Home Comfort
Through-The-Wall
Air Conditionerꢀ
FFTA1033Q1
Product Dimensions
Height
Width
Depth
14-1/2"
24"
20-1/2"
More Easy-To-Use Features
Sleep Mode
With Sleep Mode, the temperature
gradually increases a few degrees over
the evening, saving energy and creating
a comfortable environment during the
evening hours.
ENERGY STAR®-Qualified
Use less energy than standard air
conditioners reducing your energy usage,
and ultimately lowering your utility bills.
Remote Control
Offers you the flexibility to control the
temperature and fan speed from anywhere
in the room.
Effortless™ Clean Filter
Our antibacterial filter reduces bacteria,
room odors and other airborne particles
for a healthier, more comfortable
environment.
Power Cord
Comes with an extra long three-prong cord
— makes extension cords unnecessary.
Effortless™ Restart
Automatically resumes operating at its
previous settings when power is restored
to your unit.
Clean Filter Alert
Signature Features
Alert notifies you when your filter needs
to be cleaned so you don’t have to keep
track of it yourself.
Effortless™ Remote
Temperature Control
Remote control thermostat precisely
maintains preset room temperature, so
you can remain comfortable at all times.
Energy Saver Mode
Ready-Select® Controls
Easily select options with the touch of
a button.
Reduce your utility bills in this mode. It
cools similarly to central air, with the unit
turning on and off at different intervals
to ensure the room temperature stays at
the set temperature.
ENERGY STAR®
Programmable 24-Hour
On/Off Timer
Multi-Speed Fan
Features three different fan speeds, for
more cooling flexibility.
Performance
BTUs
Cool
10,000
With the 24-Hour On/Off Timer, you
can ensure your home will be cool and
comfortable when you want it to be
without having to worry about running
up your utility bills. The built-in timer
allows you to preset the unit to turn on
and off in half-hour increments.
frigidaire.com
Home Comfort
FFTA1033Q1 Through-The-Wall Air Conditioner
Plug Type (NEMA)
5-15P
Home Comfort Specifications
Replacement Installation
• Product Shipping Weight (approx.) – 79 Lbs.
• When replacing existing air conditioner with new unit, refer to
Product Installation Guide on web to identify existing wall-sleeve
manufacturer and size compatibility. If proper installation and slope
are suspect, then correct installation of Frigidaire® Through-The-Wall
18" Sleeve Kit PNꢀ#EA108T recommended.
• An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (ANSI/NFPA 70)
and local codes & ordinances.
• Use of existing wall sleeve to mount new unit requires original sleeve
be in sound structural condition with rear grille that attaches securely,
or rear flange that serves as stop for unit.
• Preferable installation option, for increased efficiency and possibility
of drafts reduced, requires existing rear grille (mounted to sleeve) be
replaced with new unit’s rear air-directional louvered grille (provided
in accessory kit, shipped with unit). Non-preferable installation option
of directly mounting rear louvered grille to unit can be considered,
requiring grille be mounted to unit prior to sleeve installation.
• Existing decorative exterior grille may be left in place, provided that
proper air-directional rear louvered grille is installed.
• For installation into larger existing sleeve, optional Trim Kit
PNꢀ# EA120T available.
• Voltage Rating – 115Vꢀ/ꢀ60 Hzꢀ/ꢀ15 Amps
• Amps @ 115 Volts = 9.8 Amps
• Recommended Circuit Breaker – 15 Amps
• Unit equipped with 115V 3-wire power supply cord, NEMA plug type
5-15P, approximately 72" long.
• Unit’s increased performance characteristics result from two rear
intakes. For unit to operate at maximum efficiency, carefully follow
complete, detailed new or replacement installation instructions
provided in Product Installation Guide on web.
• Unit requires rearward slope when installation is complete, to allow
condensate to drain from rear of sleeve.
New Installation
• For new installation, Frigidaire® Through-The-Wall 18" Sleeve Kit
PNꢀ#EA108T available. Recommended for proper installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
• Through-the-wall installation requires 18" maximum wall thickness.
Optional Accessories
• For energy-saving purposes, install unit in shady location, preferably
a northern exposure; and do not block airflow inside with blinds,
curtains or furniture; or outside with shrubs, enclosures or other
buildings.
• Through-The-Wall 18" Sleeve Kit – (PNꢀ# EA108T).
• Trim Kit (for larger existing sleeve) – (PNꢀ# EA120T).
• Architectural-Style Exterior Louvered Grille – (PNꢀ# EA109T).
•
•
•
•
USA 10200 David Taylor Drive Charlotte, NC 28262 1-800-FRIGIDAIRE frigidaire.com
Specifications
subject to change.
•
•
•
•
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 frigidaire.ca
FFTA1033Q1 01/14
Download from Www.©So20m14anEluecatlrso.lcuxomHo.mAellPMroaduncutsa,lIsncS. earch And Download.
|