Specifications — System 5cr Plus Switcher
Video
Gain ............................................... Unity
Bandwidth .................................... 250 MHz (-3dB)
Frequency response..................... < 0.1dB @ 30 MHz
Differential phase error .............. 0.01º, 0 to 10 MHz
Differential gain error ................. 0.01%%, 0 to 10 MHz
Crosstalk ....................................... -50dB @ 5 MHz
Video input
Number/signal type ................... 2 RGBHV/RGBS/RGsB computer video
1 RGBHV/RGBS/RGsB computer video or S-video or composite video
2 S-video or composite video
Connectors .................................... 1 15-pin HD female (RGB computer video)
2 x 5 BNC female (RGB computer video; RGB/S-video/composite video)
2 x 2 BNC female (S-video or composite video)
Minimum/maximum levels ...... Analog ....... 0.3Vto 2V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 150 kHz
Vertical frequency ....................... 30 Hz to 150 Hz
Return loss .................................... -45dB @ 5 MHz
Maximum DC offset .................... 1.5V
Video output
Number/signal type ................... 1 RGBHV/RGBS/RGsB, or
1 S-video, or
1 composite video
Connectors .................................... 1 x 5 BNC female (RGB computer video)
1 x 2 BNC female (S-video
1 x 1 BNC female (composite video)
Minimum/maximum levels ...... 0.3V to 2.0V p-p
Impedance .................................... 75 ohms
Return loss .................................... -38dB @ 5 MHz
DC offset ....................................... 5mV maximumwith input at 0 offset
Switching type ............................. Triple-Action
Sync
Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB
Standards ...................................... TTL (RGB), NTSC and PAL (S-video and composite video)
Input level ..................................... 0.5V to 5V p-p
Output level.................................. 0.5V to 5V p-p
Input impedance.......................... 75 ohms
Output impedance ...................... 75 ohms
Max input voltage ....................... 5V p-p
Max. propagation delay.............. 20 nS
Polarity .......................................... Positive or negative (follows input)
Audio
Gain ............................................... Unbalanced/balanced -78dB to +40dB
Frequency response..................... 20 Hz to 20 kHz, 0.05dB
THD + Noise ................................ <0.1% @ 1 kHz at rated maximum output drive
S/N ................................................ >95dB, at rated maximum ourput drive
Crosstalk ....................................... <-80dB @ 1 kHz, fully loaded
Stereo channel separation .......... >90dB @ 1 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
1-2
System 5cr Plus • Specifications
Specifications — System 5cr Plus (continued)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Certifications ................................ CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.
(7.32-111501-D1)
1-4
System 5cr Plus • Specifications
|