
+1.714.491.1500
68-2160-01
Rev. A
+1.714.491.1517 FAX
07 11
|