POWERSHRED
®
OPERATING INSTRUCTIONS
NOTICE D'UTILISATION
MANUAL DEL PROPIETARIO
BETRIEBSANLEITUNG
POWERSHRED
4
80
ON
480
480 CC
480 HS
1.402.999.101 – Edition 02/02
480
480 CC
480 HS
Paper shredder
Contents
Page
1.
2.
3.
4.
5.
6.
7.
8.
9.
Important Safety Instructions .................................................................................. 4
Parts Identification .................................................................................................. 4
Technical Specifications ......................................................................................... 5
Supplies .................................................................................................................. 6
Installation .............................................................................................................. 6
Caution ................................................................................................................... 6
Operation ................................................................................................................ 6
Checklist for Inoperative Machine .......................................................................... 7
Malfunctions ........................................................................................................... 7
10. Maintenance ........................................................................................................... 7
11. Warranty ................................................................................................................. 8
12. Customer Service ................................................................................................... 8
Edition 02/02
3
USA
480
480 CC
480 HS
Paper shredder
2. Parts Identification
1. Important Safety Instructions
1. Read all instructions before use.
2. Save these instructions for later use.
3. Follow all warnings and instructions marked on
the product.
4. Unplug this product from the wall outlet before
cleaning. Clean with a damp cloth using a mild
soap and water solution. (Do not use abrasives
or petroleum based cleaners.)
5. Place this product as close as possible to
power source for quick and easy unplugging.
6. Do not use this product near water.
7. This product should never be placed near or
over a radiator or heat source.
1
9
2
3
4
POWERSHRED
4
80
8
7
Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143 USA
R
Model:
Serial #:
Voltage:
Current:
Motor:
Manufactured:
N
5
6
8. Operate from the type power source indicated
on the marking label. If you are not sure of the
type of power available, consult your dealer or
local electricity board.
9. Do not allow anything to rest on the power cord.
Do not place this product where people may
walk on the cord.
10. If an extension cord is used with this product,
make sure that the total of the ampere ratings
on the products plugged into the extension cord
do not exceed the extension cord ampere
rating. Also, make sure that the total of all
products plugged into the wall outlet does not
exceed 15 amps.
11. Do not attempt to service this product yourself,
as opening or removing covers may expose
you to dangerous live parts or other risks.
12. Unplug this product and refer servicing to
qualified personnel under the following
conditions:
480
480 CC
480 HS
1. Rocker switch
2. LED display
3. Cover
4. Serial label
5. Caution label
6. Cabinet
7. Cabinet access door
8. Paper feed opening
9. Paper guide roller
A) When the power cord or plug is damaged or
frayed.
B) If liquid has been spilled on the product.
C) If the product has been exposed to rain.
D) If the product does not operate normally when
the operating instructions are followed.
E) If the product has been dropped or the casing
has been damaged.
13. Keep out of the reach of children.
14. This shredder should be operated only with an
operator in attendance.
4
Edition 02/02
USA
480
480 CC
480 HS
Paper shredder
3. Technical Specifications
Model
480
Model
480 CC
Model
480 HS
Cutting Style
Strip Cut
High Security
Cross Cut
Cross Cut
Shred Size
5/32"
(3.9mm)
1/4"
(5.8mm)
5/32" x 1 1/2"
(3.9 x 40mm)
1/16" x 5/8"
(1.9 x 15mm)
1/32" x 7/16"
(0.78 x 11mm)
Security rating (DIN 32757)
2
2
3
4
5
*Sheet capacity 8 1/2" x 11" - 20 lb.
(A4, 70g/m2 -16 lb.)
20
25
16
10
7
(28)
(34)
(22)
(15)
(9)
Speed - 115 volt 60Hz units
- 220/240 volt 50Hz units
24,8 FPM
26,6 FPM
26,6 FPM
26,6 FPM
(126 mm/sec)
(135 mm/sec)
(135 mm/sec)
(135 mm/sec)
Entry width
16"
(400 mm)
Motor power
4/3 H.P.
(1150 W)
Input voltage (Depending on country)
100V 50/60Hz
115V 60Hz
220/240V 50Hz
Dimensions
23 1/2" x 18 1/2" x 36"
(595 x 470 x 918 mm)
Weight
114 lbs (52 kg)
123 lbs (56 kg)
123 lbs (56 kg)
132 lbs (60 kg)
Waste container volume
41.2 gallons (156 liters)
Noise level
- In Idle 56 dB
- Under load 62dB strip cuts and 70dB cross cuts
Edition 02/02
5
USA
480
480 CC
480 HS
Paper shredder
4. Supplies
7. Operation
–
Bags for cut material
(Packed in dispenser carton, 50 or 100 bags
Read operating instructions before
putting shredder into operation
to a roll depending on size. Contact Fellowes
or your local Fellowes dealer for the stock
number of the bag that fits your machine.)
Cutting block oil for cross-cut units
Stock # 35250
Insert plug in power outlet
–
Install waste bag for shredded material
– Open front door and completely remove
bag frame from cabinet
5. Installation
– Fold new bag around frame.
Allow bag to overhang frame by
approximately 7" (20 cm).
– Slide frame with bag back into cabinet
– Close cabinet door.
–
–
–
–
–
Refer to separate set–up instructions for proper
assembly
Operate this product only from the type of
power source indicated on the marking label
Install the paper shredder so that the plug is
easily accessible
Switching equipment ON
Shredder must be operated only in upright
position
1
– Press rocker switch to pos. 1
Set up paper shredder so that the ventilation
slots are unobstructed. To ensure sufficient
ventilation of the shredder a minimum distance
of 4" (10 cm) to the wall or to the furniture must
be maintained.
• Switch locks in "on" position
• Equipment is ready for operation
(stand by)
• Green LED lights
– Feed paper
• The shredding process is started by
photo–cells in the paper feed opening.
Insert paper and shredding begins
automatically.
• When the shredding is complete, the
cutting system automatically stops
after approx. 3 sec.
6. Caution
Never insert hand, fingers or any
foreign objects into the feed
opening.
Serious injury may result.
Keep all loose articles of
clothing, ties, jewelery, long hair
or other loose objects away from
feed opening.
Switching equipment OFF
– Press rocker switch to pos. 2
• Switch resets to center position and the
2
Injury may result.
machine is turned off.
Always turn off and unplug the
machine before moving,
servicing, cleaning or any other
conduct other than normal
operation.
Feeding continuous forms
– Pass the leading edge of the form under
the paper guide roller (1) and into the
paper feed opening (2).
Serious injury may result.
Before start-up
1
2
– Undo the wing screws securing the unit
during transportation
6
Edition 02/02
USA
480
480 CC
480 HS
Paper shredder
Motor Overheating
Red LED lights
8. Checklist for Inoperative Machine
If the equipment does not work properly,
please check the following points first:
Paper shredder switches off automati-
cally.
–
–
–
–
Is the plug inserted?
Is the switch turned on?
Is the cabinet door closed?
Is waste receptacle full?
• Tap rocker switch pos. 2
➪
Rocker switch resets to zero
position
2
Empty waste bag.
Is there a paper jam in the shredder?
Is the motor overheated?
• Allow shredder to cool down for
approximately 15-20 minutes.
–
–
1
Switch machine off and allow motor to
cool down for approximately 15–20 min.
• Return switch to "on" position (1)
and continue shredding.
If none of the above applies and the equipment stil
does not run, please contact our customer service
department.
Cabinet door ajar / bag full
Red LED lights
Paper shredder switches off automati-
cally.
9. Malfunctions
• Tap rocker switch pos. 2
Paper jam
➪
Rocker switch resets to zero
position
2
Red LED lights
• Make sure cabinet door is properly
closed and/or empty waste bag.
• Press and hold down rocker switch in
pos. 2 to reverse the cutting system
and back out jammed material
1
• Return switch to "on" position (1) and
continue shredding.
2
(paper is pushed out)
10. Maintenance
Caution!
Do not attempt to force the jammed
material through the machine by
alternating the cutting system between
(Cross cut unit only)
1
forward and reverse
2
– When shredding capacity drops or the
noise increases
• Spray special cutting block oil onto
cutting system
• Remove excess paper
• Return switch to pos. 1 and continue
shredding in smaller quantities so as
not to jam the machine further
1
1
2
• Run cutting system forward and
backward several times without feeding
paper
Note:
• Continue shredding
The 480 HS will not run forward again
unless the jammed material has been
completely removed from the throat
Edition 02/02
7
USA
480
480 CC
480 HS
Paper shredder
11. Warranty
12. Customer Service
FELLOWES® POWERSHRED LIMITED
WARRANTY
United States
Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143
1 year on all parts and labor
Tel.: 1-800-955-0959
5 years parts and labor on cutting cylinders
Canada
Fellowes® warrants this product to be free from
defects in material and workmanship for a
period of one year from the date of purchase by
the original consumer. At it's option, Fellowes®
will repair or replace without charge for material
or labor, any component found to be defective
during the warranty period. Additionally, the
cutting cylinders are warranted for 5 years from
the original purchase date and will be replaced
without charge for material or labor if found by
Fellowes® to be defective.
Fellowes Manufacturing of Canada Ltd.
2750 John Street
Markham, Ontario L3R 2W4
Tel.: 1-800-665-4339
United Kingdom
Fellowes Manufacturing UK Ltd.
Doncaster Road
Kirk Sandall
Doncaster, South Yorkshire DN3 1HT
Tel.: 01302-885 331
Warranty Exclusions
Australia
Fellowes Manufacturing (Australia) Pty.Ltd.
10 Fellowes Court
Tullamarine, Victoria 3043
The parties agree that the buyer's sole and
exclusive remedy against Fellowes® shall be for
the repair or replacement of defective parts as
provided herein. The buyer agrees that no
other remedy (including, but not limited to,
incidental or consequential damages for lost
profits, lost sales, injury to property or any other
incidental or consequential loss) shall be
available to him. This warranty shall NOT apply
and is void under the following circumstances:
1. When this product or any part thereof has been
subjected to accident, alteration, abuse, or
misuse.
Tel.: (03) 9330-3211 in Melbourne
1-800-331-177 outside Melbourne
Nederland
Fellowes
P.O. Box 180
4130 Ed Vianen
Nederland
Tel.: 0347-377988
Germany
2. When the original Model and Serial Number
Plate has been altered, effaced or removed.
3. When repair or service covered under this
warranty (other than routine maintenance
(as described in the Owner's Manual) has been
performed by personnel without the express
written consent of Fellowes®.
Fellowes GmbH
Dieselstraße 27
D-30827 Garbsen
Tel.: 05131-49770
France
Fellowes Lynx S.A.
194 allée de la Croix des Hormes
69250 Montanay
4. When the product has been used pursuant to
any verbal or written rental, lease or loan
agreement.
Tel.: 33-72-08-25-50
THIS WARRANTY DESCRIBED HEREIN SHALL
BE IN LIEU OF ANY OTHER WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ANY REPRESENTA-
TIONS OR PROMISES INCONSISTENT WITH OR
IN ADDITION TO THIS WARRANTY ARE
UNAUTHORIZED AND SHALL NOT BE BINDING
UPON FELLOWES.
8
Edition 02/02
USA
|